For feedback and comments:
documentation.feedback@alcatel-lucent.com

Table of Contents Previous Next PDF


Show Commands
gmpls
Syntax
gmpls
Context
show>router>gmpls
Description
This command displays RSVP status information for the GMPLS instance of RSVP.
lsp
Syntax
lsp [lsp-name] [status {up | down}] [detail]
lsp [lsp-name] path [path-name] [type {working | protect}] [detail]
lsp [lsp-name] [status {up | down}] to ip-address [detail]
Context
show>router>gmpls
Description
This command displays gLSP information.
Parameters
lsp-name
Specifies the identifier for the GMPLS LSP. The LSP name can be up to 32 characters long and must be unique.
status
Specifies that the command display only LSPs that are either operationally up or down.
Values
up — Display only LSPs that are operationally up.
down — Display only LSPs that are operationally down.
path-name
Specifies a unique case-sensitive name label for the LSP path.
Values
type
Specifies that the command display only paths that are either working or protect.
Values
working — Display only working paths.
protect — Display only protect paths.
to ip-address
Specifies the system IP address of the far-end UNI-C router for the GMPLS LSP.
detail
Keyword to request more detailed output.
peer
Syntax
peer [peer-node-id] [detail]
peer [peer-node-id] {statistics}
Context
show>router>gmpls
Description
This command displays GMPLS peer information.
Parameters
peer-node-id
Specifies the control plane node ID of the neighboring GMPLS UNI-N node. This can be an IP address or a 32-bit unsigned integer.
Values
detail
Keyword to request more detailed output.
statistics
Keyword to request peer statistics.
path
Syntax
path [path-name]
Context
show>router>gmpls
Description
This command displays GMPLS path information.
Parameters
path-name
Specifies a unique case-sensitive name label for the LSP path.
Values
session
Syntax
session [session-type] [from ip-address] [to ip-address] [session-name session-name] [status {up | down}] [detail]
Context
show>router>gmpls
Description
This command displays GMPLS session information.
Parameters
session-type
Keyword to display information about the session type.
from ip-address
Specifies the system IP address of the near-end UNI-C router.
to ip-address
Specifies the system IP address of the far-end UNI-C router.
session-name
Specifies the name of the GMPLS session.
status
Specifies that the command display only GMPLS sessions that are either operationally up or down.
Values
up — Display only sessions that are operationally up.
down — Display only sessions that are operationally down.
detail
Keyword to request more detailed output.
te-link
Syntax
te-link [te-link-id]
Context
show>router>gmpls
Description
This command displays Traffic Engineering (TE) link information.
Parameters
te-link-id
Specifies the ID or name of the configured TE Link.
Values
1 — 4294967295 | te-link-name
te-link-name
: 32 character maximum name of the TE Link
gmpls-tun-grp
Syntax
gmpls-tun-grp [gmpls-tunnel-group-id] [using]
Context
show
Description
This command displays GMPLS tunnel group status and lists the gLSPs bound to each tunnel group.
Parameters
id group-id
Specifies that only GMPLS tunnel groups of the configured ID are displayed.
using
Keyword to display information about which IP interfaces are using the tunnel groups.
member
Syntax
member [member-id]
Context
show>gmpls-tun-grp gmpls-tunnel-group-id
Description
This command displays member information for the specified GMPLS tunnel group.
Parameters
member-id
Specifies the ID of the GMPLS tunnel group member.
Values
peer
Syntax
peer [peer-node-id] [detail]
Context
show>router>lmp
Description
This command displays LMP peer information.
Parameters
peer-node-id
Specifies the unique identifier for the LMP peer node.
detail
Keyword to display more detailed output.
Output
Peer Output Fields
The following table describes peer output fields.
Sample Output
A:ALA-1# show router lmp peer 16843009
================================================================================
LMP Peer 1.1.1.1 (16843009)
================================================================================
Admin State:   : Out of Service         Oper State      : Down
Retrans Intvl  : 5000 ms                Retry Limit     : 6
================================================================================
A:ALA-1#
control-channel
Syntax
control-channel lmp-cc-id [detail]
Context
show>router>lmp>peer
Description
This command displays LMP control channel information for a specific peer.
Parameters
lmp-cc-id
Specifies the unsigned integer identifier for the control channel
Values
detail
Keyword to display more detailed output.
Output
Control Channel Output Fields
The following table describes control channel output fields.
Sample Output
A:ALA-1# show router lmp peer 16843009 control-channel 1
================================================================================
LMP Control Channel 1 Statistics
================================================================================
Admin State:   : Out of Service         Oper State      : Going Down
Remote Id      : 10                     Setup Role      : Active
Hello Interval : 3000                   Hello Dead Intv : 10000
Peer If Addr   : 100.100.100.100
Inbound Errors : 100                    Outbound Errors : 50
--------------------------------------------------------------------------------
Message Type              Received                Sent       Retransmitted
--------------------------------------------------------------------------------
Config                        1111                  11                 111
ConfigAck                       15                   6                 N/A
ConfigNack                       1                   2                 N/A
Hello                           40                  20                 N/A
LinkSummary                   6000                 500                  10
LinkSummaryAck                  35                  30                 N/A
LinkSummaryNack                400                3000                 N/A
================================================================================
A:ALA-1#
 
te-link
Syntax
te-link [te-link-id] [detail]
te-link te-link-id statistics
Context
show>router>lmp
Description
This command displays Traffic Engineering (TE) link information.
Parameters
te-link-id
Specifies the ID of a TE Link.
Values
1 — 4294967295 | te-link-name
te-link-name
: 32 character (max) name of the TE Link
detail
Keyword to display more detailed output.
statistics
Keyword to display TE Link statistics.
Output
TE Link Output Fields
The following table describes TE link output fields.
Sample Output
*A:SRU4>show>router>lmp# te-link 254
================================================================================
LMP TE Link 254 (Name) Statistics
================================================================================
Admin State   : In Service              Oper State   : Degraded
Remote Id     : 10                      Peer Node Id : 15
--------------------------------------------------------------------------------
Message Type              Received                Sent       Retransmitted
--------------------------------------------------------------------------------
LinkSummary                    100                 100                 600
LinkSummaryAck                  30                  25                 N/A
LinkSummaryNack                 70                  75                 N/A
================================================================================
 
data-bearer
Syntax
data-bearer [data-bearer-id] [detail]
Context
show>router>lmp>te-link
Description
This command displays LMP data bearer information.
Parameters
data-bearer-id
Specifies the ID of a data bearer link.
detail
Keyword to display more detailed output.
Output
Data Bearer Output Fields
The following table describes data bearer output fields.
Sample Output
*A:SRU4>show>router>lmp>te-link# data-bearer 254
================================================================================
LMP Data Bearer Link 254 Statistics
================================================================================
Admin State   : In Service              Oper State   : Up Free
Remote Id     : 10                      Port         : 1/1/1
================================================================================
 
Clear Commands
statistics
Syntax
statistics
Context
clear>router>gmpls>peer
Description
This command clears control packet statistics.
 
Debug Commands
gmpls
Syntax
gmpls [lsp lsp-name] [sender sender-address] [endpoint endpoint-address] [tunnel-id tunnel-id] [lsp-id lsp-id] [peer peer-node-id]
no gmpls
Context
debug>router
Description
This command enables and configures debugging for GMPLS.
The no form of the command disables debugging for GMPLS.
Parameters
lsp-name
Debug all GMPLS instances that contain the specified LSP. 80 characters max.
sender-address
Debug all GMPLS instances that contain the specified sender IP address, in dotted decimal notation.
Values
endpoint-address
Debug all GMPLS instances that contain the specified endpoint IP address, in dotted decimal notation.
Values
tunnel-id
Debug all GMPLS instances that contain the specified identifier of a tunnel.
Values
lsp-id
Debug all GMPLS instances that contain the specified identifier of an LSP.
Values
peer-node-id
Debug all GMPLS instances that contain the specified identifier or IP address of a peer node.
Values
event
Syntax
[no] event
Context
debug>router>gmpls
Description
This command enables and disables debugging for specific GMPLS events.
all
Syntax
[no] all
Context
debug>router>gmpls
Description
This command enables and disables debugging for GMPLS All events.
lsp-setup
Syntax
[no] lsp-setup
Context
debug>router>gmpls
Description
This command enables and disables debugging for GMPLS LSP Setup events.
misc
Syntax
[no] misc
Context
debug>router>gmpls
Description
This command enables and disables debugging for GMPLS Misc events.
path
Syntax
[no] path
Context
debug>router>gmpls
Description
This command enables and disables debugging for GMPLS Path events.
peer
Syntax
[no] peer
Context
debug>router>gmpls
Description
This command enables and disables debugging for GMPLS NBR events.
resv
Syntax
[no] resv
Context
debug>router>gmpls
Description
This command enables and disables debugging for GMPLS Resv events.
rr
Syntax
[no] rr
Context
debug>router>gmpls
Description
This command enables and disables debugging for GMPLS Refresh Reduction events.
packet
Syntax
[no] packet
Context
debug>router>gmpls
Description
This command enables and disables debugging for specific GMPLS packets.
hello
Syntax
hello [detail]
no hello
Context
debug>router>gmpls>packet
Description
This command enables debugging for GMPLS Hello packets.
The no form of the command disables debugging for GMPLS Hello packets.
Parameters
detail
Keyword to produce debug output in greater detail.
path
Syntax
path [detail]
no path
Context
debug>router>gmpls>packet
Description
This command enables debugging for GMPLS Path packets.
The no form of the command disables debugging for GMPLS Path packets.
Parameters
detail
Keyword to produce debug output in greater detail.
patherr
Syntax
patherr [detail]
no patherr
Context
debug>router>gmpls>packet
Description
This command enables debugging for GMPLS PathErr packets.
The no form of the command disables debugging for GMPLS PathErr packets.
Parameters
detail
Keyword to produce debug output in greater detail.
pathtear
Syntax
pathtear [detail]
no pathtear
Context
debug>router>gmpls>packet
Description
This command enables debugging for GMPLS PathTear packets.
The no form of the command disables debugging for GMPLS PathTear packets.
Parameters
detail
Keyword to produce debug output in greater detail.
resv
Syntax
resv [detail]
no resv
Context
debug>router>gmpls>packet
Description
This command enables debugging for GMPLS Resv packets.
The no form of the command disables debugging for GMPLS Resv packets.
Parameters
detail
Keyword to produce debug output in greater detail.
resverr
Syntax
resverr [detail]
no resverr
Context
debug>router>gmpls>packet
Description
This command enables debugging for GMPLS ResvErr packets.
The no form of the command disables debugging for GMPLS ResvErr packets.
Parameters
detail
Keyword to produce debug output in greater detail.
resvtear
Syntax
resvtear [detail]
no resvtear
Context
debug>router>gmpls>packet
Description
This command enables debugging for GMPLS ResvTear packets.
The no form of the command disables debugging for GMPLS ResvTear packets.
Parameters
detail
Keyword to produce debug output in greater detail.
notify
Syntax
notify [detail]
no notify
Context
debug>router>gmpls>packet
Description
This command enables debugging for GMPLS Notify packets.
The no form of the command disables debugging for GMPLS Notify packets.
Parameters
detail
Keyword to produce debug output in greater detail.
ack
Syntax
ack [detail]
no ack
Context
debug>router>gmpls>packet
Description
This command enables debugging for GMPLS Ack packets.
The no form of the command disables debugging for GMPLS Ack packets.
Parameters
detail
Keyword to produce debug output in greater detail.
srefresh
Syntax
srefresh [detail]
no srefresh
Context
debug>router>gmpls>packet
Description
This command enables debugging for GMPLS Srefresh packets.
The no form of the command disables debugging for GMPLS Srefresh packets.
Parameters
detail
Keyword to produce debug output in greater detail.
bundle
Syntax
bundle [detail]
no bundle
Context
debug>router>gmpls>packet
Description
This command enables debugging for GMPLS Bundle packets.
The no form of the command disables debugging for GMPLS Bundle packets.
Parameters
detail
Keyword to produce debug output in greater detail.
all
Syntax
all [detail]
no all
Context
debug>router>gmpls>packet
Description
This command enables debugging for GMPLS All packets.
The no form of the command disables debugging for GMPLS All packets.
Parameters
detail
Keyword to produce debug output in greater detail.
Tools Commands
gmpls-tun-grp
Syntax
gmpls-tun-grp gmpls-tunnel-group-id
Context
tools>dump
Description
This command dumps information about a GMPLS tunnel group.
Parameters
gmpls-tunnel-group-id
The identifier of the GMPLS tunnel group.
Values
Sample Output
*A:Dut-A-UNI-C# tools dump gmpls-tun-grp  1
 
TunnelGrpId 1: (Up/Up), Port gmpls-tun-grp-1 (Up/Up), mode load-sharing
Type: Head, far-end: 52.52.52.52, bw 40000000, memThreshold 0, portId 0x5c000001
NumMems: 5/4/0(0), Up/Dn 1/0, active 0x1e, present 0x1e iom 0x2 Mtu 9212
gmplsUpd: 8 (000 01:11:23.350), Now: 000 08:34:12.970
  memId 1: (Up/Dn), session: 1::1, reg: Y
     DnReasons: wpLspDn
   Work: N/A (Ghost), status: Dn, Cnt(Up/Dn/PortChg): 0/0/0
    lspState Dn, lspUpd: 0 (000 00:00:00.000), rsrcAdded N
  memId 2: (Up/Up), session: 1::empty, reg: Y
   Work: 1/2/1 (Up), status: Up, Cnt(Up/Dn/PortChg): 1/0/1
    lspState Up, lspUpd: 1 (000 01:10:14.720), rsrcAdded Y
  memId 3: (Up/Up), session: 2::empty, reg: Y
   Work: 1/2/2 (Up), status: Up, Cnt(Up/Dn/PortChg): 1/0/1
    lspState Up, lspUpd: 1 (000 01:10:23.650), rsrcAdded Y
  memId 4: (Up/Up), session: 3::empty, reg: Y
   Work: 1/1/14 (Up), status: Up, Cnt(Up/Dn/PortChg): 1/0/1
    lspState Up, lspUpd: 1 (000 01:10:05.880), rsrcAdded Y
  memId 5: (Up/Up), session: 4::empty, reg: Y
   Work: 1/1/13 (Up), status: Up, Cnt(Up/Dn/PortChg): 1/0/1
    lspState Up, lspUpd: 1 (000 01:09:50.710), rsrcAdded Y
 
  Sorted list of 4 member port(s):
  1/1/13 1/1/14 1/2/1 1/2/2
 
*A:Dut-A-UNI-C# tools dump gmpls-tun-grp  1
clear
 
*A:Dut-A-UNI-C# tools dump gmpls-tun-grp  1 clear
 
TunnelGrpId 1: (Up/Up), Port gmpls-tun-grp-1 (Up/Up), mode load-sharing
Type: Head, far-end: 52.52.52.52, bw 40000000, memThreshold 0, portId 0x5c000001
NumMems: 5/4/0(0), Up/Dn 1/0, active 0x1e, present 0x1e iom 0x2 Mtu 9212
gmplsUpd: 8 (000 01:11:23.350), Now: 000 08:34:20.390
  memId 1: (Up/Dn), session: 1::1, reg: Y
     DnReasons: wpLspDn
   Work: N/A (Ghost), status: Dn, Cnt(Up/Dn/PortChg): 0/0/0
    lspState Dn, lspUpd: 0 (000 00:00:00.000), rsrcAdded N
  memId 2: (Up/Up), session: 1::empty, reg: Y
   Work: 1/2/1 (Up), status: Up, Cnt(Up/Dn/PortChg): 1/0/1
    lspState Up, lspUpd: 1 (000 01:10:14.720), rsrcAdded Y
  memId 3: (Up/Up), session: 2::empty, reg: Y
   Work: 1/2/2 (Up), status: Up, Cnt(Up/Dn/PortChg): 1/0/1
    lspState Up, lspUpd: 1 (000 01:10:23.650), rsrcAdded Y
  memId 4: (Up/Up), session: 3::empty, reg: Y
   Work: 1/1/14 (Up), status: Up, Cnt(Up/Dn/PortChg): 1/0/1
    lspState Up, lspUpd: 1 (000 01:10:05.880), rsrcAdded Y
  memId 5: (Up/Up), session: 4::empty, reg: Y
   Work: 1/1/13 (Up), status: Up, Cnt(Up/Dn/PortChg): 1/0/1
    lspState Up, lspUpd: 1 (000 01:09:50.710), rsrcAdded Y
 
  Sorted list of 4 member port(s):
  1/1/13 1/1/14 1/2/1 1/2/2
 
 
peer
Syntax
peer peer-node-id
Context
tools>dump>router>lmp
Description
This command dumps information about a specific LMP peer.
Parameters
peer-node-id
An identifier for the LMP peer node. This may be an IPv4-formatted address or a 32-bit unsigned integer.
Values
control-channel
Syntax
control-channel lmp-cc-id
Context
tools>dump>router>lmp>peer
Description
This command dumps information about a control channel of an LMP peer.
Parameters
lmp-cc-id
An unsigned integer identifier for the control channel.
Values
Sample Output
*A:Dut-B-UNI-C>tools>dump>router>lmp# peer 10.27.255.21
10.27.255.213  10.27.255.219
*A:Dut-B-UNI-C>tools>dump>router>lmp# peer 10.27.255.21 control-channel 7001
MINOR: CLI peer 10.27.255.21 is not configured.
*A:Dut-B-UNI-C>tools>dump>router>lmp# peer 10.27.255.21                     
10.27.255.213  10.27.255.219
*A:Dut-B-UNI-C>tools>dump>router>lmp# peer 10.27.255.213 control-channel
<lmp-cc-id>
7001
 
*A:Dut-B-UNI-C>tools>dump>router>lmp# peer 10.27.255.213 control-channel 7001
 
Local: 7001, Remote: 7004, State Up/Up, Nbr  10.27.255.213
Dst: 10.27.255.213, Nh: 172.21.36.173, EgrIfIndex: 3, Src: 52.52.52.52
   Hello 1000/1000, Dead 3000/3000, Seq (Tx/Rx/Ack) 57995/16109/57995
   LastEvt: rxHello, Tmrs: Hello Hold
   Cntrs: Errs(in/out) 0/0, Rx: cfg/Ack/Nack/Hello: 6/14/0/57887
   Cntrs: Tx: cfg/Ack/Nack/Hello: 14(30)/0/0/57995, reTxCnt: 0
   RxCfg: 7004: 1000/3000, RxNack: 0: 0/0
   TxMsgId: 44, RxMsgId(cfg/ack/nack): 1/44/0
   LkSum Cntrs (sum/ack/nack) Tx: 11654(216)/11620/0, Rx: 11724/11858/0
   Now: 000 16:19:13.900
  Seq  Event       prevState  state    TxPkt        Time      
  ===  ==========  ========  ========  =====  ================
  009     rxHello    Active        Up    ---  000 09:40:02.410
  010     holdTmr        Up    CfgSnd    Cfg  000 10:15:14.410
  011     reTxTmr    CfgSnd    CfgSnd    Cfg  000 10:15:14.900
  012       rxAck    CfgSnd    Active  Hello  000 10:15:23.040
  013     rxHello    Active        Up    ---  000 10:15:24.020
  014     holdTmr        Up    CfgSnd    Cfg  000 10:35:15.070
  015       rxAck    CfgSnd    Active  Hello  000 10:35:15.080
  016     rxHello    Active        Up    ---  000 10:35:16.060
  017     holdTmr        Up    CfgSnd    Cfg  000 10:45:20.090
  018       rxAck    CfgSnd    Active  Hello  000 10:45:20.100
  019     rxHello    Active        Up    ---  000 10:45:21.080
  000     holdTmr        Up    CfgSnd    Cfg  000 10:50:21.480
  001       rxAck    CfgSnd    Active  Hello  000 10:50:21.490
  002     rxHello    Active        Up    ---  000 10:50:22.480
  003     holdTmr        Up    CfgSnd    Cfg  000 11:05:23.550
  004       rxAck    CfgSnd    Active  Hello  000 11:05:23.560
  005     rxHello    Active        Up    ---  000 11:05:24.540
  006     holdTmr        Up    CfgSnd    Cfg  000 11:40:33.600
  007       rxAck    CfgSnd    Active  Hello  000 11:40:33.610
  008     rxHello    Active        Up    ---  000 11:40:34.600
 
 
te-link
Syntax
te-link te-link-id
Context
tools>dump>router>lmp
Description
This command dumps information about a TE link.
Parameters
te-link-id
The identifier of the TE link.
Values
Sample Output
*A:Dut-B-UNI-C>tools>dump>router>lmp# te-link 1010701
 
Local 1010701 (), State Up/Up, Remote: 1010701, db 1(1), resv 0, msgId 11871
  Cntrs (sum/ack/nack) Tx: 2912(8)/2906/0, Rx: 2906/2914/0, Up/Dn: 14/13
  LastEvt: ackRxSm (000 16:19:18.070), Now: 000 16:19:33.270
  LastRxLkSum: Id 1010701, dbCnt 1, ErrCode 0x0, Flags: 0x0
   RxDb: Id(L/R) 101070117/101070117, Flags: 0x3
    SubObj: type/len/sw/enc: 1/12/125/2, Kbps(Min/Max): 10000000/10000000
  LastRxLkSumNack: msgId 0, dbCnt 0, ErrCode 0x0, Flags: 0x0
  Db Links:
    1010701-101070117 (1/1/13): State Up/UpAlloc, port Up/Up RemoteId: 101070117,
     Alloc Y, bw 10000000, portBw 10000000/10000000, tunGrp 1, cfg: Y, Lpc: Y
     Alloc (Cnt/Tm): 3/000 10:16:21.770, Free 2/000 10:15:32.050
     Cnt(Up/Dn): 1/0, UpDnTm: 000 00:10:55.310
 
 
lsp
Syntax
lsp [lsp-name] [detail]
Context
tools>dump>router>gmpls
Description
This command dumps information about LSPs. Configuring the lsp-name parameter will only dump information about the specified LSP.
Parameters
lsp-name
The name of the LSP. 32 characters max.
detail
Keyword to output information in greater detail.
Sample Output
*A:Dut-B-UNI-C>tools>dump>router>gmpls# lsp "D1"
LSP "D1",  LspIndex: 1,  Type: GMPLS-UNI,  AdminState: UP,  OperState: UP,  Flags: 0x0
Total LSP Count: 1
 
*A:Dut-B-UNI-C>tools>dump>router>gmpls# lsp "D1" detail
=================================================================================
LSP "D1",  LspIndex: 1
  Type: GMPLS-UNI,  AdminState: UP,  OperState: UP, Flags: 0x0
  LastChange: 02/04/2015 23:30:34
  TimeSinceLastOperChange: 0d 15:07:19
  NumWorkingPaths: 1,  NumProtectPaths: 0
  NumWorkingPathsUp: 1,  NumProtectPathsUp: 0
 
----------------------------------------------------------------------------------
LspPath  PathIndex: 2,  Type: Working
  AdminState: UP,  OperState:Up,  Flags: 0x0
  LastChange: 02/04/2015 23:30:34
  TimeSinceLastOperChange: 0d 15:07:19
  LspId: 296,  SessionName: D1::2
  CurrState: LSP_PATH_UP,  PrevState: LSP_PATH_INIT
  RetryCount: 107,  FailNode: 0.0.0.0,  FailCode: none
  Peer: 0.0.0.0
  PSB: vrId: 1 Session (To: 72.72.72.72 - 1 - 52.52.52.52), Sender (52.52.52.52 - 296)
  Actual Hops:
    Hop 1 : Unnumbered RouterId 52.52.52.52, InterfaceId 1010702
            UpStreamLabel 0, DnStreamLabel 101070217, Flags 0x0
    Hop 2 : Unnumbered RouterId 10.27.255.213, InterfaceId 1010702
            UpStreamLabel 101070217, DnStreamLabel 0, Flags 0x0
            SRLG List  27     
    Hop 3 : Unnumbered RouterId 10.27.255.213, InterfaceId 13000
            UpStreamLabel 0, DnStreamLabel 101070230, Flags 0x0
            SRLG List  4      
    Hop 4 : Unnumbered RouterId 10.27.255.219, InterfaceId 13001
            UpStreamLabel 101070230, DnStreamLabel 0, Flags 0x0
    Hop 5 : Unnumbered RouterId 10.27.255.219, InterfaceId 1010702
            UpStreamLabel 0, DnStreamLabel 101070217, Flags 0x0
            SRLG List  27     
    Hop 6 : Unnumbered RouterId 72.72.72.72, InterfaceId 1010702
            UpStreamLabel 101070217, DnStreamLabel 0, Flags 0x0
=================================================================================
Total LSP Count: 1
 
path
Syntax
path [path-name] [detail]
Context
tools>dump>router>gmpls
Description
This command dumps information about paths. Configuring the path-name parameter will only dump information about the specified path.
Parameters
path-name
The name of the path. 32 characters max.
detail
Keyword to output information in greater detail.
Sample Output
*A:Dut-B-UNI-C>tools>dump>router>gmpls# path
<path-name>
"empty"  "2"      "3"      "5"
detail
 
*A:Dut-B-UNI-C>tools>dump>router>gmpls# path "2"
Path "2",  PathIndex: 2,  NumHops: 2,  LspPathCount: 1,  EmptyPathLspBindCount: 0, Flags: 0x0
Total Path Count: 1
 
*A:Dut-B-UNI-C>tools>dump>router>gmpls# path "2" detail
-------------------------------------------------------------------------------
Path "2",  PathIndex: 2
  AdminState: UP,  OperState:UP
  LastChange: 02/04/2015 23:30:34
  NumHops: 2,  LspPathCount: 1,  EmptyPathLspBindCount: 0, Flags: 0x0
    Hop: 1,  NodeId: 52.52.52.52,  TeLinkId: 1010702,  Loose
      LastChange: 02/04/2015 23:30:34
    Hop: 2,  NodeId: 10.27.255.219,  TeLinkId: 1010702,  Strict
      LastChange: 02/04/2015 23:30:34
-------------------------------------------------------------------------------
Total Path Count: 1
 
peer
Syntax
peer [peer-node-id] [detail]
Context
tools>dump>router>gmpls
Description
This command dumps information about peer nodes. Configuring the peer-node-id parameter will only dump information about the specified peer node.
Parameters
peer-node-id
The identifier of the peer node.
Values
detail
Keyword to output information in greater detail.
Sample Output
*A:Dut-B-UNI-C>tools>dump>router>gmpls# peer 10.27.255.213
PEER: vrId 1 PeerAddr 10.27.255.213,  AdminState: UP,  OperState: UP,  HelloState: UP
Total Peer Count: 1
 
*A:Dut-B-UNI-C>tools>dump>router>gmpls# peer 10.27.255.213 detail
PEER vrId 1 PeerAddr 10.27.255.213
  AdminState: UP,  OperState:UP,  OperDownReason: N/A
  LastChange: 02/04/2015 23:30:34,  UpTime: 0d 15:12:39
  HelloInterval: 3000msecs, LspHoldTime: 60secs
  Flags: 0x30,  HelloState: Up
  SrcInst: 0xffffff16,  DstInst: 0x54d2ba31,  PrevSrcInst: 0xffffff16
  PeerDownCount: 13,  InstMismatchCount: 2,  TimeoutCount: 0
 
  Source: 52.52.52.52,  Dest: 10.27.255.213  NextHop: 172.21.36.173 [If: 3]
  Status: Up,  MTU: 0,  NumChngInNextHop: 0,  LastChange: 02/05/2015 10:53:24
 
  GrHEpoch: 0x5b298,  RestartTime: 4294967295,  RecoveryTime: 90000
  PrevDstInst: 0x0,  InvokedCount: 12,  ScanEvent: N [N N]
 
  RefreshReduction:
    Local  - MsgId: Enabled,  AckDesired: Enabled,  Srefresh: Enabled, Epoch: 3236554
    Remote - MsgId: Supported,  Srefresh: Supported,  Epoch: 13810201,  HighestMsgIdRx: 3670
    NumTxMsgIds: 4,  NumRxMsgIds: 4
    NumOutOfOrderMsg: 0, NumRetransmittedMsg: 11,  NumPendingAckNack: 0
    NextSrefresh: 9sec
 
  DownstreamSessionCount: 2,  UpstreamSessionCount: 2
  Path Timeouts: 0,  Resv Timeouts: 0
 
  Packet Statistics:
    Hello Tx   : 17                Hello Rx   : 19338          
    Path Tx    : 194               Path Rx    : 424            
    PathErr Tx : 0                 PathErr Rx : 183            
    PathTear Tx: 5                 PathTear Rx: 2              
    Resv Tx    : 22                Resv Rx    : 58             
    ResvErr Tx : 2                 ResvErr Rx : 0              
    ResvTear Tx: 0                 ResvTear Rx: 0              
    Notify Tx  : 0                 Notify Rx  : 5              
    Srfresh Tx : 1946              Srefresh Rx: 1933           
    Ack Tx     : 2157              Ack Rx     : 2170           
-----------------------------------------------------------------------------------
Total Peer Count: 1
 
port
Syntax
port [session-name] [sender ip-address] [detail]
Context
tools>dump>router>gmpls
Description
This command dumps information about a port.
Parameters
session-name
The name of the session. 80 characters max; accepts * as a wildcard character.
sender ip-address
The IP address of the sender, in dotted decimal notation.
Values
detail
Keyword to output information in greater detail.
Sample Output
*A:Dut-B-UNI-C>tools>dump>router>gmpls# port sender
sender <ip-address>
52.52.52.52  42.42.42.42  62.62.62.62  72.72.72.72
 
*A:Dut-B-UNI-C>tools>dump>router>gmpls# port sender 42.42.42.42
----------------------------------------------------------------------------------
LspPort "vrId: 1  Type: 0 Session: A1::5 Sender: 0.0.0.0"
   TunnelGrpId: 5  MemberId: 5  Mode:LoadSharing
   cfgFarEnd: 42.42.42.42 Flags: 0x0  NumUpdSent: 7  NumSrlgChng: 0
      PSB: vrId: 1 Session (To: 42.42.42.42 - 3 - 52.52.52.52), Sender (52.52.52.52 - 299)
      SRLG Collected :-
        SRLG 27
        SRLG List: Num 2 -->
        4         5      
        SRLG 27
----------------------------------------------------------------------------------
----------------------------------------------------------------------------------
LspPort "vrId: 1  Type: 0 Session: B1::1 Sender: 42.42.42.42"
   TunnelGrpId: 1  MemberId: 1  Mode:LoadSharing
   cfgFarEnd: 42.42.42.42 Flags: 0x0  NumUpdSent: 24  NumSrlgChng: 0
      PSB: vrId: 1 Session (To: 52.52.52.52 - 1 - 42.42.42.42), Sender (42.42.42.42 - 46)
----------------------------------------------------------------------------------
----------------------------------------------------------------------------------
LspPort "vrId: 1  Type: 0 Session: B1::4 Sender: 72.72.72.72"
   TunnelGrpId: 4  MemberId: 4  Mode:LoadSharing
   cfgFarEnd: 72.72.72.72 Flags: 0x0  NumUpdSent: 20  NumSrlgChng: 0
      PSB: vrId: 1 Session (To: 52.52.52.52 - 3 - 72.72.72.72), Sender (72.72.72.72 - 286)
----------------------------------------------------------------------------------
----------------------------------------------------------------------------------
LspPort "vrId: 1  Type: 0 Session: B1::6 Sender: 62.62.62.62"
   TunnelGrpId: 6  MemberId: 6  Mode:LoadSharing
   cfgFarEnd: 62.62.62.62 Flags: 0x0  NumUpdSent: 15  NumSrlgChng: 0
      PSB: vrId: 1 Session (To: 52.52.52.52 - 3 - 62.62.62.62), Sender (62.62.62.62 - 871)
----------------------------------------------------------------------------------
----------------------------------------------------------------------------------
LspPort "vrId: 1  Type: 0 Session: C1::3 Sender: 0.0.0.0"
   TunnelGrpId: 3  MemberId: 1  Mode:LoadSharing
   cfgFarEnd: 62.62.62.62 Flags: 0x0  NumUpdSent: 12  NumSrlgChng: 3
      PSB: vrId: 1 Session (To: 62.62.62.62 - 2 - 52.52.52.52), Sender (52.52.52.52 - 297)
      SRLG Collected :-
        SRLG 27
        SRLG 5
        SRLG 27
----------------------------------------------------------------------------------
----------------------------------------------------------------------------------
LspPort "vrId: 1  Type: 0 Session: D1::2 Sender: 0.0.0.0"
   TunnelGrpId: 2  MemberId: 2  Mode:LoadSharing
   cfgFarEnd: 72.72.72.72 Flags: 0x0  NumUpdSent: 10  NumSrlgChng: 0
      PSB: vrId: 1 Session (To: 72.72.72.72 - 1 - 52.52.52.52), Sender (52.52.52.52 - 296)
      SRLG Collected :-
        SRLG 27
        SRLG 4
        SRLG 27
----------------------------------------------------------------------------------
Total Port Count: 6
 
*A:Dut-B-UNI-C>tools>dump>router>gmpls# port sender 42.42.42.42
<session-name>
"A1::5"  "B1::1"  "B1::6"  "B1::4"  "C1::3"  "D1::2"
detail
 
*A:Dut-B-UNI-C>tools>dump>router>gmpls# port sender 42.42.42.42 detail
----------------------------------------------------------------------------------
LspPort "vrId: 1  Type: 0 Session: A1::5 Sender: 0.0.0.0"
   TunnelGrpId: 5  MemberId: 5  Mode:LoadSharing
   cfgFarEnd: 42.42.42.42 Flags: 0x0  NumUpdSent: 7  NumSrlgChng: 0
      PSB: vrId: 1 Session (To: 42.42.42.42 - 3 - 52.52.52.52), Sender (52.52.52.52 - 299)
      SRLG Collected :-
        SRLG 27
        SRLG List: Num 2 -->
        4         5      
        SRLG 27
----------------------------------------------------------------------------------
----------------------------------------------------------------------------------
LspPort "vrId: 1  Type: 0 Session: B1::1 Sender: 42.42.42.42"
   TunnelGrpId: 1  MemberId: 1  Mode:LoadSharing
   cfgFarEnd: 42.42.42.42 Flags: 0x0  NumUpdSent: 24  NumSrlgChng: 0
      PSB: vrId: 1 Session (To: 52.52.52.52 - 1 - 42.42.42.42), Sender (42.42.42.42 - 46)
----------------------------------------------------------------------------------
----------------------------------------------------------------------------------
LspPort "vrId: 1  Type: 0 Session: B1::4 Sender: 72.72.72.72"
   TunnelGrpId: 4  MemberId: 4  Mode:LoadSharing
   cfgFarEnd: 72.72.72.72 Flags: 0x0  NumUpdSent: 20  NumSrlgChng: 0
      PSB: vrId: 1 Session (To: 52.52.52.52 - 3 - 72.72.72.72), Sender (72.72.72.72 - 286)
----------------------------------------------------------------------------------
----------------------------------------------------------------------------------
LspPort "vrId: 1  Type: 0 Session: B1::6 Sender: 62.62.62.62"
   TunnelGrpId: 6  MemberId: 6  Mode:LoadSharing
   cfgFarEnd: 62.62.62.62 Flags: 0x0  NumUpdSent: 15  NumSrlgChng: 0
      PSB: vrId: 1 Session (To: 52.52.52.52 - 3 - 62.62.62.62), Sender (62.62.62.62 - 871)
----------------------------------------------------------------------------------
----------------------------------------------------------------------------------
LspPort "vrId: 1  Type: 0 Session: C1::3 Sender: 0.0.0.0"
   TunnelGrpId: 3  MemberId: 1  Mode:LoadSharing
   cfgFarEnd: 62.62.62.62 Flags: 0x0  NumUpdSent: 12  NumSrlgChng: 3
      PSB: vrId: 1 Session (To: 62.62.62.62 - 2 - 52.52.52.52), Sender (52.52.52.52 - 297)
      SRLG Collected :-
        SRLG 27
        SRLG 5
        SRLG 27
----------------------------------------------------------------------------------
----------------------------------------------------------------------------------
LspPort "vrId: 1  Type: 0 Session: D1::2 Sender: 0.0.0.0"
   TunnelGrpId: 2  MemberId: 2  Mode:LoadSharing
   cfgFarEnd: 72.72.72.72 Flags: 0x0  NumUpdSent: 10  NumSrlgChng: 0
      PSB: vrId: 1 Session (To: 72.72.72.72 - 1 - 52.52.52.52), Sender (52.52.52.52 - 296)
      SRLG Collected :-
        SRLG 27
        SRLG 4
        SRLG 27
----------------------------------------------------------------------------------
Total Port Count: 6
 
psb
Syntax
psb [tunnelid tunnel-id] [lspid lsp-id] [detail]
Context
tools>dump>router>gmpls
Description
This command dumps information about a PSB.
Parameters
tunnel-id
The identifier of the tunnel.
Values
lsp-id
The identifier of the LSP.
Values
detail
Keyword to output information in greater detail.
Sample Output
*A:Dut-B-UNI-C>tools>dump>router>gmpls# psb
PSB:
 vrId: 1 Session (To: 42.42.42.42 - 3 - 52.52.52.52), Sender (52.52.52.52 - 299)
--------------------------------------------------------------------------------
PSB:
 vrId: 1 Session (To: 52.52.52.52 - 1 - 42.42.42.42), Sender (42.42.42.42 - 46)
--------------------------------------------------------------------------------
PSB:
 vrId: 1 Session (To: 52.52.52.52 - 3 - 62.62.62.62), Sender (62.62.62.62 - 871)
--------------------------------------------------------------------------------
PSB:
 vrId: 1 Session (To: 52.52.52.52 - 3 - 72.72.72.72), Sender (72.72.72.72 - 286)
--------------------------------------------------------------------------------
PSB:
 vrId: 1 Session (To: 62.62.62.62 - 2 - 52.52.52.52), Sender (52.52.52.52 - 297)
--------------------------------------------------------------------------------
PSB:
 vrId: 1 Session (To: 72.72.72.72 - 1 - 52.52.52.52), Sender (52.52.52.52 - 296)
--------------------------------------------------------------------------------
Total PSB Count: 6
 
*A:Dut-B-UNI-C>tools>dump>router>gmpls# psb tunnelid 1 detail
--------------------------------------------------------------------------------
PSB:
 vrId: 1 Session (To: 52.52.52.52 - 1 - 42.42.42.42), Sender (42.42.42.42 - 46)
 
PSB CurrState: GMPLS_PSB_UP  PrevState: GMPLS_PSB_UP  Flags: 0x0
isIngress: N   isTransit: N   isEgress: Y
DnStream Peer: None
UpStream Peer: vrId 1 PeerAddr 10.27.255.213
UpStream TELink: vrId 1 TELinkId 1010701,  dBLink: vrId 1 DBLinkId 101070117
   RemoteDBLinkId: 101070117, PortId: 0x2268000, refCnt: 1, State: UP
 
Sender Template   - Sender: 42.42.42.42,  LspId: 46
Session Attribute -
   Session Name: B1::1
   Ctype: 7,  HoldPri: 1,  SetupPri: 5,  Flags: 0x2
   IncludeGroup: 0x0,  IncludeAllGroup: 0x0,  ExcludeGroup: 0x0
Lsp Attribute - TLV: 1,  Flags: 0x80000
NextPathRefresh: 0secs,  PathRefreshTimeout: 151secs
Path RX Message Id: 2209,  Epoch: 13810201,  Flags: 0x1
 
PSB RRO : ->
  (1) Unnumbered RouterId 10.27.255.213, InterfaceId 1010701, Flags 0x0
  (2) SRLG 27
  (3) Label 101070117,  Flags 0x0
  (4) Unnumbered RouterId 10.27.255.213, InterfaceId 13004, Flags 0x0
  (5) Label 101070130,  Flags 0x80
  (6) Unnumbered RouterId 10.27.255.215, InterfaceId 13007, Flags 0x0
  (7) SRLG 6
  (8) Label 101070130,  Flags 0x0
  (9) Unnumbered RouterId 10.27.255.215, InterfaceId 1010701, Flags 0x0
  (10) SRLG 27
  (11) Label 101070117,  Flags 0x80
  (12) Unnumbered RouterId 42.42.42.42, InterfaceId 1010701, Flags 0x0
  (13) Label 101070117,  Flags 0x0
 
PSB ERO : ->
  (1) IPv4Prefix 52.52.52.52/32, Strict [1]
 
PSB XRO : ->
   NULL XRO
PROTECTION - Flags: 0x0,  E2EProtectionType: 0
 
              LinkFlags: 0x0, SegProtFlags: 0x0, SegProtType: 0x1
ASSOCIATION - Type: 0,  AssociationId: 46,  Source: 42.42.42.42
NOTIFY REQ  - Node: 10.27.255.213
 
RSB:
NextResvRefresh: 9secs,  ResvRefreshTimeout: 0secs
Resv TX Message Id: 2661,  Flags: 0x0
PROTECTION - Flags: 0x0,  E2EProtectionType: 0
              LinkFlags: 0x0, SegProtFlags: 0x0, SegProtType: 0x1
 
FLOWSPEC : ->
   Ctype: 6 SwitchingGranularity: 1,  MTU: 9212,  TlvFlags: 0x1
   EthBWProfileTlv - Profile: 0,  Index: 0
                     CIR: 10.000 Gbps,  CBS: 10.000 Gbps
                     EIR: infinity,  EBS: infinity
  FILTERSPEC Label : 0
  FILTERSPEC RRO : ->
  (1) Unnumbered RouterId 52.52.52.52, InterfaceId 1010701, Flags 0x0
  (2) Label 101070117,  Flags 0x80
 
NOTIFY REQ - Node: 52.52.52.52
 
Bound to LSPPORT: vrId: 1  Type: 0 Session: B1::1 Sender: 42.42.42.42
 
Num Paths Received       :78
Num Paths Transmitted    :0
Num Resvs Received       :0
Num Resvs Transmitted    :1
 
Num Summmary Paths Received   :737
Num Summmary Paths Transmitted:0
Num Summmary Resvs Received   :0
Num Summmary Resvs Transmitted:750
Created at 37048 (21983 secs back)
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
PSB:
 vrId: 1 Session (To: 72.72.72.72 - 1 - 52.52.52.52), Sender (52.52.52.52 - 296)
 
PSB CurrState: GMPLS_PSB_UP  PrevState: GMPLS_PSB_UP  Flags: 0x0
isIngress: Y   isTransit: N   isEgress: N
DnStream Peer: vrId 1 PeerAddr 10.27.255.213
UpStream Peer: None
DnStream TELink: vrId 1 TELinkId 1010702,  dBLink: vrId 1 DBLinkId 101070217
   RemoteDBLinkId: 101070217, PortId: 0x2270000, refCnt: 1, State: UP
 
Sender Template   - Sender: 52.52.52.52,  LspId: 296
Session Attribute -
   Session Name: D1::2
   Ctype: 7,  HoldPri: 1,  SetupPri: 5,  Flags: 0x2
   IncludeGroup: 0x0,  IncludeAllGroup: 0x0,  ExcludeGroup: 0x0
Lsp Attribute - TLV: 1,  Flags: 0x80000
NextPathRefresh: 3secs,  PathRefreshTimeout: 0secs
Path TX Message Id: 471,  Flags: 0x0
 
PSB RRO : ->
  (1) Unnumbered RouterId 52.52.52.52, InterfaceId 1010702, Flags 0x0
  (2) Label 101070217,  Flags 0x0
 
PSB ERO : ->
  (1) Unnumbered RouterId 52.52.52.52, LinkId 1010702, Loose [1]
  (2) IPv4Prefix 10.27.255.213/32, Strict [0]
  (3) Unnumbered RouterId 10.27.255.219, LinkId 1010702, Strict [0]
  (4) IPv4Prefix 72.72.72.72/32, Loose [0]
 
PSB XRO : ->
   NULL XRO
PROTECTION - Flags: 0x0,  E2EProtectionType: 1
              LinkFlags: 0x0, SegProtFlags: 0x0, SegProtType: 0x0
ASSOCIATION - Type: 0,  AssociationId: 296,  Source: 52.52.52.52
NOTIFY REQ  - Node: 52.52.52.52
 
RSB:
NextResvRefresh: 0secs,  ResvRefreshTimeout: 151secs
Resv RX Message Id: 19,  Epoch: 13810201,  Flags: 0x1
PROTECTION - Flags: 0x0,  E2EProtectionType: 1
              LinkFlags: 0x0, SegProtFlags: 0x0, SegProtType: 0x0
 
FLOWSPEC : ->
   Ctype: 6 SwitchingGranularity: 1,  MTU: 9212,  TlvFlags: 0x1
   EthBWProfileTlv - Profile: 0,  Index: 0
                     CIR: 10.000 Gbps,  CBS: 10.000 Gbps
                     EIR: infinity,  EBS: infinity
  FILTERSPEC Label : 101070217
  FILTERSPEC RRO : ->
  (1) Unnumbered RouterId 52.52.52.52, InterfaceId 1010702, Flags 0x0
  (2) Label 101070217,  Flags 0x0
  (3) Unnumbered RouterId 10.27.255.213, InterfaceId 1010702, Flags 0x0
  (4) SRLG 27
  (5) Label 101070217,  Flags 0x80
  (6) Unnumbered RouterId 10.27.255.213, InterfaceId 13000, Flags 0x0
  (7) SRLG 4
  (8) Label 101070230,  Flags 0x0
  (9) Unnumbered RouterId 10.27.255.219, InterfaceId 13001, Flags 0x0
  (10) Label 101070230,  Flags 0x80
  (11) Unnumbered RouterId 10.27.255.219, InterfaceId 1010702, Flags 0x0
  (12) SRLG 27
  (13) Label 101070217,  Flags 0x0
  (14) Unnumbered RouterId 72.72.72.72, InterfaceId 1010702, Flags 0x0
  (15) Label 101070217,  Flags 0x80
 
NOTIFY REQ - Node: 10.27.255.213
 
Bound to LSPPORT: vrId: 1  Type: 0 Session: D1::2 Sender: 0.0.0.0
 
Num Paths Received       :0
Num Paths Transmitted    :1         
 Num Resvs Received       :23
Num Resvs Transmitted    :0
 
Num Summmary Paths Received   :0
Num Summmary Paths Transmitted:1834
Num Summmary Resvs Received   :1824
Num Summmary Resvs Transmitted:0
Created at 4439 (54592 secs back)
--------------------------------------------------------------------------------
Total PSB Count: 2
 
status
Syntax
status
Context
tools>dump>router>gmpls
Description
This command dumps general GMPLS status information.
Sample Output
*A:Dut-B-UNI-C>tools>dump>router>gmpls# status
-------------------------------------------------------------------------------
  GMPLS instance vrId: 1
  AdminState: UP,  OperState:UP, OperDownReason: N/A
  Flags: 0x0,  localNodeId: 52.52.52.52
  InitRetryTimeout: 30    KeepMultiplier: 3     RefreshTime: 30
  RapidRetransmitTime: 5    RapidRetryLimit: 3  
  GrRestartTime: 180   GrRecoveryTime: 300
 
  gLspWPOriginate: 3    gLspWPTransit: 0    gLspWPTerminate: 3  
  gLspPPOriginate: 0    gLspPPTransit: 0    gLspPPTerminate: 0  
  NumTELink: 6     NumDB: 6     NumLspPort: 6     NumTunGrp: 6  
  Num gLsp: 3     Num gLspPath: 3     Num Path: 4  
  NumLspPortAudited: 0     NumStaleLspPortDeleted: 0  
-------------------------------------------------------------------------------
 
 
te-link
Syntax
te-link [te-link-id] [detail]
Context
tools>dump>router>gmpls
Description
This command dumps information about TE links. Configuring the te-link-id parameter will only dump information about the specified TE link.
Parameters
te-link-id
The identifier of the TE link.
Values
detail
Keyword to output information in greater detail.
Sample Output
*A:Dut-B-UNI-C>tools>dump>router>gmpls# te-link
<te-link-id>
1010701  1010702  1010703  1010704  1010705  1010706
detail
 
*A:Dut-B-UNI-C>tools>dump>router>gmpls# te-link 1010701
 
TE-LINK    "vrId 1 TELinkId 1010701"
  AdminState: UP,  OperState:UP
  LastChange: 02/04/2015 23:30:34
  Peer: 10.27.255.213   RemoteTELinkId: 1010701   NumDbLink: 1
-------------------------------------------------------------------------------
Total TE-Link Count: 1
 
*A:Dut-B-UNI-C>tools>dump>router>gmpls# te-link 1010701 detail
 
TE-LINK    "vrId 1 TELinkId 1010701"
  AdminState: UP,  OperState:UP
  LastChange: 02/04/2015 23:30:34
  Peer: 10.27.255.213   RemoteTELinkId: 1010701   NumDbLink: 1
-------------------------------------------------------------------------------
Total TE-Link Count: 1