For feedback and comments:
documentation.feedback@alcatel-lucent.com

Table of Contents Previous Next PDF


IES Show Commands
IES
customer
Syntax
customer [customer-id] [site customer-site-name]
Context
show>service
Description
This command displays service customer information.
Parameters
customer-id
Displays only information for the specified customer ID.
Default
Values
site customer-site-name
Specifies the customer site which is an anchor point for an ingress and egress virtual scheduler hierarchy.
Output
Show Customer Command Output
The following table describes show customer command output fields:
Sample Output
*A:ALA-12# show service customer
==========================================================
Customers
==========================================================
Customer-ID : 1
Contact     : Manager
Description : Default customer
Phone       : (123) 555-1212
 
Customer-ID : 2
Contact     : Tech Support
Description : TiMetra Networks
Phone       : (234) 555-1212
 
Customer-ID : 3
Contact     : Fred
Description : TiMetra Networks
Phone       : (345) 555-1212
 
Customer-ID : 6
Contact     : Ethel
Description : Epipe Customer
Phone       : (456) 555-1212
 
Customer-ID : 7
Contact     : Lucy
Description : ABC Customer
Phone       : (567) 555-1212
 
Customer-ID : 8
Contact     : Customer Service
Description : IES Customer
Phone       : (678) 555-1212
 
Customer-ID : 274
Contact     : Mssrs. Beaucoup
Description : ABC Company
Phone       : 650 123-4567
 
Customer-ID : 94043
Contact     : Test Engineer on Duty
Description : TEST Customer
Phone       : (789) 555-1212
 
------------------------------------------------------
Total Customers : 8
-----------------------------------------------------------
*A:ALA-12#
 
 
*A:ALA-12# show service customer 274
==============================================================================
Customer  274
==============================================================================
Customer-ID : 274
Contact     : Mssrs. Beaucoup
Description : ABC Company
Phone       : 650 123-4567
------------------------------------------------------------------------------
Multi Service Site
------------------------------------------------------------------------------
Site        : west
Description : (Not Specified)
==============================================================================
*A:ALA-12#
 
 
*A:ALA-12# show service customer 274 site west
==============================================================================
Customer  274
==============================================================================
Customer-ID : 274
Contact     : Mssrs. Beaucoup
Description : ABC Company
Phone       : 650 123-4567
------------------------------------------------------------------------------
Multi Service Site
------------------------------------------------------------------------------
Site        : west
Description : (Not Specified)
Assignment  : Card 5
I. Sched Pol: SLA1
E. Sched Pol: (Not Specified)
------------------------------------------------------------------------------
Service Association
------------------------------------------------------------------------------
No Service Association Found.
==============================================================================
*A:ALA-12#
egress-label
Syntax
egress-label egress-label1 [egress-label2]
Context
show>service
Description
Display services using the range of egress labels.
If only the mandatory egress-label1 parameter is specified, only services using the specified label are displayed.
If both egress-label1 and egress-label2 parameters are specified, the services using the range of labels X where egress-label1 <= X <= egress-label2 are displayed.
Use the show router ldp bindings command to display dynamic labels.
Parameters
egress-label1
The starting egress label value for which to display services using the label range. If only egress-label1 is specified, services only using egress-label1 are displayed.
Values
egress-label2
The ending egress label value for which to display services using the label range.
Default
The egress-label1 value.
Values
Output
Show Service Egress Command Output
The following table describes show service egress label output fields.
Sample Output
*A:ALA-12# show service egress-label 0 10000
==============================================================================
Martini Service Labels                                                         
==============================================================================
Svc Id     Sdp Id             Type I.Lbl        E.Lbl                          
------------------------------------------------------------------------------
1          10:1               Mesh 0            0                              
1          20:1               Mesh 0            0                              
1          30:1               Mesh 0            0                              
1          100:1              Mesh 0            0                              
...
1          107:1              Mesh 0            0                              
1          108:1              Mesh 0            0                              
1          300:1              Mesh 0            0                              
1          301:1              Mesh 0            0                              
1          302:1              Mesh 0            0                              
1          400:1              Mesh 0            0                              
100        300:100            Spok 0            0                              
200        301:200            Spok 0            0                              
300        302:300            Spok 0            0                              
400        400:400            Spok 0            0                              
------------------------------------------------------------------------------
Number of Bindings Found : 21
==============================================================================
*A:ALA-12#
ingress-label
Syntax
ingress-label start-label [end-label]
Context
show>service
Description
This command displays services using the range of ingress labels. If only the mandatory start-label parameter is specified, only services using the specified label are displayed.
If both start-label and end-label parameters are specified, the services using the range of labels X where start-label <= X <= end-label are displayed.
Use the show router vprn-service-id ldp bindings command to display dynamic labels.
Parameters
start-label
The starting ingress label value for which to display services using the label range. If only start-label is specified, services only using start-label are displayed.
Values
end-label
The ending ingress label value for which to display services using the label range.
Default
The start-label value.
Values
Output
Show Service Ingress-Label
The following table describes show service ingress-label output fields:
Sample Output
*A:ALA-12# show service ingress-label 0
==============================================================================
Martini Service Labels                                                         
==============================================================================
Svc Id     Sdp Id             Type I.Lbl        E.Lbl                          
------------------------------------------------------------------------------
1          10:1               Mesh 0            0                              
1          20:1               Mesh 0            0                              
1          30:1               Mesh 0            0                              
1          50:1               Mesh 0            0                              
1          100:1              Mesh 0            0                              
1          101:1              Mesh 0            0                              
1          102:1              Mesh 0            0                              
1          103:1              Mesh 0            0                              
1          104:1              Mesh 0            0                              
1          105:1              Mesh 0            0                              
1          106:1              Mesh 0            0                              
1          107:1              Mesh 0            0                              
1          108:1              Mesh 0            0                              
1          300:1              Mesh 0            0                              
1          301:1              Mesh 0            0                              
1          302:1              Mesh 0            0                              
1          400:1              Mesh 0            0                              
1          500:2              Spok 131070       2001                           
1          501:1              Mesh 131069       2000                           
100        300:100            Spok 0            0                              
200        301:200            Spok 0            0                              
300        302:300            Spok 0            0                              
400        400:400            Spok 0            0                              
------------------------------------------------------------------------------
Number of Bindings Found : 23                                                  
------------------------------------------------------------------------------
*A:ALA-12# 
sap-using
Syntax
sap-using [msap] [dyn-script] [description]
sap-using [sap sap-id] [vlan-translation | anti-spoof] [description]
sap-using [sap sap-id]
sap-using interface [ip-address | ip-int-name]
sap-using [ingress | egress] atm-td-profile td-profile-id
sap-using [ingress | egress] filter filter-id
sap-using [ingress | egress] qos-policy qos-policy-id
sap-using authentication-policy policy-name
Context
show>service
Description
Displays SAP information.
If no optional parameters are specified, the command displays a summary of all defined SAPs. The optional parameters restrict output to only SAPs matching the specified properties.
Parameters
sap sap-id
Specifies the physical port identifier portion of the SAP definition. See Common CLI Command Descriptions for command syntax.
ingress
Specifies matching an ingress policy.
egress
Specifies matching an egress policy.
qos-policy qos-policy-id
The ingress or egress QoS Policy ID for which to display matching SAPs.
Values
atm-td-profile td-profile-id
Displays SAPs using this traffic description.
filter filter-id
The ingress or egress filter policy ID for which to display matching SAPs.
Values
dyn-script
Displays dynamic service SAPs information.
authentication policy-name
The session authentication policy for which to display matching SAPs.
interface
Specifies matching SAPs with the specified IP interface.
ip-addr
The IP address of the interface for which to display matching SAPs.
Values
ip-int-name
The IP interface name for which to display matching SAPs.
Output
Show Service SAP
The following table describes show service SAP output fields:
Sample Output
*A:ALA-48# show service sap-using sap 2/1/10:0
===============================================================================
Service Access Points Using Port 2/1/10:0
===============================================================================
PortId                          SvcId      Ing.  Ing.    Egr.  Egr.   Adm  Opr
                                           QoS   Fltr    QoS   Fltr
-------------------------------------------------------------------------------
2/1/10:0                        13         1     none    1     none   Up   Down
-------------------------------------------------------------------------------
Number of SAPs : 1
-------------------------------------------------------------------------------
===============================================================================
*A:ALA-48#
*A:ALA-12#  show service sap-using egress atm-td-profile 2 
===============================================================================
Service Access Point Using ATM Traffic Profile 2
===============================================================================
PortId SvcId I.QoS I.Fltr E.QoS E.Fltr A.Pol Adm Opr
-------------------------------------------------------------------------------
5/1/1:0/11 511111 2 none 2 none none Up Up
5/1/1:0/12 511112 2 none 2 none none Up Up
5/1/1:0/13 511113 2 none 2 none none Up Up
5/1/1:0/14 511114 2 none 2 none none Up Up
5/1/1:0/15 511115 2 none 2 none none Up Up
5/1/1:0/16 511116 2 none 2 none none Up Up
5/1/1:0/17 511117 2 none 2 none none Up Up
5/1/1:0/18 511118 2 none 2 none none Up Up
5/1/1:0/19 511119 2 none 2 none none Up Up
5/1/1:0/20 511120 2 none 2 none none Up Up
5/1/1:0/21 511121 2 none 2 none none Up Up
5/1/1:0/22 511122 2 none 2 none none Up Up
5/1/1:0/23 511123 2 none 2 none none Up Up
5/1/1:0/24 511124 2 none 2 none none Up Up
5/1/1:0/25 511125 2 none 2 none none Up Up
...
=============================================================================== 
*A:ALA-12# 
sdp
Syntax
sdp [sdp-id | far-end ip-address] [detail | keep-alive-history]
Context
show>service
Description
This command displays SDP information. If no optional parameters are specified, a summary SDP output for all SDPs is displayed.
Parameters
sdp-id
Specifies the SDP ID for which to display information.
Default
Values
far-end ip-address
Displays only SDPs matching with the specified far-end IP address.
Default
detail
Displays detailed SDP information.
Default
keep-alive-history
Displays the last fifty SDP keepalive events for the SDP.
Default
Output
Show Service SDP
The following table describes show service SDP output fields:
Sample Output
*A:ALA-12# show service sdp
==============================================================================
Services: Service Destination Points                                           
==============================================================================
SdpId    Adm MTU   Opr MTU   IP address       Adm  Opr         Deliver Signal  
------------------------------------------------------------------------------
10       4462      4462      10.20.1.3        Up   Dn NotReady MPLS    TLDP    
40       4462      1534      10.20.1.20       Up   Up          MPLS    TLDP    
60       4462      1514      10.20.1.21       Up   Up          GRE     TLDP    
100      4462      4462      180.0.0.2        Down Down        GRE     TLDP    
500      4462      4462      10.20.1.50       Up   Dn NotReady GRE     TLDP    
------------------------------------------------------------------------------
Number of SDPs : 5                                                            
------------------------------------------------------------------------------
*A:ALA-12# 
 
 
*A:ALA-12# show service sdp 2 detail
===============================================================================
Service Destination Point (Sdp Id : 2) Details
-------------------------------------------------------------------------------
 Sdp Id 2  -(10.10.10.104)
-------------------------------------------------------------------------------
Description           : GRE-10.10.10.104
SDP Id               : 2
Admin Path MTU       : 0                     Oper Path MTU      : 0
Far End              : 10.10.10.104          Delivery           : GRE
Admin State          : Up                    Oper State         : Down
Flags                : SignalingSessDown TransportTunnDown
Signaling            : TLDP                  VLAN VC Etype      : 0x8100
Last Status Change   : 02/01/2007 09:11:39   Adv. MTU Over.     : No
Last Mgmt Change     : 02/01/2007 09:11:46
 
KeepAlive Information :
Admin State          : Disabled              Oper State         : Disabled
Hello Time           : 10                    Hello Msg Len      : 0
Hello Timeout        : 5                     Unmatched Replies  : 0
Max Drop Count       : 3                     Hold Down Time     : 10
Tx Hello Msgs        : 0                     Rx Hello Msgs      : 0
 
Associated LSP LIST :
SDP Delivery Mechanism is not MPLS
===============================================================================
*A:ALA-12# 
 
 
*A:ALA-12# show service sdp 8
==============================================================================
Service Destination Point (Sdp Id : 8)
==============================================================================
SdpId    Adm MTU   Opr MTU   IP address       Adm  Opr         Deliver Signal
------------------------------------------------------------------------------
8        4462      4462      10.10.10.104     Up   Dn NotReady MPLS    TLDP
==============================================================================
*A:ALA-12# 
===============================================================================
Service Destination Point (Sdp Id : 8) Details
===============================================================================
Sdp Id 8  -(10.10.10.104)
-------------------------------------------------------------------------------
Description           : MPLS-10.10.10.104
SDP Id               : 8
Admin Path MTU       : 0                     Oper Path MTU      : 0
Far End              : 10.10.10.104          Delivery           : MPLS
Admin State          : Up                    Oper State         : Down
Flags                : SignalingSessDown TransportTunnDown
Signaling            : TLDP                  VLAN VC Etype      : 0x8100
Last Status Change   : 02/01/2007 09:11:39   Adv. MTU Over.     : No
Last Mgmt Change     : 02/01/2007 09:11:46
KeepAlive Information :
Admin State          : Disabled              Oper State         : Disabled
Hello Time           : 10                    Hello Msg Len      : 0
Hello Timeout        : 5                     Unmatched Replies  : 0
Max Drop Count       : 3                     Hold Down Time     : 10
Tx Hello Msgs        : 0                     Rx Hello Msgs      : 0
 
Associated LSP LIST :
Lsp Name             : to-104
Admin State          : Up                    Oper State         : Down
Time Since Last Tran*: 01d07h36m
===============================================================================
* indicates that the corresponding row element may have been truncated.
*A:ALA-12#
 
When network domains are configured, the SDP egress interface state can be verified by using the following command:
*A:Dut-T# show service sdp egressifs 
===============================================================================
SDP Egress Ifs State Table
===============================================================================
SDP Id              Network Domain                   State                     
-------------------------------------------------------------------------------
100                 net1                             consistent                
-------------------------------------------------------------------------------
SDPs : 1
===============================================================================
*A:Dut-Tr# 
sdp-using
Syntax
sdp-using [sdp-id[:vc-id] | far-end ip-address]
Context
show>service
Description
This command displays services using SDP or far-end address options.
Parameters
sdp-id
Displays only services bound to the specified SDP ID.
Values
vc-id
Displays information about the virtual circuit identifier.
Values
far-end ip-address
Displays only services matching with the specified far-end IP address.
Default
Output
Show Service SDP Using X
The following table describes show service sdp-using output fields.
Sample Output
*A:ALA-1# show service sdp-using 300
===============================================================================
Service Destination Point (Sdp Id : 300)
===============================================================================
SvcId       SdpId               Type Far End        Opr State I.Label  E.Label
-------------------------------------------------------------------------------
1           300:1               Mesh 10.0.0.13      Up        131071   131071
2           300:2               Spok 10.0.0.13      Up        131070   131070
100         300:100             Mesh 10.0.0.13      Up        131069   131069
101         300:101             Mesh 10.0.0.13      Up        131068   131068
102         300:102             Mesh 10.0.0.13      Up        131067   131067
-------------------------------------------------------------------------------
Number of SDPs : 5
===============================================================================
*A:ALA-1#
service-using
Syntax
service-using [ies] [customer customer-id]
Context
show>service
Description
This command displays the services matching certain usage properties. If no optional parameters are specified, all services defined on the system are displayed.
Parameters
ies
Displays matching IES services.
sdp sdp-id
Displays only services bound to the specified SDP ID.
Default
Values
customer customer-id
Displays services only associated with the specified customer ID.
Default
Values
Output
Show Service Service-Using
The following table describes show service service-using output fields:
Sample Output
A:ALA-48# show service service-using ies
===============================================================================
Services [ies]
===============================================================================
ServiceId    Type      Adm    Opr        CustomerId        Last Mgmt Change
-------------------------------------------------------------------------------
88           IES       Up     Down       8                 07/25/2006 15:46:28
89           IES       Up     Down       8                 07/25/2006 15:46:28
104          IES       Up     Down       1                 07/25/2006 15:46:28
200          IES       Up     Down       1                 07/25/2006 15:46:28
214          IES       Up     Down       1                 07/25/2006 15:46:28
321          IES       Up     Down       1                 07/25/2006 15:46:28
322          IES       Down   Down       1                 07/25/2006 15:46:28
1001         IES       Up     Down       1730              07/25/2006 15:46:28
-------------------------------------------------------------------------------
Matching Services : 8
-------------------------------------------------------------------------------
A:ALA-48#
subscriber-using
Syntax
subscriber-using [service-id service-id] [sap-id sap-id] [interface ip-int-name] [ip ip-address[/mask]] [mac ieee-address] [sub-profile sub-profile-name] [sla-profile sla-profile-name]
Context
show>service>subscriber-using
Description
This command displays subscribers using certain options.
Parameters
service-id service-id
Display subscriber information about the specified service ID.
Values
sap-id sap-id
Specifies the physical port identifier portion of the SAP definition. See Common CLI Command Descriptions for command syntax.
interface ip-int-name
Display subscriber information about the specified interface.
ip ip-address[/mask
Display subscriber information about the specified IP address.
mac ieee-address
Display subscriber information about the specified MAC address.
sub-profile sub-profile-name
Display subscriber information about the specified subscriber profile name.
sla-profile sla-profile-name
Display subscriber information about the specified SLA profile name.
id
Syntax
id service-id {all | arp | base | sap | sdp}
Context
show>service
Description
This command displays information for a particular service-id.
Parameters
service-id
The unique service identification number to identify the service in the service domain.
all
Display detailed information about the service.
arp
Display ARP entries for the service.
arp-host
Displays ARP host related information.
base
Display basic service information.
interface
Display service interfaces.
sap
Display SAPs associated to the service.
sdp
Display SDPs associated with the service.
 
all
Syntax
all
Context
show>service>id
Description
This command displays detailed information for all aspects of the service.
Output
Show All Service-ID Output
The following table describes the show all service-id command output fields:
Sample Output
The following is a part of a sample output relevant to PW SAPs:
*A:Dut-B# show service id 3 all
...
-------------------------------------------------------------------------------
SAP pw-3:3
-------------------------------------------------------------------------------
Service Id         : 3
SAP                : pw-3:3                   Encap             : q-tag
Description        : (Not Specified)
Admin State        : Up                       Oper State        : Up
Flags              : None
Multi Svc Site     : None
Last Status Change : 02/03/2015 18:04:39
Last Mgmt Change   : 02/03/2015 18:04:13
Sub Type           : regular
Split Horizon Group: (Not Specified)
Admin MTU          : 1518                     Oper MTU          : 1518
Ingr IP Fltr-Id    : n/a                      Egr IP Fltr-Id    : n/a
Ingr Mac Fltr-Id   : n/a                      Egr Mac Fltr-Id   : n/a
Ingr IPv6 Fltr-Id  : n/a                      Egr IPv6 Fltr-Id  : n/a
tod-suite          : None                     qinq-pbit-marking : both
                                              Egr Agg Rate Limit: max
Endpoint           : N/A
                                              Limit Unused BW   : Disabled
Vlan-translation   : None
Acct. Pol          : None                     Collect Stats     : Disabled
Application Profile: None
Transit Policy     : None
Oper Group         : (none)                   Monitor Oper Grp  : (none)
Host Lockout Plcy  : n/a
Ignore Oper Down   : Disabled
Lag Link Map Prof  : (none)
Cflowd             : Disabled
 
-------------------------------------------------------------------------------
...
 
 
*A:Dut-B# show service id 1 all  
 
===============================================================================
Service Detailed Information
===============================================================================
Service Id        : 1                   Vpn Id            : 0
Service Type      : IES                 
Name              : (Not Specified)
Description       : (Not Specified)
Customer Id       : 1                   Creation Origin   : manual
Last Status Change: 01/28/2015 22:17:56 
Last Mgmt Change  : 01/28/2015 22:10:04 
Admin State       : Up                  Oper State        : Up
SAP Count         : 0                   SDP Bind Count    : 1
 
-------------------------------------------------------------------------------
ETH-CFM service specifics
-------------------------------------------------------------------------------
Tunnel Faults     : ignore              
 
 
-------------------------------------------------------------------------------
Service Destination Points(SDPs)
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
 Sdp Id 230:1  -(10.20.1.3)
-------------------------------------------------------------------------------
Description     : (Not Specified)
SDP Id             : 230:1                    Type              : Spoke
Spoke Descr     : (Not Specified)
VC Type            : Ether                    VC Tag            : n/a
Admin Path MTU     : 0                        Oper Path MTU     : 1582
Delivery           : MPLS                     
Far End            : 10.20.1.3
Tunnel Far End     : n/a                      LSP Types         : SR-ISIS
Hash Label         : Disabled                 Hash Lbl Sig Cap  : Disabled
Oper Hash Label    : Disabled                 
 
Admin State        : Up                       Oper State        : Up
Acct. Pol          : None                     Collect Stats     : Disabled
Ingress Label      : 262133                   Egress Label      : 262133
Ingr Mac Fltr-Id   : n/a                      Egr Mac Fltr-Id   : n/a
Ingr IP Fltr-Id    : n/a                      Egr IP Fltr-Id    : n/a
Ingr IPv6 Fltr-Id  : n/a                      Egr IPv6 Fltr-Id  : n/a
BGP IPv4 FlowSpec  : Disabled
BGP IPv6 FlowSpec  : Disabled
Admin ControlWord  : Not Preferred            Oper ControlWord  : False
BFD Template       : None
BFD-Enabled        : no                       BFD-Encap         : ipv4
Last Status Change : 01/28/2015 22:17:56      Signaling         : TLDP
Last Mgmt Change   : 01/28/2015 22:16:50      
Class Fwding State : Down                     
Flags              : None
Local Pw Bits      : None
Peer Pw Bits       : None
Peer Fault Ip      : None                     
Peer Vccv CV Bits  : lspPing bfdFaultDet
Peer Vccv CC Bits  : mplsRouterAlertLabel
 
Application Profile: None                     
Transit Policy     : None                     
AARP Id            : None                     
 
Ingress Qos Policy : (none)                   Egress Qos Policy : (none)
Ingress FP QGrp    : (none)                   Egress Port QGrp  : (none)
Ing FP QGrp Inst   : (none)                   Egr Port QGrp Inst: (none)
 
KeepAlive Information :
Admin State        : Disabled                 Oper State        : Disabled
Hello Time         : 10                       Hello Msg Len     : 0
Max Drop Count     : 3                        Hold Down Time    : 10
 
Statistics            :
I. Fwd. Pkts.      : 0                        I. Dro. Pkts.     : 0
I. Fwd. Octs.      : 0                        I. Dro. Octs.     : 0
E. Fwd. Pkts.      : 3                        E. Fwd. Octets    : 180
 
-------------------------------------------------------------------------------
Control Channel Status
-------------------------------------------------------------------------------
PW Status          : disabled                 Refresh Timer     : <none>
Peer Status Expire : false                    
Request Timer      : <none>                   
Acknowledgement    : false                    
 
-------------------------------------------------------------------------------
ETH-CFM SDP-Bind specifics
-------------------------------------------------------------------------------
Squelch Levels     : None                     
 
-------------------------------------------------------------------------------
RSVP/Static LSPs
-------------------------------------------------------------------------------
Associated LSP List :
No LSPs Associated
 
-------------------------------------------------------------------------------
Class-based forwarding :
-------------------------------------------------------------------------------
Class forwarding   : Disabled                 EnforceDSTELspFc  : Disabled
Default LSP        : Uknwn                    Multicast LSP     : None
 
===============================================================================
FC Mapping Table
===============================================================================
FC Name             LSP Name
-------------------------------------------------------------------------------
No FC Mappings
 
-------------------------------------------------------------------------------
Number of SDPs : 1
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Service Access Points
-------------------------------------------------------------------------------
No Sap Associations
 
-------------------------------------------------------------------------------
Service Interfaces
-------------------------------------------------------------------------------
                                      
-------------------------------------------------------------------------------
Interface
-------------------------------------------------------------------------------
If Name           : iesSpokeToC
Admin State       : Up                  Oper (v4/v6)      : Up/Down
Protocols         : None
IP Addr/mask      : 20.20.20.2/24       Address Type      : Primary
IGP Inhibit       : Disabled            Broadcast Address : Host-ones
HoldUp-Time       : 0                   Track Srrp Inst   : 0
Description       : N/A
-------------------------------------------------------------------------------
Details
-------------------------------------------------------------------------------
Description       : (Not Specified)
If Index          : 4                   Virt. If Index    : 4
Last Oper Chg     : 01/28/2015 22:17:56 Global If Index   : 257
Mon Oper Grp      : None                
Srrp En Rtng      : Disabled            Hold time         : N/A
SDP Id            : spoke-230:1
 
Spoke-SDP Details
Admin State       : Up                  Oper State        : Up
Hash Label        : Disabled            Hash Lbl Sig Cap  : Disabled
Oper Hash Label   : Disabled            
Peer Fault Ip     : None                
Local Pw Bits      : None
Peer Pw Bits       : None
Peer Vccv CV Bits  : lspPing bfdFaultDet
Peer Vccv CC Bits  : mplsRouterAlertLabel
Flags              : None
 
TOS Marking       : Untrusted           If Type           : IES
SNTP B.Cast       : False               IES ID            : 1
MAC Address       : 00:03:fa:32:16:62   Mac Accounting    : Disabled
Ingress stats     : Disabled            IPv6 DAD          : Enabled
TCP MSS V4        : 0                   TCP MSS V6        : 0
Arp Timeout       : 14400s              IPv6 Nbr ReachTime: 30s
Arp Retry Timer   : 5000ms              
IP Oper MTU       : 1500                ICMP Mask Reply   : True
Arp Populate      : Disabled            Host Conn Verify  : Disabled
Cflowd (unicast)  : None                Cflowd (multicast): None
LdpSyncTimer      : None                
LSR Load Balance  : system              
EGR Load Balance  : both                
TEID Load Balance : Disabled            
SPI Load Balance  : Disabled            
uRPF Chk          : disabled            
uRPF Ipv6 Chk     : disabled            
PTP HW Assist     : Disabled            
Rx Pkts           : 0                   Rx Bytes          : 0
Rx V4 Pkts        : N/A                 Rx V4 Bytes       : N/A
Rx V6 Pkts        : N/A                 Rx V6 Bytes       : N/A
Tx Pkts           : 3                   Tx Bytes          : 180
Tx V4 Pkts        : 0                   Tx V4 Bytes       : 0
Tx V4 Discard Pkts: 0                   Tx V4 Discard Byt*: 0
Tx V6 Pkts        : 0                   Tx V6 Bytes       : 0
Tx V6 Discard Pkts: 0                   Tx V6 Discard Byt*: 0
 
Proxy ARP Details
Rem Proxy ARP     : Disabled            Local Proxy ARP   : Disabled
Policies          : none                
 
Proxy Neighbor Discovery Details
Local Pxy ND      : Disabled            
Policies          : none                
 
DHCP no local server
 
DHCP Details
Description  : (Not Specified)
Admin State       : Down                Lease Populate    : 0
Gi-Addr           : 20.20.20.2*         Gi-Addr as Src Ip : Disabled 
* = inferred gi-address from interface IP address
 
Action            : Keep                Trusted           : Disabled
 
DHCP Proxy Details
Admin State       : Down                
Lease Time        : N/A                 
Emul. Server      : Not configured      
 
Subscriber Authentication Details
Auth Policy       : None                
 
DHCP6 Relay Details
Description       : (Not Specified)
Admin State       : Down                Lease Populate    : 0
Oper State        : Down                Nbr Resolution    : Disabled
If-Id Option      : None                Remote Id         : Disabled
Src Addr          : Not configured
Python plcy       : (Not Specified)     
 
DHCP6 Server Details
Admin State       : Down                Max. Lease States : 8000
 
ISA Tunnel redundant next-hop information
Static Next-Hop   :                     
Dynamic Next-Hop  :                     
 
ICMP Details
Redirects    : Number - 100                     Time (seconds)   - 10   
Unreachables : Number - 100                     Time (seconds)   - 10   
TTL Expired  : Number - 100                     Time (seconds)   - 10   
 
IPCP Address Extension Details
Peer IP Addr      : Not configured      
Peer Pri DNS Addr : Not configured      
Peer Sec DNS Addr : Not configured      
 
Network Domains Associated
default
 
-------------------------------------------------------------------------------
Admin Groups
-------------------------------------------------------------------------------
No Matching Entries
-------------------------------------------------------------------------------
 
-------------------------------------------------------------------------------
Srlg Groups                           
-------------------------------------------------------------------------------
No Matching Entries
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
QoS Queue-Group Redirection Details
-------------------------------------------------------------------------------
Ingress FP QGrp   : (none)              Egress Port QGrp  : (none)
Ing FP QGrp Inst  : (none)              Egr Port QGrp Inst: (none)
===============================================================================
* indicates that the corresponding row element may have been truncated.
*A:Dut-B#  
 
 
*B:Dut-C# show service id 1 all    
 
===============================================================================
Service Detailed Information
===============================================================================
Service Id        : 1                   Vpn Id            : 1
Service Type      : IES                 
Name              : XYZ Ies 1
Description       : default
Customer Id       : 1                   Creation Origin   : manual
Last Status Change: 05/27/2015 07:15:06 
Last Mgmt Change  : 05/27/2015 07:14:43 
Admin State       : Up                  Oper State        : Up
SAP Count         : 0                   SDP Bind Count    : 1
 
-------------------------------------------------------------------------------
ETH-CFM service specifics
-------------------------------------------------------------------------------
Tunnel Faults     : ignore              
 
 
-------------------------------------------------------------------------------
Service Destination Points(SDPs)
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
 Sdp Id 6:1  -(10.20.1.1)
-------------------------------------------------------------------------------
Description     : Default sdp description
SDP Id             : 6:1                      Type              : Spoke
Spoke Descr     : (Not Specified)
VC Type            : Ether                    VC Tag            : n/a
Admin Path MTU     : 1514                     Oper Path MTU     : 1514
Delivery           : MPLS                     
Far End            : 10.20.1.1
Tunnel Far End     : n/a                      LSP Types         : SR-OSPF
Hash Label         : Disabled                 Hash Lbl Sig Cap  : Disabled
Oper Hash Label    : Disabled                 
                                      
Admin State        : Up                       Oper State        : Up
Acct. Pol          : None                     Collect Stats     : Disabled
Ingress Label      : 262133                   Egress Label      : 262134
Ingr Mac Fltr-Id   : n/a                      Egr Mac Fltr-Id   : n/a
Ingr IP Fltr-Id    : n/a                      Egr IP Fltr-Id    : n/a
Ingr IPv6 Fltr-Id  : n/a                      Egr IPv6 Fltr-Id  : n/a
BGP IPv4 FlowSpec  : Disabled
BGP IPv6 FlowSpec  : Disabled
Admin ControlWord  : Not Preferred            Oper ControlWord  : False
BFD Template       : None
BFD-Enabled        : no                       BFD-Encap         : ipv4
Last Status Change : 05/27/2015 07:15:06      Signaling         : TLDP
Last Mgmt Change   : 05/27/2015 07:14:43      
Class Fwding State : Down                     
Flags              : None
Local Pw Bits      : None
Peer Pw Bits       : None
Peer Fault Ip      : None                     
Peer Vccv CV Bits  : lspPing bfdFaultDet
Peer Vccv CC Bits  : mplsRouterAlertLabel
 
Application Profile: None                     
Transit Policy     : None                     
AARP Id            : None                     
 
Ingress Qos Policy : (none)                   Egress Qos Policy : (none)
Ingress FP QGrp    : (none)                   Egress Port QGrp  : (none)
Ing FP QGrp Inst   : (none)                   Egr Port QGrp Inst: (none)
 
KeepAlive Information :
Admin State        : Enabled                  Oper State        : Alive
Hello Time         : 10                       Hello Msg Len     : 0
Max Drop Count     : 3                        Hold Down Time    : 10
 
Statistics            :
I. Fwd. Pkts.      : 100                      I. Dro. Pkts.     : 0
I. Fwd. Octs.      : 61300                    I. Dro. Octs.     : 0
E. Fwd. Pkts.      : 15                       E. Fwd. Octets    : 900
 
-------------------------------------------------------------------------------
Control Channel Status
-------------------------------------------------------------------------------
PW Status          : disabled                 Refresh Timer     : <none>
Peer Status Expire : false                    
Request Timer      : <none>                   
Acknowledgement    : false                    
 
-------------------------------------------------------------------------------
ETH-CFM SDP-Bind specifics
-------------------------------------------------------------------------------
Squelch Levels     : None                     
 
-------------------------------------------------------------------------------
RSVP/Static LSPs
-------------------------------------------------------------------------------
Associated LSP List :
No LSPs Associated
 
-------------------------------------------------------------------------------
Class-based forwarding :
-------------------------------------------------------------------------------
Class forwarding   : Disabled                 EnforceDSTELspFc  : Disabled
Default LSP        : Uknwn                    Multicast LSP     : None
 
===============================================================================
FC Mapping Table
===============================================================================
FC Name             LSP Name
-------------------------------------------------------------------------------
No FC Mappings
 
-------------------------------------------------------------------------------
Segment Routing
-------------------------------------------------------------------------------
OSPF               : enabled                  LSP Id            : 524296
Oper Instance Id   : 0                        
-------------------------------------------------------------------------------
Number of SDPs : 1
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Service Access Points
-------------------------------------------------------------------------------
No Sap Associations
 
-------------------------------------------------------------------------------
Service Interfaces
-------------------------------------------------------------------------------
 
-------------------------------------------------------------------------------
Interface
-------------------------------------------------------------------------------
If Name           : ies-1
Admin State       : Up                  Oper (v4/v6)      : Up/Down
Protocols         : None
IP Addr/mask      : 10.3.1.3/24         Address Type      : Primary
IGP Inhibit       : Disabled            Broadcast Address : Host-ones
HoldUp-Time       : 0                   Track Srrp Inst   : 0
Description       : N/A
-------------------------------------------------------------------------------
Details
-------------------------------------------------------------------------------
Description       : (Not Specified)
If Index          : 3                   Virt. If Index    : 3
Last Oper Chg     : 05/27/2015 07:15:06 Global If Index   : 257
Mon Oper Grp      : None                
Srrp En Rtng      : Disabled            Hold time         : N/A
SDP Id            : spoke-6:1
 
Spoke-SDP Details
Admin State       : Up                  Oper State        : Up
Hash Label        : Disabled            Hash Lbl Sig Cap  : Disabled
Oper Hash Label   : Disabled            
Peer Fault Ip     : None                
Local Pw Bits      : None
Peer Pw Bits       : None
Peer Vccv CV Bits  : lspPing bfdFaultDet
Peer Vccv CC Bits  : mplsRouterAlertLabel
Flags              : None
 
TOS Marking       : Untrusted           If Type           : IES
SNTP B.Cast       : False               IES ID            : 1
MAC Address       : 66:34:ff:00:00:00   Mac Accounting    : Disabled
Ingress stats     : Disabled            IPv6 DAD          : Enabled
TCP MSS V4        : 0                   TCP MSS V6        : 0
ARP Timeout       : 14400s              IPv6 Nbr ReachTime: 30s
ARP Retry Timer   : 5000ms              IPv6 stale time   : 14400s
ARP Limit         : Disabled            IPv6 Nbr Limit    : Disabled
ARP Threshold     : Disabled            IPv6 Nbr Threshold: Disabled
ARP Limit Log Only: Disabled            IPv6 Nbr Log Only : Disabled
IP MTU            : 1400                
IP Oper MTU       : 1400                ICMP Mask Reply   : True
ARP Populate      : Disabled            Host Conn Verify  : Disabled
SHCV pol IPv4     : None
Cflowd (unicast)  : None                Cflowd (multicast): None
LdpSyncTimer      : None                
LSR Load Balance  : system              
EGR Load Balance  : both                
Vas If Type       : none                
TEID Load Balance : Disabled            
SPI Load Balance  : Disabled            
uRPF Chk          : disabled            
uRPF Ipv6 Chk     : disabled            
PTP HW Assist     : Disabled            
Rx Pkts           : 100                 Rx Bytes          : 62236
Rx V4 Pkts        : N/A                 Rx V4 Bytes       : N/A
Rx V6 Pkts        : N/A                 Rx V6 Bytes       : N/A
Tx Pkts           : 15                  Tx Bytes          : 900
Tx V4 Pkts        : 0                   Tx V4 Bytes       : 0
Tx V4 Discard Pkts: 0                   Tx V4 Discard Byt*: 0
Tx V6 Pkts        : 0                   Tx V6 Bytes       : 0
Tx V6 Discard Pkts: 0                   Tx V6 Discard Byt*: 0
Mpls Rx Pkts      : 0                   Mpls Rx Bytes     : 0
Mpls Tx Pkts      : 0                   Mpls Tx Bytes     : 0
 
Proxy ARP Details
Rem Proxy ARP     : Disabled            Local Proxy ARP   : Disabled
Policies          : none                
 
Proxy Neighbor Discovery Details
Local Pxy ND      : Disabled            
Policies          : none                
 
DHCP no local server
 
DHCP Details
Description  : (Not Specified)
Admin State       : Down                Lease Populate    : 0
Gi-Addr           : 10.3.1.3*           Gi-Addr as Src Ip : Disabled 
* = inferred gi-address from interface IP address
 
Action            : Keep                Trusted           : Disabled
 
DHCP Proxy Details
Admin State       : Down                
Lease Time        : N/A                 
Emul. Server      : Not configured      
 
Subscriber Authentication Details
Auth Policy       : None                
 
DHCP6 Relay Details
Description       : (Not Specified)
Admin State       : Down                Lease Populate    : 0
Oper State        : Down                Nbr Resolution    : Disabled
If-Id Option      : None                Remote Id         : Disabled
Src Addr          : Not configured
Python plcy       : (Not Specified)     
 
DHCP6 Server Details
Admin State       : Down                Max. Lease States : 8000
 
ISA Tunnel redundant next-hop information
Static Next-Hop   :                     
Dynamic Next-Hop  :                     
 
ICMP Details
Redirects    : Number - 100                     Time (seconds)   - 10   
Unreachables : Number - 100                     Time (seconds)   - 10   
TTL Expired  : Number - 100                     Time (seconds)   - 10   
 
IPCP Address Extension Details
Peer IP Addr      : Not configured      
Peer Pri DNS Addr : Not configured      
Peer Sec DNS Addr : Not configured      
 
Network Domains Associated
default
 
-------------------------------------------------------------------------------
Admin Groups
-------------------------------------------------------------------------------
No Matching Entries
-------------------------------------------------------------------------------
 
-------------------------------------------------------------------------------
Srlg Groups
-------------------------------------------------------------------------------
No Matching Entries
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
QoS Queue-Group Redirection Details
-------------------------------------------------------------------------------
Ingress FP QGrp   : (none)              Egress Port QGrp  : (none)
Ing FP QGrp Inst  : (none)              Egr Port QGrp Inst: (none)
===============================================================================
* indicates that the corresponding row element may have been truncated.
*B:Dut-C# 
arp
Syntax
arp [ip-address] | [mac ieee-address] | [sap sap-id] | [interface ip-int-name] [sdp sdp-id:vc-id]
Context
show>service>id
Description
Displays the ARP table for the IES instance. The ARP entries are displayed uniquely. Each MAC associated with the child group-interfaces are displayed with each ARP entry. They do not reflect actual ARP entries but are displayed along the interfaces ARP entry for easy lookup.
Parameters
ip-address
Displays only ARP entries in the ARP table with the specified IP address.
Default
mac ieee-address
Displays only ARP entries in the ARP table with the specified 48-bit MAC address. The MAC address can be expressed in the form aa:bb:cc:dd:ee:ff or aa-bb-cc-dd-ee-ff where aa, bb, cc, dd, ee and ff are hexadecimal numbers.
Default
sap sap-id
Displays SAP information for the specified SAP ID. See Common CLI Command Descriptions for command syntax.
port-id
interface
Specifies matching service ARP entries associated with the IP interface.
ip-address
The IP address of the interface for which to display matching ARP entries.
Values
ip-int-name
The IP interface name for which to display matching ARPs.
sdp-id
The SDP identifier.
vc-id
The virtual circuit identifier.
Values
Output
Show Service-ID ARP
The following table describes show service-id ARP output fields.
 
Sample Output
A:ALA-49# show service id 88 arp
====================================================================================
ARP Table
====================================================================================
IP Address   MAC Address        Type    Expiry       Interface   SAP
------------------------------------------------------------------------------------
11.30.1.1    76:1e:ff:00:01:41  Other   00h00m00s    ies30       lag-1:30
11.31.1.1    76:1e:ff:00:01:41  Other   00h00m00s    ies30       lag-1:30
11.37.1.1    00:00:00:00:00:00  Other   00h00m00s    foo2        n/a
11.20.1.1    76:1e:ff:00:00:00  Other   00h00m00s    s2          subscrib*
             76:1e:ff:00:01:41                       g3          lag-1
11.20.1.10   00:00:aa:aa:aa:dd  Managed 00h00m00s    g3          lag-1:11
11.20.1.11   00:00:aa:aa:aa:dd  Managed 00h00m00s    g3          lag-1:11
11.20.1.12   00:00:aa:aa:aa:dd  Managed 00h00m00s    g3          lag-1:11
11.38.1.1    76:1e:ff:00:00:00  Other   00h00m00s    s3          subscrib*
             76:21:04:01:00:01                       g5          4/1/1
             76:21:04:01:00:01                       g7          4/1/1
11.39.1.1    76:1e:ff:00:00:00  Other   00h00m00s    s3          subscrib*
             76:21:04:01:00:01                       g5          41/1/1
             76:21:04:01:00:01                       g7          4/1/1
11.38.1.2    76:22:07:01:00:01  Managed 00h00m00s    g7          4/1/1:25*
11.38.10.1   76:22:07:01:00:01  Managed 00h00m00s    g7          4/1/1:25*
11.38.99.1   76:22:07:01:00:01  Managed 00h00m00s    g7          4/1/1:25*
====================================================================================
* indicats that the corresponding row element may have been truncated.
A:ALA-49#
arp-host
Syntax
arp-host [wholesaler service-id] [sap sap-id | interface interface-name | ip-address ip-address[/mask] | mac ieee-address | {[port port-id] [no-inter-dest-id | inter-dest-id inter-dest-id]}] [detail]
arp-host statistics [sap sap-id | interface interface-name]
arp-host summary [interface interface-name]
Context
show>service>id
Description
This command displays ARP host related information.
Sample Output
*A:Dut-C# show service id 2 arp-host 
===============================================================================
ARP host table, service 2
===============================================================================
IP Address      Mac Address       Sap Id              Remaining           MC   
                                                      Time                Stdby
-------------------------------------------------------------------------------
128.128.1.2     00:80:00:00:00:01 2/1/5:2             00h04m41s                
128.128.1.3     00:80:00:00:00:02 2/1/5:2             00h04m42s                
128.128.1.4     00:80:00:00:00:03 2/1/5:2             00h04m43s                
128.128.1.5     00:80:00:00:00:04 2/1/5:2             00h04m44s                
128.128.1.6     00:80:00:00:00:05 2/1/5:2             00h04m45s                
128.128.1.7     00:80:00:00:00:06 2/1/5:2             00h04m46s                
128.128.1.8     00:80:00:00:00:07 2/1/5:2             00h04m47s                
128.128.1.9     00:80:00:00:00:08 2/1/5:2             00h04m48s                
128.128.1.10    00:80:00:00:00:09 2/1/5:2             00h04m49s                
128.128.1.11    00:80:00:00:00:0a 2/1/5:2             00h04m50s                
-------------------------------------------------------------------------------
Number of ARP hosts : 10
===============================================================================
*A:Dut-C#
 
 
*A:Dut-C# show service id 2 arp-host ip-address 128.128.1.2 detail 
===============================================================================
ARP hosts for service 2
===============================================================================
Service ID           : 2                                                       
IP Address           : 128.128.1.2
MAC Address          : 00:80:00:00:00:01                                       
SAP                  : 2/1/5:2                                                 
Remaining Time       : 00h04m58s                                               
 
Sub-Ident            : "alu_1_2"                                               
Sub-Profile-String   : ""                                                      
SLA-Profile-String   : ""                                                      
App-Profile-String   : ""                                                      
ARP host ANCP-String : ""
ARP host Int Dest Id : ""
RADIUS-User-Name     : "128.128.1.2"
 
Session Timeout (s)  : 301                                                     
Start Time           : 02/09/2009 16:35:07                                     
Last Auth            : 02/09/2009 16:36:34                                     
Last Refresh         : 02/09/2009 16:36:38                                     
Persistence Key      : N/A                                                     
-------------------------------------------------------------------------------
Number of ARP hosts : 1
===============================================================================
*A:Dut-C#
 
 
*A:Dut-C# show service id 2 arp-host statistics                    
==============================================================================
ARP host statistics
==============================================================================
Num Active Hosts             : 20                                             
Received Triggers            : 70                                             
Ignored Triggers             : 10                                             
Ignored Triggers (overload)  : 0                                              
SHCV Checks Forced           : 0                                              
Hosts Created                : 20                                             
Hosts Updated                : 40                                             
Hosts Deleted                : 0                                              
Authentication Requests Sent : 40                                             
==============================================================================
*A:Dut-C#
 
 
*A:Dut-C# show service id 2 arp-host summary    
=============================================================
ARP host Summary, service 2
=============================================================
Sap                    Used        Provided    Admin State                     
-------------------------------------------------------------
sap:2/1/5:2            20          8000        inService     
-------------------------------------------------------------
Number of SAPs : 1
-------------------------------------------------------------
=============================================================
*A:Dut-C#
statistics
Syntax
statistics [policy name] [sap sap-id]
Context
show>service>id>authentication
Description
Displays session authentication statistics for this service.
Parameters
policy name
Specifies the subscriber authentication policy statistics to display.
sap sap-id
Specifies the SAP ID statistics to display. See Common CLI Command Descriptions for command syntax.
See Common CLI Command Descriptions for command syntax.
Sample Output
*A:ALA-1# show service id 11 authentication statistics
---------------------------------------------------------------
Authentication statistics
---------------------------------------------------------------
Interface / SAP                 Authentication  Authentication
                                Successful      Failed
---------------------------------------------------------------
abc-11-90.1.0.254               1582            3
---------------------------------------------------------------
Number of entries: 1
===============================================================
*A:ALA-1#
authentication
Syntax
authentication
Context
show>service>id
Description
This command enables the context to display subscriber authentication information.
base
Syntax
base
Context
show>service>id
Description
This command displays basic information about this IES service.
Sample Output
*A:ALA-A# show service id 100 base
---------------------------------------------------------------
Service Basic Information
---------------------------------------------------------------
Service Id        : 100                 Vpn Id            : 100
Service Type      : IES
Description       : Default Ies description for service id 100
Customer Id       : 1
Last Status Change: 08/29/2006 17:44:28
Last Mgmt Change  : 08/29/2006 17:44:28
Admin State       : Up                  Oper State        : Up
SAP Count         : 2
-------------------------------------------------------------------------------
Service Access & Destination Points
-------------------------------------------------------------------------------
Identifier                       Type         AdmMTU  OprMTU  Adm     Opr
-------------------------------------------------------------------------------
sap:1/1/3                        null         1514    1514    Up      Up
sap:1/1/4                        null         1514    1514    Up      Up
===============================================================================
*A:ALA-A#
dhcp
Syntax
dhcp
Context
show>service>id
Description
This command enables the context to display DHCP information for the specified service.
lease-state
Syntax
lease-state [[sap sap-id] | [sdp sdp-id:vc-id] | [interface interface-name] | [ip-address ip-address]] [detail]
Context
show>service>id>dhcp
Description
This command displays DHCP lease state related information.
Parameters
sap sap-id
Specifies the physical port identifier portion of the SAP definition. See Common CLI Command Descriptions for command syntax.
sdp-id
The SDP identifier.
Values
vc-id
The virtual circuit ID on the SDP ID for which to display information.
Values
interface interface-name
Displays information for the specified IP interface.
ip-address ip-address
Displays information associated with the specified IP address.
detail
Displays detailed information.
Sample Output
A:ALA-_Dut-A# show service id 13 dhcp lease-state 
===============================================================================
DHCP lease state table, service 13
===============================================================================
IP Address      Mac Address       Sap/Sdp Id          Remaining  Lease    MC   
                                                      LifeTime   Origin   Stdby
-------------------------------------------------------------------------------
13.13.40.1      00:00:00:00:00:13 1/1/1:13            00h00m58s  Radius        
-------------------------------------------------------------------------------
Number of lease states : 1
===============================================================================
A:ALA-_Dut-A# 
 
 
A:ALA-_Dut-A# show service id 13 dhcp lease-state detail 
===============================================================================
DHCP lease states for service 13
===============================================================================
Service ID           : 13                                                      
IP Address           : 13.13.40.1
Mac Address          : 00:00:00:00:00:13                                       
Interface            : ies-13-13.13.1.1                                        
SAP                  : 1/1/1:13                                                
Remaining Lifetime   : 00h00m58s                                               
Persistence Key      : N/A                                                     
 
Sub-Ident            : "TEST"                                              
Sub-Profile-String   : "ADSL GO"                                               
SLA-Profile-String   : "BE-Video"                                              
Lease ANCP-String    : ""
 
Sub-Ident origin     : Radius                                                  
Strings origin       : Radius                                                  
Lease Info origin    : Radius                                                  
 
Ip-Netmask           : 255.255.0.0                                             
Broadcast-Ip-Addr    : 13.13.255.255                                           
Default-Router       : N/A                                                     
Primary-Dns          : 13.13.254.254                                           
Secondary-Dns        : 13.13.254.253                                           
 
ServerLeaseStart     : 12/24/2006 23:44:07                                     
ServerLastRenew      : 12/24/2006 23:44:07                                     
ServerLeaseEnd       : 12/24/2006 23:45:07                                     
Session-Timeout      : 0d 00:01:00                                             
DHCP Server Addr     : N/A                                                     
 
Persistent Relay Agent Information
  Circuit Id         : ancstb6_Dut-A|13|ies-13-13.13.1.1|0|13
  Remote Id          : stringtest
-------------------------------------------------------------------------------
Number of lease states : 1
===============================================================================
A:ALA-_Dut-A# 
Routed CO Output Example
A:ALA-_Dut-A# show service id 13 dhcp lease-state 
===============================================================================
DHCP lease state table, service 13
===============================================================================
IP Address      Mac Address       Sap/Sdp Id          Remaining  Lease    MC   
                                                      LifeTime   Origin   Stdby
-------------------------------------------------------------------------------
13.13.40.1      00:00:00:00:00:13 1/1/1:13            00h00m58s  Radius        
-------------------------------------------------------------------------------
Number of lease states : 1
===============================================================================
A:ALA-_Dut-A# 
 
 
A:ALA-_Dut-A# show service id 13 dhcp lease-state detail 
===============================================================================
DHCP lease states for service 13
===============================================================================
Service ID           : 13                                                      
IP Address           : 13.13.40.1
Mac Address          : 00:00:00:00:00:13                                       
Subscriber-interface : ies-13-13.13.1.1                                        
Group-interface      : intf-13                                                 
SAP                  : 1/1/1:13                                                
Remaining Lifetime   : 00h00m58s                                               
Persistence Key      : N/A                                                     
 
Sub-Ident            : "TEST"                                              
Sub-Profile-String   : "ADSL GO"                                               
SLA-Profile-String   : "BE-Video"                                              
Lease ANCP-String    : ""
 
Sub-Ident origin     : Radius                                                  
Strings origin       : Radius                                                  
Lease Info origin    : Radius                                                  
 
Ip-Netmask           : 255.255.0.0                                             
Broadcast-Ip-Addr    : 13.13.255.255                                           
Default-Router       : N/A                                                     
Primary-Dns          : 13.13.254.254                                           
Secondary-Dns        : 13.13.254.253                                           
 
ServerLeaseStart     : 12/24/2006 23:48:23                                     
ServerLastRenew      : 12/24/2006 23:48:23                                     
ServerLeaseEnd       : 12/24/2006 23:49:23                                     
Session-Timeout      : 0d 00:01:00                                             
DHCP Server Addr     : N/A                                                     
 
Persistent Relay Agent Information
  Circuit Id         : ancstb6_Dut-A|13|intf-13|0|13
  Remote Id          : stringtest
-------------------------------------------------------------------------------
Number of lease states : 1
===============================================================================
A:ALA-_Dut-A# 
 
 
Wholesaler/Retailer Output Example
A:ALA-_Dut-A# show service id 2000 dhcp lease-state detail 
===============================================================================
DHCP lease states for service 2000
-------------------------------------------------------------------------------
Wholesaler 1000 Leases
-------------------------------------------------------------------------------
Service ID           : 1000                                                    
IP Address           : 13.13.1.254
Mac Address          : 00:00:00:00:00:13                                       
Subscriber-interface : whole-sub                                               
Group-interface      : intf-13                                                 
Retailer             : 2000                                                    
Retailer If          : retail-sub                                              
SAP                  : 1/1/1:13                                                
Remaining Lifetime   : 00h09m59s                                               
Persistence Key      : N/A                                                     
 
Sub-Ident            : "TEST"                                              
Sub-Profile-String   : "ADSL GO"                                               
SLA-Profile-String   : "BE-Video"                                              
Lease ANCP-String    : ""
 
Sub-Ident origin     : Retail DHCP                                             
Strings origin       : Retail DHCP                                             
Lease Info origin    : Retail DHCP                                             
 
Ip-Netmask           : 255.255.0.0                                             
Broadcast-Ip-Addr    : 13.13.255.255                                           
Default-Router       : N/A                                                     
Primary-Dns          : N/A                                                     
Secondary-Dns        : N/A                                                     
 
ServerLeaseStart     : 12/25/2006 00:29:41                                     
ServerLastRenew      : 12/25/2006 00:29:41                                     
ServerLeaseEnd       : 12/25/2006 00:39:41                                     
Session-Timeout      : 0d 00:10:00                                             
DHCP Server Addr     : 10.232.237.2                                            
 
Persistent Relay Agent Information
  Circuit Id         : 1/1/1:13
  Remote Id          : stringtest
-------------------------------------------------------------------------------
Number of lease states : 1
===============================================================================
A:ALA-_Dut-A#
statistics
Syntax
statistics [sap sap-id
statistics [sdp sdp-id:vc-id]
statistics [interface interface-name]
Context
show>service>id>dhcp
Description
Displays DHCP statistics information.
Parameters
sap sap-id
Specifies the physical port identifier portion of the SAP definition. See Common CLI Command Descriptions for command syntax.
sdp-id
The SDP identifier.
Values
vc-id
The virtual circuit ID on the SDP ID for which to display information.
Values
interface interface-name
Displays information for the specified IP interface.
summary
Syntax
summary
Context
show>service>id>dhcp
Description
Displays DHCP configuration summary information.
Output
Show DHCP Summary Output
The following table describes the output fields for DHCP summary.
 
Sample Output
A:ALA-49# show service id 88 dhcp summary
===============================================================================
DHCP Summary, service 88
===============================================================================
Interface Name                   Arp      Used/                 Info    Admin
  SapId/Sdp                      Populate Provided              Option  State
-------------------------------------------------------------------------------
Sector A                         No       0/0                   Keep    Up
  sap:7/1/1.2.2                           0/0
grp-if                           No       0/1                   Keep    Down
  sap:2/2/2:0                             0/1
  sap:2/2/2:0                             0/1
test                             No       0/0                   Keep    Up
  sap:10/1/2:0                            0/0
-------------------------------------------------------------------------------
Interfaces: 3
===============================================================================
A:ALA-49#
gsmp
Syntax
gsmp
Context
show>service>id
Description
This command enables the context to display GSMP information.
neighbors
Syntax
neighbors group [name] [ip-address]
Context
show>service>id>gsmp
Description
This command displays GSMP neighbor information.
Parameters
group
A GSMP group defines a set of GSMP neighbors which have the same properties.
name
Specifies a GSMP group name is unique only within the scope of the service in which it is defined.
ip-address
Specifies the ip-address of the neighbor.
Sample Output
These commands show the configured neighbors per service, regardless of the fact there exists an open TCP connection with this neighbor. The admin state is shown because for a neighbor to be admin enabled, the service, gsmp node, group node and the neighbor node in this service must all be in 'no shutdown' state. Session gives the number of session (open TCP connections) for each configured neighbor.
A:active>show>service>id>gsmp# neighbors
============================================================================
GSMP neighbors
============================================================================
Group Neighbor AdminState Sessions
----------------------------------------------------------------------------
dslam1 192.168.1.2 Enabled 0
dslam1 192.168.1.3 Enabled 0
----------------------------------------------------------------------------
Number of neighbors shown: 2
============================================================================
A:active>show>service>id>gsmp#
 
 
A:active>show>service>id>gsmp# neighbors group dslam1
============================================================================
GSMP neighbors
============================================================================
Group Neighbor AdminState Sessions
----------------------------------------------------------------------------
dslam1 192.168.1.2 Enabled 0
dslam1 192.168.1.3 Enabled 0
----------------------------------------------------------------------------
Number of neighbors shown: 2
============================================================================
A:active>show>service>id>gsmp#
A:active>show>service>id>gsmp# neighbors group dslam1 192.168.1.2
============================================================================
GSMP neighbors
============================================================================
Group Neighbor AdminState Sessions
----------------------------------------------------------------------------
dslam1 192.168.1.2 Enabled 0
============================================================================
A:active>show>service>id>gsmp#
sessions
Syntax
sessions [group name] neighbor ip-address] [port port-number] [association] [statistics]
Context
show>service>id>gsmp
Description
This command displays GSMP sessions information.
Parameters
group
A GSMP group defines a set of GSMP neighbors which have the same properties.
name
Specifies a GSMP group name is unique only within the scope of the service in which it is defined.
ip-address
Specifies the ip-address of the neighbor.
port
Specifies the neighbor TCP port number use for this ANCP session.
Values
association
Displays to what object the ANCP-string is associated.
statistics
Displays statistics information about an ANCP session known to the system.
Sample Output
This show command gives information about the open TCP connections with DSLAMs.
A:active>show>service>id>gsmp# sessions
=======================================================
GSMP sessions for service 999 (VPRN)
=======================================================
Port Ngbr-IpAddr Gsmp-Group
-------------------------------------------------------
40590 192.168.1.2 dslam1
-------------------------------------------------------
Number of GSMP sessions : 1
=======================================================
A:active>show>service>id>gsmp#
 
 
A:active>show>service>id>gsmp# sessions neighbor 192.168.1.2 port 40590
=========================================================================
GSMP sessions for service 999 (VPRN), neighbor 192.168.1.2, Port 40590 =========================================================================
State : Established
Peer Instance : 1 Sender Instance : a3cf58
Peer Port : 0 Sender Port : 0
Peer Name : 12:12:12:12:12:12 Sender Name : 00:00:00:00:00:00
timeouts : 0 Max. Timeouts : 3
Peer Timer : 100 Sender Timer : 100
Capabilities : DTD OAM
Conf Capabilities : DTD OAM
Priority Marking : dscp nc2
Local Addr. : 192.168.1.4
Conf Local Addr. : N/A
=========================================================================
A:active>show>service>id>gsmp#
 
 
A:active>show>service>id>gsmp# sessions neighbor 192.168.1.2 port 40590 association
===============================================================================
ANCP-Strings
===============================================================================
ANCP-String Assoc. State
-------------------------------------------------------------------------------
No ANCP-Strings found
===============================================================================
A:active>show>service>id>gsmp#
 
 
A:active>show>service>id>gsmp# sessions neighbor 192.168.1.2 port 40590 statistics
===============================================================
GSMP session stats, service 999 (VPRN), neighbor 192.168.1.2, Port 40590 ===============================================================
Event Received Transmitted
---------------------------------------------------------------
Dropped 0 0
Syn 1 1
Syn Ack 1 1
Ack 14 14
Rst Ack 0 0
Port Up 0 0
Port Down 0 0
OAM Loopback 0 0
===============================================================
A:active>show>service>id>gsmp#
 
Note: The association command gives an overview of each ANCP string received from this session.
A:active>show>service>id>gsmp# sessions neighbor 192.168.1.2 port 40590 association
===============================================================================
ANCP-Strings
===============================================================================
ANCP-String Assoc.
State
-------------------------------------------------------------------------------
7330-ISAM-E47 atm 1/1/01/01:19425.64048 ANCP Up
-------------------------------------------------------------------------------
Number of ANCP-Strings : 1
===============================================================================
A:active>show>service>id>gsmp#
host
Syntax
host
Context
show>service>id
Description
Displays static hosts configured for this IES service.
Output
Show All Service-ID Output
The following table describes the show all service-id command output fields.
Sample Output
*A:ALA-48# show service id 88  host
===============================================================================
Static Hosts for service 88
===============================================================================
Sap                         IP Address      Configured MAC    Dynamic MAC
  Subscriber                                                    Fwding state
-------------------------------------------------------------------------------
1/2/4:50/5                  143.144.145.1   N/A               N/A
   N/A                                                          Fwding
-------------------------------------------------------------------------------
Number of static hosts : 1
===============================================================================
*A:ALA-48#
host-connectivity-verify
Syntax
host-connectivity-verify statistics [sap sap-id]
Context
show>service>id
Description
Displays host connectivity check statistics.
Parameters
statistics
Displays host connectivity verification data.
sap sap-id
See Common CLI Command Descriptions for command syntax.
Output
Show Service Id Host Connectivity Verify
The following table describes show service-id host connectivity verification output fields:
Sample Output
A:ALA-48>show>service>id# host-connectivity-verify statistics sap 1/1/9:0
==============================================================================
Host connectivity check statistics
==============================================================================
Svc   SapId/          DestIp          Last                   Time 	Oper
Id    SdpId           Address         Response               Expired 	State
------------------------------------------------------------------------------
1000  551/2/3:0       143.144.145.1 	Up
==============================================================================
A:ALA-48>show>service>id#
interface
Syntax
interface [ip-address | ip-int-name] [interface-type] [detail] [family]
Context
show>service>id
Description
This command displays information for the IP interfaces associated with the IES service. If no optional parameters are specified, a summary of all IP interfaces associated to the service are displayed.
Parameters
ip-address
The IP address of the interface for which to display information.
Values
ip-int-name
Specifies the IP interface name for which to display information.
Values
family
Displays the router IP interface table to display.
Values
ipv4 — Displays only those peers that have the IPv4 family enabled.
ipv6 — Displays the peers that are IPv6-capable.
interface-type
Specifies to display either group or interfaces.
Values
detail
Displays detailed IP interface information.
Default
Output
Show Service-ID
The following table describes show service-id output fields.
 
Sample Output
A:ALA-49# show service id 88 interface
===============================================================================
Interface Table
===============================================================================
Interface-Name                   Adm         Opr(v4/v6)  Type    Port/SapId
   IP-Address                                                    PfxState
-------------------------------------------------------------------------------
Sector A                         Up          Down/Down   IES     1/1/1.2.2
   -                                                             -
test                             Up          Down/Down   IES     1/1/2:0
   1.1.1.1/31                                                    n/a
   1.1.1.1/31                                                    n/a
   1.1.2.1/31                                                    n/a
test27                           Up          Up/--       IES Sub subscriber
   192.168.10.21/24                                              n/a
grp-if                           Up          Down/--     IES Grp 1/2/2
Interfaces : 4
===============================================================================
A:ALA-49#
labels
Syntax
labels
Context
show>service>id
Description
Displays the labels being used by the service.
Output
Show Service-ID Labels
The following table describes show service-id labels output fields:
Sample Output
*A:ALA-12# show service id 1 labels
============================================================================== 
Martini Service Labels                                                          
============================================================================== 
Svc Id     Sdp Id             Type I.Lbl        E.Lbl                           
------------------------------------------------------------------------------ 
1          10:1               Mesh 0            0                               
1          20:1               Mesh 0            0                               
1          30:1               Mesh 0            0                               
1          40:1               Mesh 130081       131061                          
1          60:1               Mesh 131019       131016                          
1          100:1              Mesh 0            0                               
------------------------------------------------------------------------------ 
Number of Bound SDPs : 6                                                       
------------------------------------------------------------------------------ 
*A:ALA-12#
sdp
Syntax
sdp sdp-id pw-port [pw-port-id]
sdp sdp-id pw-port
sdp sdp-id pw-port [pw-port-id] [statistics]
sdp [consistent | inconsistent | na] egressifs
sdp sdp-id keep-alive-history
sdp far-end ip-address | ipv6-address keep-alive-history
sdp [sdp-id] detail
sdp far-end ip-address | ipv6-address detail
Context
show>service>sdp
Description
Displays information for the SDPs associated with the service.
If no optional parameters are specified, a summary of all associated SDPs is displayed.
Parameters
sdp-id
Specifies the SDP ID for which to display information.
Default
Values
pw-port-id
Specifies the pseudo-wire port identifier.
Values
far-end ip-address
Displays only SDPs matching with the specified far-end IP address.
Default
detail
Displays detailed SDP information.
Default
keep-alive-history
Displays the last fifty SDP keepalive events for the SDP.
Default
Sample Output
*A:ALA-12>config>service# show service sdp 1 pw-port
===============================================================================
Service Destination Point (sdp Id 1 Pw-Port)
===============================================================================
Pw-port   VC-Id     Adm     Encap       Opr     VC Type     Egr       Monitor
                                                            Shaper    Oper
                                                            VPort     Group
-------------------------------------------------------------------------------
1         1         up      dot1q       up      ether
2         2         up      qinq        up      ether
3         3         up      dot1q       up      ether
4         4         up      qinq        up      ether
-------------------------------------------------------------------------------
Entries found : 4
===============================================================================
 
*A:ALA-12>config>service# show service sdp 1 pw-port 3
 
===============================================================================
Service Destination Point (Sdp Id 1 Pw-Port 3)
===============================================================================
SDP Binding port     : lag-1
VC-Id                : 3                     Admin Status       : up
Encap                : dot1q                 Oper Status        : up
VC Type              : ether
Oper Flags           : (Not Specified)
Monitor Oper-Group   : (Not Specified)
===============================================================================
 
*A:ALA-12>config>service# show service sdp 1 pw-port 3 statistics
 
===============================================================================
Service Destination Point (Sdp Id 1 Pw-Port 3)
===============================================================================
SDP Binding port     : lag-1
VC-Id                : 3                     Admin Status       : up
Encap                : dot1q                 Oper Status        : up
VC Type              : ether
Oper Flags           : (Not Specified)
Monitor Oper-Group   : (Not Specified)
 
Statistics            :
I. Fwd. Pkts.        : 0                     I. Dro. Pkts.      : 0
I. Fwd. Octs.        : 0                     I. Dro. Octs.      : 0
E. Fwd. Pkts.        : 0                     E. Fwd. Octets     : 0
===============================================================================
 
 
*A:Dut-B# show service sdp
 
============================================================================
Services: Service Destination Points
============================================================================
SdpId  AdmMTU  OprMTU  Far End          Adm  Opr         Del     LSP   Sig
----------------------------------------------------------------------------
230    0       1582    10.20.1.3        Up   Up          MPLS    I     TLDP
----------------------------------------------------------------------------
Number of SDPs : 1
----------------------------------------------------------------------------
Legend: R = RSVP, L = LDP, B = BGP, M = MPLS-TP, n/a = Not Applicable
============================================================================
*A:Dut-B# 
 
*A:Dut-B# show service sdp detail  
 
===============================================================================
Services: Service Destination Points Details
===============================================================================
-------------------------------------------------------------------------------
 Sdp Id 230  -10.20.1.3
-------------------------------------------------------------------------------
Description           : (Not Specified)
SDP Id               : 230                   SDP Source         : manual
Admin Path MTU       : 0                     Oper Path MTU      : 1582
Delivery             : MPLS                  
Far End              : 10.20.1.3
Tunnel Far End       : n/a                   LSP Types          : SR-ISIS
 
Admin State          : Up                    Oper State         : Up
Signaling            : TLDP                  Metric             : 0
Acct. Pol            : None                  Collect Stats      : Disabled
Last Status Change   : 01/28/2015 22:00:07   Adv. MTU Over.     : No
Last Mgmt Change     : 01/28/2015 21:59:53   VLAN VC Etype      : 0x8100
Bw BookingFactor     : 100                   PBB Etype          : 0x88e7
Oper Max BW(Kbps)    : 0                     Avail BW(Kbps)     : 0
Net-Domain           : default               Egr Interfaces     : Consistent
Flags                : None
 
Mixed LSP Mode Information :
Mixed LSP Mode       : Disabled              Active LSP Type    : SR-ISIS
 
KeepAlive Information :
Admin State          : Disabled              Oper State         : Disabled
Hello Time           : 10                    Hello Msg Len      : 0
Hello Timeout        : 5                     Unmatched Replies  : 0
Max Drop Count       : 3                     Hold Down Time     : 10
Tx Hello Msgs        : 0                     Rx Hello Msgs      : 0
 
Src B-MAC LSB        : <none>                Ctrl PW VC ID      : <none>
Ctrl PW Active       : n/a                   
 
-------------------------------------------------------------------------------
RSVP/Static LSPs
-------------------------------------------------------------------------------
Associated LSP List :
No LSPs Associated
 
-------------------------------------------------------------------------------
Class-based forwarding :
-------------------------------------------------------------------------------
Class forwarding     : Disabled              EnforceDSTELspFc   : Disabled
Default LSP          : Uknwn                 Multicast LSP      : None
 
===============================================================================
FC Mapping Table
===============================================================================
FC Name             LSP Name
-------------------------------------------------------------------------------
No FC Mappings
 
-------------------------------------------------------------------------------
Segment Routing
-------------------------------------------------------------------------------
ISIS                 : enabled               LSP Id             : 524289
Oper Instance Id     : 0                     
-------------------------------------------------------------------------------
Number of SDPs : 1
-------------------------------------------------------------------------------
===============================================================================
*A:Dut-B# 
 
 
*A:Dut-B>config>service>sdp# show service sdp       
 
============================================================================
Services: Service Destination Points
============================================================================
SdpId  AdmMTU  OprMTU  Far End          Adm  Opr         Del     LSP   Sig
----------------------------------------------------------------------------
230    0       1582    10.20.1.3        Up   Up          MPLS    O     TLDP
----------------------------------------------------------------------------
Number of SDPs : 1
----------------------------------------------------------------------------
Legend: R = RSVP, L = LDP, B = BGP, M = MPLS-TP, n/a = Not Applicable
        I = SR-ISIS, O = SR-OSPF
============================================================================
 
 
*A:Dut-B>config>service>sdp# show service sdp 230 detail  
 
===============================================================================
Service Destination Point (Sdp Id : 230) Details
===============================================================================
-------------------------------------------------------------------------------
 Sdp Id 230  -10.20.1.3
-------------------------------------------------------------------------------
Description           : (Not Specified)
SDP Id               : 230                   SDP Source         : manual
Admin Path MTU       : 0                     Oper Path MTU      : 1582
Delivery             : MPLS                  
Far End              : 10.20.1.3
Tunnel Far End       : n/a                   LSP Types          : SR-OSPF
 
Admin State          : Up                    Oper State         : Up
Signaling            : TLDP                  Metric             : 0
Acct. Pol            : None                  Collect Stats      : Disabled
Last Status Change   : 05/27/2015 06:59:46   Adv. MTU Over.     : No
Last Mgmt Change     : 05/27/2015 06:59:46   VLAN VC Etype      : 0x8100
Bw BookingFactor     : 100                   PBB Etype          : 0x88e7
Oper Max BW(Kbps)    : 0                     Avail BW(Kbps)     : 0
Net-Domain           : default               Egr Interfaces     : Consistent
Flags                : None
 
Mixed LSP Mode Information :
Mixed LSP Mode       : Disabled              Active LSP Type    : SR-OSPF
 
KeepAlive Information :
Admin State          : Disabled              Oper State         : Disabled
Hello Time           : 10                    Hello Msg Len      : 0
Hello Timeout        : 5                     Unmatched Replies  : 0
Max Drop Count       : 3                     Hold Down Time     : 10
Tx Hello Msgs        : 0                     Rx Hello Msgs      : 0
 
Src B-MAC LSB        : <none>                Ctrl PW VC ID      : <none>
Ctrl PW Active       : n/a                   
 
-------------------------------------------------------------------------------
RSVP/Static LSPs
-------------------------------------------------------------------------------
Associated LSP List :
No LSPs Associated
 
-------------------------------------------------------------------------------
Class-based forwarding :
-------------------------------------------------------------------------------
Class forwarding     : Disabled              EnforceDSTELspFc   : Disabled
Default LSP          : Uknwn                 Multicast LSP      : None
 
===============================================================================
FC Mapping Table
===============================================================================
FC Name             LSP Name
-------------------------------------------------------------------------------
No FC Mappings
 
-------------------------------------------------------------------------------
Segment Routing
-------------------------------------------------------------------------------
OSPF                 : enabled               LSP Id             : 524291
Oper Instance Id     : 0                     
===============================================================================
*A:Dut-B>config>service>sdp# 
pw-port
Syntax
pw-port [pw-port-id] [detail]
pw-port sdp sdp-id
pw-port sdp none
Context
show>pw-port
Description
Displays pseudo-wire port information.
If no optional parameters are specified, the command displays a summary of all defined PW ports. The optional parameters restrict output to only ports matching the specified properties.
Parameters
pw-port-id
Specifies the pseudo-wire port identifier.
Values
detail
Displays detailed port information that includes all the pw-port output fields.
sdp sdp-id
The SDP ID for which to display matching PW port information.
Values
Output
Show PW-Port
The following table describes show pw-port output fields:
Sample Output
*A:ALA-48>config>service# show pw-port
 
============================================================================
PW Port Information
============================================================================
PW Port   Encap          SDP        IfIndex             VC-Id
----------------------------------------------------------------------------
1         dot1q          1          1526726657          1
2         qinq           1          1526726658          2
3         dot1q          1          1526726659          3
4         qinq           1          1526726660          4
============================================================================
 
*A:ALA-48>config>service# show pw-port 3
============================================================================
PW Port Information
============================================================================
PW Port   Encap          SDP        IfIndex             VC-Id
----------------------------------------------------------------------------
3         dot1q          1          1526726659          3
============================================================================
*A:ALA-48>config>service# show pw-port 3 detail
 
===============================================================================
PW Port Information
===============================================================================
PW Port            : 3
Encap              : dot1q
SDP                : 1
IfIndex            : 1526726659
VC-Id              : 3
Description        : 1-Gig Ethernet dual fiber
===============================================================================
*A:ALA-48>config>pw-port$ show pw-port sdp none
 
============================================================================
PW Port Information
============================================================================
PW Port   Encap          SDP        IfIndex             VC-Id
----------------------------------------------------------------------------
5         dot1q                     1526726661
============================================================================
 
 
*A:ALA-48>config>pw-port$ show pw-port sdp 1
 
============================================================================
PW Port Information
============================================================================
PW Port   Encap          SDP        IfIndex             VC-Id
----------------------------------------------------------------------------
1         dot1q          1          1526726657          1
2         qinq           1          1526726658          2
3         dot1q          1          1526726659          3
4         qinq           1          1526726660          4
============================================================================
 
sap
Syntax
sap sap-id [detail]
Context
show>service>id
Description
Displays information for the SAPs associated with the service.
If no optional parameters are specified, a summary of all associated SAPs is displayed.
Parameters
sap-id
The ID that displays SAPs for the service in the slot/mda/port[.channel format. See Common CLI Command Descriptions for command syntax.
detail
Displays detailed information for the SAP.
Output
Show Service-ID SAP
The following table describes show service SAP fields:
 
Specifies an Ethernet type II Ethertype value.
Sample Output
A:ALA-49# show service id 88 sap 771/1/1.2.2
===============================================================================
Service Access Points(SAP)
===============================================================================
Service Id         : 88
SAP                : 1/1/1.2.2                Encap             : bcpNull
Admin State        : Up                       Oper State        : Down
Flags              : PortOperDown
                     SapEgressQoSMismatch
Last Status Change : 06/06/2006 08:22:07
Last Mgmt Change   : 06/06/2006 14:15:58
Admin MTU          : 1518                     Oper MTU          : 1518
Ingress qos-policy : 2                        Egress qos-policy : 1020
Shared Q plcy      : default                  Multipoint shared : Enabled
Ingress Filter-Id  : n/a                      Egress Filter-Id  : n/a
tod-suite          : None
Multi Svc Site     : None
Acct. Pol          : None                     Collect Stats     : Disabled
Anti Spoofing      : None                     Nbr Static Hosts  : 0
-------------------------------------------------------------------------------
Subscriber Management
-------------------------------------------------------------------------------
Admin State        : Down                     MAC DA Hashing    : False
Def Sub-Profile    : None
Def SLA-Profile    : None
Sub-Ident-Policy   : None
Subscriber Limit   : 1
Single-Sub-Parameters
 Prof Traffic Only : False
 Non-Sub-Traffic   : N/A
===============================================================================
A:ALA-49#
 
*A:PE-1# show service id 1 sap 1/2/1 queue-depth
 
===============================================================================
Queue Depth Information (Ingress SAP)
===============================================================================
No Matching Entries
===============================================================================
 
===============================================================================
Queue Depth Information (Egress SAP)
===============================================================================
-------------------------------------------------------------------------------
Name                      : 1->1/2/1->1
MBS                       : Def
 
-------------------------------------------------------------------------------
Queue Depths (percentage)
-------------------------------------------------------------------------------
0%-10% 11%-20% 21%-30% 31%-40% 41%-50% 51%-60% 61%-70% 71%-80% 81%-90% 91%-100%
-------------------------------------------------------------------------------
68.21  3.64    3.43    3.47    3.86    3.22    3.86    2.87    3.78    3.66
-------------------------------------------------------------------------------
Average Elapsed Time      : 0d 00:11:48
Wghtd Avg Polling Interval: 99 ms
-------------------------------------------------------------------------------
===============================================================================
*A:PE-1#
 
*A:PE# show service id 1 sap 1/1/1:1 detail
 
===============================================================================
Service Access Points(SAP)
===============================================================================
Service Id         : 1
SAP                : 1/1/1:1                  Encap             : q-tag
Description        : (Not Specified)
Admin State        : Up                       Oper State        : Up
Flags              : None
Multi Svc Site     : None
Last Status Change : 01/29/2015 10:51:49
Last Mgmt Change   : 01/28/2015 11:48:21
Sub Type           : regular
Dot1Q Ethertype    : 0x8100                   QinQ Ethertype    : 0x8100
Split Horizon Group: (Not Specified)
 
Etree Root Leaf Tag: Disabled                 Etree Leaf Tag    : 0
Etree Leaf AC      : Disabled
Max Nbr of MAC Addr: No Limit                 Total MAC Addr    : 0
Learned MAC Addr   : 0                        Static MAC Addr   : 0
OAM MAC Addr       : 0                        DHCP MAC Addr     : 0
Host MAC Addr      : 0                        Intf MAC Addr     : 0
SPB MAC Addr       : 0                        Cond MAC Addr     : 0
BGP EVPN Addr      : 0                        EVPN Static Addr  : 0
Admin MTU          : 1518                     Oper MTU          : 1518
Ingr IP Fltr-Id    : n/a                      Egr IP Fltr-Id    : n/a
Ingr Mac Fltr-Id   : n/a                      Egr Mac Fltr-Id   : n/a
Ingr IPv6 Fltr-Id  : n/a                      Egr IPv6 Fltr-Id  : n/a
tod-suite          : None                     qinq-pbit-marking : both
                                              Egr Agg Rate Limit: max
Q Frame-Based Acct : Disabled                 Limit Unused BW   : Disabled
ARP Reply Agent    : Disabled                 Host Conn Verify  : Disabled
Mac Learning       : Enabled                  Discard Unkwn Srce: Disabled
Mac Aging          : Enabled                  Mac Pinning       : Disabled
BPDU Translation   : Disabled
L2PT Termination   : Disabled
Vlan-translation   : None
 
Acct. Pol          : None                     Collect Stats     : Disabled
 
Anti Spoofing      : None                     Dynamic Hosts     : Enabled
Avl Static Hosts   : 0                        Tot Static Hosts  : 0
Calling-Station-Id : n/a
 
Application Profile: None
Transit Policy     : None
 
Oper Group         : (none)                   Monitor Oper Grp  : (none)
Host Lockout Plcy  : n/a
Lag Link Map Prof  : (none)
Cflowd             : Disabled
MCAC Policy Name   :                          MCAC Const Adm St : Enable
MCAC Max Unconst BW: no limit                 MCAC Max Mand BW  : no limit
MCAC In use Mand BW: 0                        MCAC Avail Mand BW: unlimited
MCAC In use Opnl BW: 0                        MCAC Avail Opnl BW: unlimited
Use LAG port weight: no
Restr MacProt Src  : Disabled                 Restr MacUnpr Dst : Disabled
Auto Learn Mac Prot: Disabled                 RestProtSrcMacAct : Disable
Time to RetryReset : never                    Retries Left      : 3
Mac Move           : Blockable                Blockable Level   : Tertiary
Egr MCast Grp      :
Auth Policy        : None
 
-------------------------------------------------------------------------------
ETH-CFM SAP specifics
-------------------------------------------------------------------------------
Tunnel Faults      : n/a                      AIS               : Disabled
MC Prop-Hold-Timer : n/a                      V-MEP Filtering   : Disabled
Squelch Levels     : None
 
-------------------------------------------------------------------------------
Stp Service Access Point specifics
-------------------------------------------------------------------------------
Stp Admin State    : Up                       Stp Oper State    : Down
Core Connectivity  : Down
Port Role          : N/A                      Port State        : Forwarding
Port Number        : N/A                      Port Priority     : 128
Port Path Cost     : 10                       Auto Edge         : Enabled
Admin Edge         : Disabled                 Oper Edge         : N/A
Link Type          : Pt-pt                    BPDU Encap        : Dot1d
Root Guard         : Disabled                 Active Protocol   : N/A
Last BPDU from     : N/A
CIST Desig Bridge  : N/A                      Designated Port   : N/A
 
Forward transitions: 0                        Bad BPDUs rcvd    : 0
Cfg BPDUs rcvd     : 0                        Cfg BPDUs tx      : 0
TCN BPDUs rcvd     : 0                        TCN BPDUs tx      : 0
TC bit BPDUs rcvd  : 0                        TC bit BPDUs tx   : 0
RST BPDUs rcvd     : 0                        RST BPDUs tx      : 0
MST BPDUs rcvd     : 0                        MST BPDUs tx      : 0
-------------------------------------------------------------------------------
ARP host
-------------------------------------------------------------------------------
Admin State        : outOfService
Host Limit         : 1                        Min Auth Interval : 15 minutes
 
-------------------------------------------------------------------------------
QOS
-------------------------------------------------------------------------------
Ingress qos-policy : 1                        Egress qos-policy : 30
Ingress FP QGrp    : (none)                   Egress Port QGrp  : (none)
Ing FP QGrp Inst   : (none)                   Egr Port QGrp Inst: (none)
Shared Q plcy      : n/a                      Multipoint shared : Disabled
I. Sched Pol       : (Not Specified)
E. Sched Pol       : test2
I. Policer Ctl Pol : (Not Specified)
E. Policer Ctl Pol : (Not Specified)
-------------------------------------------------------------------------------
DHCP
-------------------------------------------------------------------------------
Description        : (Not Specified)
Admin State        : Down                     Lease Populate    : 0
DHCP Snooping      : Down                     Action            : Keep
 
Proxy Admin State  : Down
Proxy Lease Time   : N/A
Emul. Server Addr  : Not Configured
-------------------------------------------------------------------------------
Subscriber Management
-------------------------------------------------------------------------------
Admin State        : Down                     MAC DA Hashing    : False
Def Sub-Id         : None
Def Sub-Profile    : None
Def SLA-Profile    : None
Def Inter-Dest-Id  : None
Def App-Profile    : None
Sub-Ident-Policy   : None
 
Subscriber Limit   : 1
Single-Sub-Parameters
 Prof Traffic Only : False
 Non-Sub-Traffic   : N/A
-------------------------------------------------------------------------------
Sap Statistics
-------------------------------------------------------------------------------
Last Cleared Time     : N/A
 
                        Packets                 Octets
CPM Ingress           : 0                       0
 
Forwarding Engine Stats
Dropped               : 0                       0
Off. HiPrio           : 0                       0
Off. LowPrio          : 0                       0
Off. Uncolor          : 0                       0
Off. Managed          : 0                       0
 
Queueing Stats(Ingress QoS Policy 1)
Dro. HiPrio           : 0                       0
Dro. LowPrio          : 0                       0
For. InProf           : 0                       0
For. OutProf          : 0                       0
 
Queueing Stats(Egress QoS Policy 30)
Dro. InProf           : 0                       0
Dro. OutProf          : 0                       0
For. InProf           : 0                       0
For. OutProf          : 0                       0
-------------------------------------------------------------------------------
Sap per Queue stats
-------------------------------------------------------------------------------
                        Packets                 Octets
 
Ingress Queue 1 (Unicast) (Priority)
Off. HiPrio           : 0                       0
Off. LowPrio          : 0                       0
Dro. HiPrio           : 0                       0
Dro. LowPrio          : 0                       0
For. InProf           : 0                       0
For. OutProf          : 0                       0
 
Ingress Queue 11 (Multipoint) (Priority)
Off. HiPrio           : 0                       0
Off. LowPrio          : 0                       0
Off. Managed          : 0                       0
Dro. HiPrio           : 0                       0
Dro. LowPrio          : 0                       0
For. InProf           : 0                       0
For. OutProf          : 0                       0
 
Egress Queue 1
For. InProf           : 0                       0
For. OutProf          : 0                       0
Dro. InProf           : 0                       0
Dro. OutProf          : 0                       0
===============================================================================
*A:PE#
 
sdp
Syntax
sdp [{sdp-id | far-end ip-address }] [detail]]
Context
show>service>id
Description
Displays information for the SDPs associated with the service.
If no optional parameters are specified, a summary of all associated SDPs is displayed.
Parameters
sdp-id
The SDP ID for which to display information.
Values
far-end ip-address
When specified, displays SDP having the specified far-end IP address.
detail
Displays detailed information for the SDP.
Sample Output
A:Dut-A# show service id 1 sdp detail 
===============================================================================
Services: Service Destination Points Details 
===============================================================================
 Sdp Id 1:1  -(10.20.1.2)  
-------------------------------------------------------------------------------
Description     : Default sdp description
SDP Id             : 1:1                      Type              : Spoke        
VC Type            : Ether                    VC Tag            : n/a          
Admin Path MTU     : 0                        Oper Path MTU     : 9186         
Far End            : 10.20.1.2                Delivery          : MPLS         
 
Admin State        : Up                       Oper State        : Up           
Acct. Pol          : None                     Collect Stats     : Disabled     
Ingress Label      : 2048                     Egress Label      : 2048         
Ing mac Fltr       : n/a                      Egr mac Fltr      : n/a          
Ing ip Fltr        : n/a                      Egr ip Fltr       : n/a          
Ing ipv6 Fltr      : n/a                      Egr ipv6 Fltr     : n/a          
Admin ControlWord  : Not Preferred            Oper ControlWord  : False        
Last Status Change : 05/31/2007 00:45:43      Signaling         : None         
Last Mgmt Change   : 05/31/2007 00:45:43                                       
Class Fwding State : Up                                                        
Flags              : None
Peer Pw Bits       : None
Peer Fault Ip      : None                                                      
Peer Vccv CV Bits  : None
Peer Vccv CC Bits  : None
Max Nbr of MAC Addr: No Limit                 Total MAC Addr    : 0            
Learned MAC Addr   : 0                        Static MAC Addr   : 0            
 
MAC Learning       : Enabled                  Discard Unkwn Srce: Disabled     
MAC Aging          : Enabled                                                   
L2PT Termination   : Disabled                 BPDU Translation  : Disabled     
MAC Pinning        : Disabled                                                  
 
KeepAlive Information :
Admin State        : Disabled                 Oper State        : Disabled     
Hello Time         : 10                       Hello Msg Len     : 0            
Max Drop Count     : 3                        Hold Down Time    : 10           
 
Statistics            :
I. Fwd. Pkts.      : 0                        I. Dro. Pkts.     : 0            
I. Fwd. Octs.      : 0                        I. Dro. Octs.     : 0            
E. Fwd. Pkts.      : 0                        E. Fwd. Octets    : 0            
MCAC Policy Name   :                                                           
MCAC Max Unconst BW: no limit                 MCAC Max Mand BW  : no limit     
MCAC In use Mand BW: 0                        MCAC Avail Mand BW: unlimited    
MCAC In use Opnl BW: 0                        MCAC Avail Opnl BW: unlimited    
 
Associated LSP LIST :
Lsp Name           : A_B_1                                                     
Admin State        : Up                       Oper State        : Up           
Time Since Last Tr*: 00h26m35s                                                 
 
Lsp Name           : A_B_2                                                     
Admin State        : Up                       Oper State        : Up           
Time Since Last Tr*: 00h26m35s                                                 
 
Lsp Name           : A_B_3                                                     
Admin State        : Up                       Oper State        : Up           
Time Since Last Tr*: 00h26m34s                                                 
 
Lsp Name           : A_B_4                                                     
Admin State        : Up                       Oper State        : Up           
Time Since Last Tr*: 00h26m34s                                                 
 
Lsp Name           : A_B_5                                                     
Admin State        : Up                       Oper State        : Up           
Time Since Last Tr*: 00h26m34s                                                 
 
Lsp Name           : A_B_6                                                     
Admin State        : Up                       Oper State        : Up           
Time Since Last Tr*: 00h26m34s                                                 
 
Lsp Name           : A_B_7                                                     
Admin State        : Up                       Oper State        : Up           
Time Since Last Tr*: 00h26m34s                                                 
 
Lsp Name           : A_B_8                                                     
Admin State        : Up                       Oper State        : Up           
Time Since Last Tr*: 00h26m35s                                                 
 
Lsp Name           : A_B_9                                                     
Admin State        : Up                       Oper State        : Up           
Time Since Last Tr*: 00h26m34s                                                 
 
Lsp Name           : A_B_10                                                    
Admin State        : Up                       Oper State        : Up           
Time Since Last Tr*: 00h26m34s 
-------------------------------------------------------------------------------
Class-based forwarding :
-------------------------------------------------------------------------------
Class forwarding   : enabled                                                   
Default LSP        : A_B_10                   Multicast LSP     : A_B_9 
===============================================================================
FC Mapping Table
===============================================================================
FC Name             LSP Name                                                   
-------------------------------------------------------------------------------
af                  A_B_3                                                      
be                  A_B_1                                                      
ef                  A_B_6                                                      
h1                  A_B_7                                                      
h2                  A_B_5                                                      
l1                  A_B_4                                                      
l2                  A_B_2                                                      
nc                  A_B_8                                                      
===============================================================================
Stp Service Destination Point specifics
-------------------------------------------------------------------------------
Mac Move           : Blockable                                                 
Stp Admin State    : Up                       Stp Oper State    : Down         
Core Connectivity  : Down                                                      
Port Role          : N/A                      Port State        : Forwarding   
Port Number        : 2049                     Port Priority     : 128          
Port Path Cost     : 10                       Auto Edge         : Enabled      
Admin Edge         : Disabled                 Oper Edge         : N/A          
Link Type          : Pt-pt                    BPDU Encap        : Dot1d        
Root Guard         : Disabled                 Active Protocol   : N/A          
Last BPDU from     : N/A                                                       
Designated Bridge  : N/A                      Designated Port Id: 0            
 
Fwd Transitions    : 0                        Bad BPDUs rcvd    : 0            
Cfg BPDUs rcvd     : 0                        Cfg BPDUs tx      : 0            
TCN BPDUs rcvd     : 0                        TCN BPDUs tx      : 0            
RST BPDUs rcvd     : 0                        RST BPDUs tx      : 0            
-------------------------------------------------------------------------------
Number of SDPs : 1
-------------------------------------------------------------------------------
* indicates that the corresponding row element may have been truncated.
-------------------------------------------------------------------------------
A:Dut-A# 
subscriber-hosts
Syntax
subscriber-hosts [sap sap-id] [ip ip-address[/mask]] [mac ieee-address] [sub-profile sub-profile-name] [sla-profile sla-profile-name] [detail]
Context
show>service>id
Description
Displays subscriber host information.
Parameters
sap sap-id
Displays the specified subscriber host SAP information. See Common CLI Command Descriptions for command syntax.
ip-address/mask
The IP address of the IP interface. The ip-address portion of the address command specifies the IP host address that will be used by the IP interface within the subnet. This address must be unique within the subnet and specified in dotted decimal notation.
Values
ieee-address
Specifies the 48-bit MAC address for the static ARP in the form aa:bb:cc:dd:ee:ff or aa-bb-cc-dd-ee-ff where aa, bb, cc, dd, ee, and ff are hexadecimal numbers. Allowed values are any non-broadcast, non-multicast MAC and non-IEEE reserved MAC addresses.
sub-profile sub-profile-name
Specifies an existing subscriber profile name to be associated with the static subscriber host. The subscriber profile is configured in the config>subscr-mgmt>sub-profile context.
sla-profile sla-profile-name
Specifies an existing SLA profile name to be associated with the static subscriber host. The SLA profile is configured in the config>subscr-mgmt>sla-profile context.
detail
Displays detailed information.
statistics
Syntax
statistics [ip-int-name | ip-address]
Context
show>router>dhcp
Description
Display statistics for DHCP relay and DHCP snooping. If no IP address or interface name is specified, then all configured interfaces are displayed. If an IP address or interface name is specified, then only data regarding the specified interface is displayed.
Parameters
ip-int-name | ip-address
Displays statistics for the specified IP interface.
Output
Show DHCP Statistics Output
The following table describes the output fields for DHCP.i
Sample Output
*A:ALA-1# show router dhcp statistics
================================================================
DHCP Global Statistics
================================================================
Rx Packets                        : 0
Tx Packets                        : 0
Rx Malformed Packets              : 0
Rx Untrusted Packets              : 0
Client Packets Discarded          : 0
Client Packets Relayed            : 0
Client Packets Snooped            : 0
Server Packets Discarded          : 0
Server Packets Relayed            : 0
Server Packets Snooped            : 0
================================================================
*A:ALA-1#
summary
Syntax
summary
Context
show>router>dhcp
Description
This command displays the status of the DHCP relay and DHCP snooping functions on each interface.
Output
Show DHCP Summary Output
The following table describes the output fields for DHCP summary.
Sample Output
A:ALA-49# show router dhcp summary
===============================================================================
DHCP Summary (Router: Base)
===============================================================================
Interface Name                   Arp      Used/                 Info    Admin
  SapId/Sdp                      Populate Provided              Option  State
-------------------------------------------------------------------------------
Sector A                         No       0/0                   Keep    Up
  sap:7/1/1.2.2                           0/0
grp-if                           No       0/1                   Keep    Down
ies-test                         No       0/0                   Keep    Up
  sap:9/1/2:0/500                         0/0
test                             No       0/0                   Keep    Up
  sap:10/1/2:0                            0/0
test1                            No       0/0                   Keep    Up
  sap:7/1/1.1.2                           0/0
test2                            No       0/0                   Keep    Up
  sap:7/1/1.2.1                           0/0
testA                            No       0/0                   Keep    Up
  sap:7/1/3.1.1                           0/0
testB                            No       0/0                   Keep    Up
  sap:7/1/5.1.1                           0/0
to-HQ                            No       0/0                   Keep    Up
  sdp:spoke-2:1001                        0/0
to-web                           No       0/0                   Keep    Up
  sap:2/1/10:50                           0/0
-------------------------------------------------------------------------------
Interfaces: 9
vrrp
Syntax
vrrp
Context
show>router
Description
This command displays information VRRP instances.
instance
Syntax
instance
instance interface interface-name [vrid virtual-router-id]
instance interface interface-name vrid virtual-router-id ipv6
Context
show>router>vrrp
Description
This command displays statistics for the VRRP instance.
Parameters
interface-name
Displays statistics for the specified interface.
virtual-router-id
Displays statistics for the specified virtual router ID.
Values
statistics
Syntax
statistics
Context
show>router>vrrp
Description
This command displays statistics for the VRRP instance.
retailers
Syntax
retailers
Context
show>service>id
Description
This command displays the service ID of the retailer subscriber service to which this DHCP lease belongs.
wholesalers
Syntax
wholesalers
Context
show>service>id
Description
This command displays service wholesaler information.
 
IES Clear Commands
dhcp
Syntax
dhcp
Context
clear>router>dhcp
clear>service>id
Description
This command enables the context to clear DHCP parameters.
dhcp6
Syntax
dhcp6
Context
clear>router>dhcp6
clear>service>id
Description
This command enables the context to clear DHCPv6 parameters.
statistics
Syntax
statistics [ip-int-name | ip-address]
Context
clear>router>dhcp
Description
Clears DHCP statistics.
id
Syntax
id service-id
Context
clear>service
clear>service>statistics
Description
This command clears parameters for a specific service.
Parameters
service-id
The ID that uniquely identifies the service to clear.
arp-host
Syntax
arp-host
arp-host { mac ieee-address | sap sap-id | ip-address ip-address[/mask] }
arp-host [port port-id] [inter-dest-id intermediate-destination-id | no-inter-dest-id]
arp-host statistics [sap sap-id | interface interface-name]
Context
clear>service>id
Description
This command clears ARP host data.
interface
Syntax
interface [ip-int-name | ip-addr] [icmp]
Context
clear>router
Description
This command clears IP interface statistics.
If no IP interface is specified either by IP interface name or IP address, the command will perform the clear operation on all IP interfaces.
Parameters
ip-int-name | ip-addr
The IP interface name or IP interface address.
Default
icmp
Specifies to reset the ICMP statistics for the IP interface(s) used for ICMP rate limit.
interface
Syntax
interface interface-name [vrid virtual-router-id]
interface interface-name vrid vritual-router-id ipv6
Context
clear>router>vrrp
Description
This command clears and resets VRRP instances.
Parameters
interface-name
Specifies an existing interface name up to 32 characters in length.
virtual-router-id
Specifies the virtual router identifier.
Values
statistics
Syntax
statistics interface interface-name [vrid virtual-router-id]
statistics
statistics interface interface-name vrid virtual-router-id ipv6
Context
clear>router>vrrp
Description
This command clears statistics for VRRP instances.
Parameters
interface-name
Specifies an existing interface name up to 32 characters in length.
virtual-router-id
Specifies the virtual router identifier.
Values
fdb
Syntax
fdb {all | mac ieee-address | sap sap-id] | mesh-sdp sdp-id[:vc-id] | spoke-sdp sdp-id:vc-id}
Context
clear>service>id
Description
This command clears FDB entries for the service.
Parameters
all
Clears all FDB entries.
mac ieee-address
Clears only FDB entries in the FDB table with the specified 48-bit MAC address. The MAC address can be expressed in the form aa:bb:cc:dd:ee:ff or aa-bb-cc-dd-ee-ff where aa, bb, cc, dd, ee and ff are hexadecimal numbers.
sap sap-id
Clears the specified SAP information. See Common CLI Command Descriptions for command syntax.
mesh-sdp
Clears only service FDB entries associated with the specified mesh SDP ID. For a mesh SDP, the VC ID is optional.
spoke-sdp
Clears only service FDB entries associated with the specified spoke SDP ID. For a spoke SDP, the VC ID must be specified.
sdp-id
The SDP ID for which to clear associated FDB entries.
Values
vc-id
The virtual circuit ID on the SDP ID for which to clear associated FDB entries.
Default
Values
site
Syntax
site service-id
Context
clear>service>id
Description
This command clears site-specific information for the service.
Parameters
service-id
Specifies the service ID or service name up to 64 characters in length.
Values
spoke-sdp
Syntax
spoke-sdp sdp-id:vc-id ingress-vc-label
Context
clear>service>id
Description
Clears and resets the spoke SDP bindings for the service.
Parameters
sdp-id
The spoke SDP ID to be reset.
Values
vc-id
The virtual circuit ID on the SDP ID to be reset.
Values
stp
Syntax
stp
Context
clear>service>statistics>id
Description
Clears all spanning tree statistics for the service ID.
lease-state
Syntax
lease-state
lease-state ip-address ip-address
lease-state mac ieee-address
lease-state sap sap-id
lease-state sdp sdp-id:vc-id
Context
clear>service>id>dhcp
Description
Clears DHCP lease state information for this service.
Parameters
ip-address
The IP address of the IP interface. The ip-address portion of the address command specifies the IP host address that will be used by the IP interface within the subnet. This address must be unique within the subnet and specified in dotted decimal notation. Allowed values are IP addresses in the range 1.0.0.0 – 223.255.255.255 (with support of /31 subnets).
ieee-address
Specifies the 48-bit MAC address for the static ARP in the form aa:bb:cc:dd:ee:ff or aa-bb-cc-dd-ee-ff where aa, bb, cc, dd, ee, and ff are hexadecimal numbers. Allowed values are any non-broadcast, non-multicast MAC and non-IEEE reserved MAC addresses.
sap sap-id
Clears the specified lease state SAP information. See Common CLI Command Descriptions for command syntax.
sdp-id
The specified SDP to be cleared.
Values
vc-id
The virtual circuit ID on the SDP ID to be cleared.
Values
lease-state
Syntax
lease-state [ip-address ipv6-address/prefix-length] [mac ieee-address]
Context
clear>service>id>dhcp6
Description
This command clears DHCPv6 lease state information for this service.
Parameters
ip-address ipv6-address/prefix-length
The IP address of the IP interface. The ip-address portion of the address command specifies the IP host address that will be used by the IP interface within the subnet. This address must be unique within the subnet and specified in dotted decimal notation. Allowed values are IP addresses in the range 1.0.0.0 – 223.255.255.255 (with support of /31 subnets).
Values
mac ieee-address
Specifies the 48-bit MAC address for the static ARP in the form aa:bb:cc:dd:ee:ff or aa-bb-cc-dd-ee-ff where aa, bb, cc, dd, ee, and ff are hexadecimal numbers. Allowed values are any non-broadcast, non-multicast MAC and non-IEEE reserved MAC addresses.
statistics
Syntax
statistics [ip-int-name | ipv6-address]
Context
clear>router>dhcp6
Description
This command clears DHCP6 statistics.
Parameters
ip-int-name
Specifies the IP interface name up to 32 characters inlength.
ip-address ipv6-address/prefix-length
The IP address of the IP interface. The ip-address portion of the address command specifies the IP host address that will be used by the IP interface within the subnet. This address must be unique within the subnet and specified in dotted decimal notation. Allowed values are IP addresses in the range 1.0.0.0 – 223.255.255.255 (with support of /31 subnets).
Values
statistics
Syntax
statistics [sap sap-id | sdp sdp-id:vc-id | interface ip-address | ip-int-name]
Context
clear>service>id>dhcp
Description
This command clears DHCP statistics.
Parameters
sap sap-id
Clears the specified SAP information. See Common CLI Command Descriptions for command syntax.
sdp sdp-id
The specified SDP to be cleared.
Values
vc-id
The virtual circuit ID on the SDP ID to be cleared.
Values
interface ip-address
The interface IP address.
ip-int-name
The interface name.
 
IES Debug Commands
host-connectivity-verify
Syntax
[no] host-connectivity-verify
Context
debug>service>id
Description
This command enables Subscriber Host Connectivity Verification (SHCV) debugging.
The no form of the command disables the SHCV debugging.
ip
Syntax
[no] ip ip-address
Context
debug>service>id>host-connectivity-verify
Description
This command displays Subscriber Host Connectivity Verification (SHCV) events for a particular IP address.
Parameters
ip-address
The IP address of the IP interface. The ip-address portion of the address command specifies the IP host address that will be used by the IP interface within the subnet. This address must be unique within the subnet and specified in dotted decimal notation. Allowed values are IP addresses in the range 1.0.0.0 – 223.255.255.255 (with support of /31 subnets).
mac
Syntax
[no] mac ieee-address
Context
debug>service>id>host-connectivity-verify
Description
This command displays Subscriber Host Connectivity Verification (SHCV) events for a particular MAC address.
Parameters
mac-address
Specifies the 48-bit MAC address for the static ARP in the form aa:bb:cc:dd:ee:ff or aa-bb-cc-dd-ee-ff where aa, bb, cc, dd, ee, and ff are hexadecimal numbers. Allowed values are any non-broadcast, non-multicast MAC and non-IEEE reserved MAC addresses.
sap
Syntax
[no] sap sap-id
Context
debug>service>id>host-connectivity-verify
Description
This command displays Subscriber Host Connectivity Verification (SHCV) events for a particular SAP.
Parameters
sap-id
Specifies the physical port identifier portion of the SAP definition. See Common CLI Command Descriptions for command syntax.
packets
Syntax
[no] packets
[no] packets interface ip-int-name [vrid virtual-router-id]
[no] packets interface ip-int-name vrid virtual-router-id ipv6
Context
debug>router>vrrp
Description
This command enables or disables debugging for VRRP packets.
Parameters
ip-int-name
Specifies the interface name.
virtual-router-id
Specifies the router ID.
Values
events
Syntax
[no] events
[no] events interface ip-int-name [vrid virtual-router-id]
[no] events interface ip-int-name vrid virtual-router-id ipv6
Context
debug>router>vrrp
Description
This command enables or disables debugging for VRRP events.
Parameters
ip-int-name
Specifies the interface name.
virtual-router-id
Specifies the router ID.
Values
instance
Syntax
instance interface interface-name vr-id virtual-router-id [ipv6] [interval seconds] [repeat repeat] [absolute|rate]
Context
monitor>router>vrrp
Description
This command enables monitoring for statistics for VRRP instances.