Services are created in the administratively down (shutdown) state. When a
no shutdown command is entered, the service becomes administratively up and then tries to enter the operationally up state. Default administrative states for services and service entities is described below in Special Cases.
The no form of this command places the entity into an administratively enabled state.
The description command associates a text string with a configuration context to help identify the content in the configuration file.
The no form of this command removes the string from the configuration.
vpls service-id customer
customer-id vpn vpn-id [m-vpls
]
The vpls command is used to create or maintain a VPLS service. If the
service-id does not exist, a context for the service is created. If the
service-id exists, the context for editing the service is entered.
When a service is created, the create keyword must be specified if the
create command is enabled in the
environment context.
When a service is created, the customer keyword and
customer-id must be specified and associates the service with a customer. The
customer-id must already exist having been created using the
customer command in the service context. Once a service has been created with a customer association, it is not possible to edit the customer association. The service must be deleted and recreated with a new customer association.
To create a management VPLS, the m-vpls keyword must be specified. See section Hierarchical VPLS Redundancy for an introduction to the concept of management VPLS.
Once a service is created, the use of the customer customer-id is optional for navigating into the service configuration context. Attempting to edit a service with the incorrect
customer-id specified will result in an error.
The no form of this command deletes the VPLS service instance with the specified
service-id. The service cannot be deleted until all SAPs and SDPs defined within the service ID have been shutdown and deleted, and the service has been shutdown.
ies service-id customer
customer-id vpn
vpn-id
The ies command is used to create or maintain an Internet Ethernet Service (IES). If the
service-id does not exist, a context for the service is created. If the
service-id exists, the context for editing the service is entered.
When a service is created, the customer keyword and
customer-id must be specified and associates the service with a customer. The
customer-id must already exist having been created using the
customer command in the service context. Once a service has been created with a customer association, it is not possible to edit the customer association. The service must be deleted and recreated with a new customer association.
Once a service is created, the use of the customer customer-id is optional for navigating into the service configuration context. Attempting to edit a service with the incorrect
customer-id specified will result in an error.
The no form of this command deletes the IES service instance with the specified
service-id. The service cannot be deleted until all the IP interfaces defined within the service ID have been shutdown and deleted.
vprn service-id [customer
customer-id]
If the service-id does not exist, a context for the service is created. If the
service-id exists, the context for editing the service is entered.
When a service is created, the customer keyword and
customer-id must be specified and associates the service with a customer. The
customer-id must already exist having been created using the customer command in the service context. When a service is created with a customer association, it is not possible to edit the customer association. The service must be deleted and re-created with a new customer association.
When a service is created, the use of the customer customer-id is optional to navigate into the service configuration context. If attempting to edit a service with the incorrect
customer-id results in an error.
The no form of the command deletes the VPRN service instance with the specified
service-id. The service cannot be deleted until all the IP interfaces and all routing protocol configurations defined within the service ID have been shutdown and deleted.
|
Values
|
service-id: 1 — 2147483648 svc-name: 64 characters maximum
|
config>service>vprn>subscriber-interface>sap
All SAPs must be explicitly created. If no SAPs are created within a service or on an IP interface, a SAP will not exist on that object.
Enter an existing SAP without the create keyword to edit SAP parameters. The SAP is owned by the service in which it was created.
A SAP can only be associated with a single service. A SAP can only be defined on a port that has been configured as an access port using the
config interface port-type port-id mode access command. Channelized TDM ports are always access ports.
If a port is shutdown, all SAPs on that port become operationally down. When a service is shutdown, SAPs for the service are not displayed as operationally down although all traffic traversing the service will be discarded. The operational state of a SAP is relative to the operational state of the port on which the SAP is defined.
The no form of this command deletes the SAP with the specified port. When a SAP is deleted, all configuration parameters for the SAP will also be deleted.
The port-id must reference a valid port type. When the
port-id parameter represents SONET/SDH and TDM channels the port ID must include the channel ID. A period “.” separates the physical port from the
channel-id. The port must be configured as an access port.
When no disable-aging is specified for a VPLS, it is possible to disable aging for specifc SAPs and/or spoke SDPs by entering the
disable-aging command at the appropriate level.
When the disable-aging command is entered at the VPLS level, the
disable-aging state of individual SAPs or SDPs will be ignored.
The no form of this command enables aging on the VPLS service.
When disable-learning is enabled, new source MAC addresses will not be entered in the VPLS service forwarding database. This is true for both local and remote MAC addresses.
The no form of this command enables learning of MAC addresses meaning that normal MAC learning is enabled.
The no form of this command allows flooding of packets with unknown destination MAC addresses in the VPLS.
[no
] fdb-table-high-wmark
high-water-mark
This command specifies the value to send logs and traps when the threshold is reached.
[no
] fdb-table-low-wmark
low-water-mark
This command specifies the value to send logs and traps when the threshold is reached.
The fdb-table-size specifies the maximum number of forwarding database entries for both learned and static MAC addresses for the VPLS instance.
The no form of this command returns the maxium FDB table size to default.
250 — Forwarding table of 250 MAC entries.
The no form of this command returns the local aging timer to the default value.
local age 300 — Local MACs aged after 300 seconds.
The no form of this command returns the remote aging timer to the default value.
remote age 900 — Remote MACs aged after 900 seconds.
The service-mtu defines the payload capabilities of the service. It is used by the system to validate the SAP and SDP binding’s operational state within the service.
The no form of this command returns the default
service-mtu for the indicated service type to the default value.
[no
] split-horizon-group
[group-name] [residential-group]
The no form of the command removes the group name from the configuration.
sap sap-id [split-horizon-group
group-name] [create
] [capture-sap]
Enter an existing SAP without the create keyword to edit SAP parameters. The SAP is owned by the service in which it was created.
The no form of this command deletes the SAP with the specified port. When a SAP is deleted, all configuration parameters for the SAP will also be deleted. For Internet Ethernet Service (IES), the IP interface must be shutdown before the SAP on that interface may be removed.
A VPLS SAP can be defined with Ethernet ports, SONET/SDH or TDM channels.
The port-id must reference a valid port type. When the
port-id parameter represents SONET/SDH and TDM channels, the port ID must include the channel ID. A period “.” separates the physical port from the
channel-id. The port must be configured as an access port.
The no form of this command removes the accounting policy association from the SAP or SDP, and the acccounting policy reverts to the default.
When the no collect-stats command is issued the statistics are still accumulated by the IOM cards. However, the CPU will not obtain the results and write them to the billing file. If a subsequent
collect-stats command is issued then the counters written to the billing file include all the traffic while the
no collect-stats command was in effect.
This command enables cflowd to collect traffic flow samples through a router for analysis.
cflowd is used for network planning and traffic engineering, capacity planning, security, application and user profiling, performance monitoring, usage-based billing, and SLA measurement. When
cflowd is enabled at the interface level, all packets forwarded by the interface are subjected to analysis according to the
cflowd configuration.
cflowd configuration associated with a filter.
cflowd configuration associated with an IP interface.
This command indicates whether or not the mac-move agent, when enabled using config>service>vpls>mac-move or
config>service>epipe>mac-move, will limit the MAC re-learn (move) rate on this SAP.
The age of the MAC address entry in the FIB is set by the age timer. If mac-aging is disabled on a given VPLS service, any MAC address learned on a SAP/SDP with
mac-pinning enabled will remain in the FIB on this SAP/SDP forever.
|
Values
|
aal5snap-routed — Routed encapsulation for LLC encapsulated circuit (LLC/SNAP precedes protocol datagram) as defined in RFC 2684. aal5mux-ip — Routed IP encapsulation for VC multiplexed circuit as defined in RFC 2684
|
The no form of the command reverts the traffic descriptor to the default traffic descriptor profile.
The no form of the command removes the default SLA profile from the SAP configuration.
The no form of the command removes the default SLA profile from the SAP configuration.
The no form of the command removes the default subscriber identifcation policy from the SAP configuration.
|
•
|
For VPLS SAPs with arp-reply-agent enabled with the optional sub-ident parameter, the static subscriber host’s sub-ident-string is used to determine whether an ARP request received on the SAP is sourced from a host belonging to the same subscriber as the destination host. When both the destination and source hosts from the ARP request are known on the SAP and the subscriber identifications do not match, the ARP request may be forwarded to the rest of the destinations.
|
If sub-ident is not enabled on the SAP arp-reply-agent, subscriber identification matching is not performed on ARP requests received on the SAP.
ARP requests are never forwarded back to the same SAP or within the receiving SAP’s Split Horizon Group.
[no
] profiled-traffic-only
The no form of the command disables the command.
The no form of the command removes removes the profiles and disables the feature.
|
•
|
For SAPs with arp-reply-agent enabled with the optional sub-ident parameter, the static subscriber host’s sub-ident-string is used to determine whether an ARP request received on the SAP is sourced from a host belonging to the same subscriber as the destination host. When both the destination and source hosts from the ARP request are known on the SAP and the subscriber identifications do not match, the ARP request may be forwarded to the rest of the destinations.
|
If sub-ident is not enabled on the SAP arp-reply-agent, subscriber identification matching is not performed on ARP requests received on the SAP.
[no
] profiled-traffic-only
The no form of the command disables the command.
When IGMP fast leave processing is enabled, the SR-Series will immediately remove a SAP or SDP from the IP multicast group when it detects an IGMP 'leave' on that SAP or SDP. Fast leave processing allows the switch to remove a SAP or SDP that sends a 'leave' from the forwarding table without first sending out group-specific queries to the SAP or SDP, and thus speeds up the process of changing channels ('zapping').
The no form of the command removes the MVR policy association from the VPLS.
The no form of the command removes the policy association from the SAP or SDP.
This command defines the maximum number of multicast groups that can be joined on this SAP or SDP. If the SR-Series receives an IGMP join message that would exceed the configured number of groups, the request is ignored.
This command configures the bandwidth for the interface's multicast CAC policy traffic. When disabled (no unconstrained-bw) there will be no checking of bandwidth constraints on the interface level. When enabled and a policy is defined, enforcement is performed. The allocated bandwidth for optional channels should not exceed the
unconstrained-bw minus the
mandatory-bw and the mandatory channels have to stay below the specified value for the
mandatory-bw. After this interface check, the bundle checks are performed.
If the bandwidth value is 0, no mandatory channels are allowed. If
bandwith is not configured, then all mandatory and optional channels are allowed.
If the value of mandatory-bw is equal to the value of
bandwidth, then all the unconstrained bandwidth on a given interface is allocated to mandatory channels configured through multicast CAC policy on that interface and no optional groups (channels) are allowed.
The value of mandatory-bw should always be less than or equal to that of
bandwidth, An attempt to set the value of
mandatory-bw greater than that of
bandwidth, will result in inconsistent value error.
If the send-queries command is enabled on this SAP or spoke SDP, the
mrouter-port parameter can not be set.
If the send-queries command is enabled, this parameter specifies the interval between two consecutive general queries sent by the system on this SAP or SDP.
If the send-queries command is enabled, this parameter specifies the maximum response time advertised in IGMPv2/v3 queries.
If the send-queries command is enabled, this parameter allows tuning for the expected packet loss on a SAP or SDP. The robust-count variable allows tuning for the expected packet loss on a subnet and is comparable to a retry count. If this SAP or SDP is expected to be 'lossy', this parameter may be increased. IGMP snooping on this SAP or SDP is robust to (robust-count-1) packet losses.
Use the no form of the command to remove the starg entry from the configuration.
The no form of the command disables anti-spoof filtering on the SAP.
The no form of the command returns the value to the default.
The no form of the command returns the value to the default.
ARP replies and requests received on a SAP with arp-reply-agent enabled will be evaluated by the system against the anti-spoof filter entries associated with the ingress SAP (if the SAP has anti-spoof filtering enabled). ARPs from unknown hosts on the SAP will be discarded when anti-spoof filtering is enabled.
Static hosts can be defined on the SAP using the host command. Dynamic hosts are enabled on the system by enabling the
lease-populate command in the SAP’s
dhcp context. In the event that both a static host and a dynamic host share the same IP and MAC address, the VPLS ARP reply agent will retain the host information until both the static and dynamic information are removed. In the event that both a static and dynamic host share the same IP address, but different MAC addresses, the VPLS ARP reply agent is populated with the static host information.
The arp-reply-agent command will fail if an existing static host on the SAP does not have both MAC and IP addresses specified. Once the ARP reply agent is enabled, creating a static host on the SAP without both an IP address and MAC address will fail.
The no form of the command disables ARP-reply-agent functions for static and dynamic hosts on the SAP.
|
•
|
When sub-ident is not configured, the arp-reply-agent does not attempt to identify the subscriber information for the destination or originating host and will not discard an ARP request based on subscriber information.
|
[no
] calling-station-id
{mac
| remote-id
| sap-id
| sap-string
}
host {[ip
ip-address] [mac
mac-address]} [subscriber-sap-id
| subscriber
sub-ident-string] [sub-profile
sub-profile-name] [sla-profile
sla-profile-name] [ancp-string
ancp-string] [inter-dest-id
intermediate-destination-id] [mac-linking
ip-address][rip-policy
rip-policy-name]
no host {[ip
ip-address] [mac
ieee-address]}
Use the no form of the command to remove a static entry from the system. The specified
ip-address and
mac-address must match the host’s exact IP and MAC addresses as defined when it was created. When a static host is removed from the SAP, the corresponding anti-spoof filter entry and/or FDB entry is also removed.
[no
] disable-router-alert-check
The no form of the command disables the router alert check.
The no form of the command removes the values from the configuration.
The no form of the command removes the policy association from the SAP or SDP.
The no form of the command removes the values from the configuration.
The no form of the command removes the value from the configuration.
no filter [ip
ip-filter-id] [mac
mac-filter-id] [ipv6
ipv6-filter-id]
The filter command is used to associate a filter policy with a specified
filter ID with an ingress or egress SAP. The
filter ID must already be defined before the
filter command is executed. If the filter policy does not exist, the operation will fail and an error message returned.
The no form of this command removes any configured filter ID association with the SAP or IP interface. The filter ID itself is not removed from the system unless the scope of the created filter is set to local. To avoid deletion of the filter ID and only break the association with the service object, use
scope command within the filter definition to change the scope to
local or
global. The default scope of a filter is
local.
[no
] limit-unused-bandwidth
[no
] queue-frame-based-accounting
no filter [ip
ip-filter-id] [ipv6
ipv6-filter-id]
This command associates an IP filter policy with an ingress or egress Service Access Point (SAP). Filter policies control the forwarding and dropping of packets based on the matching criteria. MAC filters are only allowed on Epipe and Virtual Private LAN Service (VPLS) SAPs.
The filter command is used to associate a filter policy with a specified
filter ID with an ingress or egress SAP. The
filter policy must already be defined before the
filter command is executed. If the filter policy does not exist, the operation will fail and an error message returned.
The no form of this command removes any configured filter ID association with the SAP. The filter ID itself is not removed from the system unless the scope of the created filter is set to local. To avoid deletion of the filter ID and only break the association with the service object, use
scope command within the filter definition to change the scope to
local or
global. The default scope of a filter is
local.
When enabled (the encapsulation type of the access port where this SAP is defined as qinq), the qinq-mark-top-only command specifies which P-bits to mark during packet egress. When disabled, both set of P-bits are marked. When the enabled, only the P-bits in the top Q-tag are marked.
The no form of the command removes the SAP from any egress multicast group in which it may currently have membership. The SAP will be removed from all efficient multicast replication chains and normal replication will apply to the SAP. A momentary gap in replications to the SAP destination while it is being moved is possible. If the SAP is not currently a member in an egress multicast group, the command has no effect.
The group-name is required when specifying egress multicast group membership on a SAP. An egress multicast group with the specified egress-multicast-group-name must exist and the SAP must pass all common requirements or the command will fail.
The qos command is used to associate both ingress and egress QoS policies. The
qos command only allows ingress policies to be associated on SAP or IP interface ingress and egress policies on SAP or IP interface egress. Attempts to associate a QoS policy of the wrong type returns an error.
The no form of this command removes the QoS policy association from the SAP or IP interface, and the QoS policy reverts to the default.
The no form of the command removes any explicitly defined constraints used to derive the operational CIR and PIR created by the application of the policy. When a specific
adaptation-rule is removed, the default constraints for
rate and
cir apply.
The pir parameter defines the constraints enforced when adapting the PIR rate defined within the
queue queue-id rate command. The
pir parameter requires a qualifier that defines the constraint used when deriving the operational PIR for the queue. When the
rate command is not specified, the default applies.
The max (maximum) option is mutually exclusive with the
min and
closest options. When
max is defined, the operational PIR for the queue will be equal to or less than the administrative rate specified using the
rate command.
The min (minimum) option is mutually exclusive with the
max and
closest options. When
min is defined, the operational PIR for the queue will be equal to or greater than the administrative rate specified using the
rate command.
The closest parameter is mutually exclusive with the
min and
max parameter. When
closest is defined, the operational PIR for the queue will be the rate closest to the rate specified using the
rate command.
The cir parameter defines the constraints enforced when adapting the CIR rate defined within the
queue queue-id rate command. The
cir parameter requires a qualifier that defines the constraint used when deriving the operational CIR for the queue. When the
cir parameter is not specified, the default constraint applies.
The no form of this command restores the average frame overhead parameter for the queue to the default value of 0 percent. When set to 0, the system uses the packet based queue statistics for calculating port scheduler priority bandwidth allocation. If the no avg-frame-overhead command is executed in a queue-override queue id context, the avg-frame-overhead setting for the queue within the sap-egress QoS policy takes effect.
The no form of this command returns the CBS size to the default value.
This command can be used to override specific attributes of the specified queue’s high-prio-only parameters. The high-prio-only command configures the percentage of buffer space for the queue, used exclusively by high priority packets.
The defined high-prio-only value cannot be greater than the MBS size of the queue. Attempting to change the MBS to a value smaller than the high priority reserve will generate an error and fail execution. Attempting to set the
high-prio-only value larger than the current MBS size will also result in an error and fail execution.
The no form of this command restores the default high priority reserved size.
The percent parameter is the percentage reserved for high priority traffic on the queue. If a value of 10KBytes is desired, enter the value 10. A value of 0 specifies that none of the MBS of the queue will be reserved for high priority traffic. This does not affect RED slope operation for packets attempting to be queued.
mbs {size-in-kbytes | default
}
The no form of this command returns the MBS size assigned to the queue.
rate pir-rate [cir
cir-rate]
The CIR can be used by the queue’s parent commands cir-level and
cir-weight parameters to define the amount of bandwidth considered to be committed for the child queue during bandwidth allocation by the parent scheduler.
The rate command can be executed at any time, altering the PIR and CIR rates for all queues created through the association of the SAP egress QoS policy with the
queue-id.
The no form of the command returns all queues created with the
queue-id by association with the QoS policy to the default PIR and CIR parameters (
max, 0).
The max default specifies the amount of bandwidth in kilobits per second (thousand bits per second). The
max value is mutually exclusive to the
pir-rate value.
The cir parameter overrides the default administrative CIR used by the queue. When the
rate command is executed, a CIR setting is optional. When the
rate command has not been executed or the
cir parameter is not explicitly specified, the default CIR (0) is assumed.
Fractional values are not allowed and must be given as a positive integer. The
sum keyword specifies that the CIR be used as the summed CIR values of the children schedulers or queues.
scheduler-policy scheduler-policy-name
The no form of this command removes the configured ingress or egress scheduler policy from the multi-service customer site. When the policy is removed, the schedulers created due to the policy are removed also making them unavailable for the ingress SAP queues associated with the customer site. Queues that lose their parent scheduler association are deemed to be orphaned and are no longer subject to a virtual scheduler. The SAPs that have ingress queues reliant on the removed schedulers enter into an operational state depicting the orphaned status of one or more queues. When the
no scheduler-policy command is executed, the customer site ingress or egress node will not contain an applied scheduler policy.
The scheduler-policy-name parameter applies an existing scheduler policy that was created in the
config>qos>scheduler-policy scheduler-policy-name context to create the hierarchy of ingress or egress virtual schedulers. The scheduler names defined within the policy are created and made available to any ingress or egress queues created on associated SAPs.
[no
] block-on-mesh-failure
The no form of the command restores the global MAC learning limitations for the SAP or spoke SDP.
This command associates the SAP with a customer-site-name. If the specified
customer-site-name does not exist in the context of the service customer ID an error occurs and the command will not execute. If
customer-site-name exists, the current and future defined queues on the SAP (ingress and egress) will attempt to use the scheduler hierarchies created within
customer-site-name as parent schedulers.
This command is mutually exclusive with the SAP ingress and egress scheduler-policy commands. If a
scheduler-policy has been applied to either the ingress or egress nodes on the SAP, the
multi-service-site command will fail without executing. The locally applied scheduler policies must be removed prior to executing the
multi-service-site command.
The no form of the command removes the SAP from any multi-service customer site the SAP belongs to. Removing the site can cause existing or future queues to enter an orphaned state.
static-host ip ip-prefix[/
prefix-length] [
mac ieee-address] [
create]
no static-host ip ip-prefix[/
prefix-length]
mac ieee-address
no static-host ip ip-prefix[/
prefix-length]
ip ip-prefix[/prefix-length
route {ip-prefix/length | ip-prefix netmask} [create
]
no route {ip-prefix/length | ip-prefix netmask} [metric
metric-value]
The no form of the command removes the respective route. Per default, there are no managed-routes configured.
[no
] mac-learning-options
This command configures additional methods by which the BNG will learn the subscriber host MAC.
The no form of the command disables learning of MAC addresses from data packets.
[no
] static-mac
ieee-mac-address
The no form of this command deletes the static MAC entry with the specified MAC address associated with the SDP from the VPLS forwarding database.
mesh-sdp sdp-id[:
vc-id] [
vc-type {
ether |
vlan}]
no mesh-sdp sdp-id[:
vc-id]
The SDP must already be defined in the config>service>sdp context in order to associate the SDP with an Epipe or VPLS service. If the
sdp sdp-id is not already configured, an error message is generated. If the
sdp-id does exist, a binding between that
sdp-id and the service is created.
The no form of this command removes the SDP binding from the service. The SDP configuration is not affected; only the binding of the SDP to a service. Once removed, no packets are forwarded to the far-end router.
No sdp-id is bound to a service.
Several SDPs can be bound to a VPLS. Each SDP must be destined to a different router. If two sdp-id bindings terminate on the same router, an error occurs and the second SDP binding is rejected.
Defines the VC type as Ethernet. The vlan keyword is mutually exclusive. When the VC type is not defined then the default is Ethernet for spoke SDP bindings. Defining Ethernet is the same as executing
no vc-type and restores the default VC type for the spoke SDP binding. (hex 5)
spoke-sdp sdp-id[:
vc-id] [vc-type
{ether
| vlan
}] [split-horizon-group
group-name]
The SDP must already be defined in the config>service>sdp context in order to associate an SDP with a VPLS service. If the
sdp sdp-id is not already configured, an error message is generated. If the
sdp-id does exist, a binding between that
sdp-id and the service is created.
The no form of this command removes the SDP binding from the service. The SDP configuration is not affected; only the binding of the SDP to a service. Once removed, no packets are forwarded to the far-end router.
No sdp-id is bound to a service.
Defines the VC type as Ethernet. The ethernet,
vlan, and
vpls keywords are mutually exclusive. When the VC type is not defined then the default is Ethernet for spoke SDP bindings. Defining Ethernet is the same as executing
no vc-type and restores the default VC type for the spoke SDP binding. (hex 5)
Defines the VC type as VLAN. The ethernet,
vlan, and
vpls keywords are mutually exclusive. When the VC type is not defined then the default is Ethernet for spoke SDP bindings.
The VLAN VC-type requires at least one dot1Q tag within each encapsulated Ethernet packet transmitted to the far end.
The SDP must already be defined in the config>service>sdp context in order to associate an SDP with an IES service. If the
sdp sdp-id is not already configured, an error message is generated. If the
sdp-id does exist, a binding between that
sdp-id and the service is created.
The no form of this command removes the SDP binding from the service. The SDP configuration is not affected; only the binding of the SDP to a service. Once removed, no packets are forwarded to the far-end router. The spoke SDP must be shut down first before it can be deleted from the configuration.
No sdp-id is bound to a service.
[no
] vc-label
egress-vc-label
[no
] vc-label
ingress-vc-label
The no form of this command disables the command
The no form of this command restores the average frame overhead parameter for the queue to the default value of 0 percent. When set to 0, the system uses the packet based queue statistics for calculating port scheduler priority bandwidth allocation. If the no avg-frame-overhead command is executed in a queue-override queue id context, the avg-frame-overhead setting for the queue within the sap-egress QoS policy takes effect.
config>service>vpls>sap>ingress>queue-override
The no form of the command removes any explicitly defined constraints used to derive the operational CIR and PIR created by the application of the policy. When a specific
adaptation-rule is removed, the default constraints for
rate and
cir apply.
The pir parameter defines the constraints enforced when adapting the PIR rate defined within the
queue queue-id rate command. The
pir parameter requires a qualifier that defines the constraint used when deriving the operational PIR for the queue. When the
rate command is not specified, the default applies.
The max (maximum) option is mutually exclusive with the
min and
closest options. When
max is defined, the operational PIR for the queue will be equal to or less than the administrative rate specified using the
rate command.
The min (minimum) option is mutually exclusive with the
max and
closest options. When
min is defined, the operational PIR for the queue will be equal to or greater than the administrative rate specified using the
rate command.
The closest parameter is mutually exclusive with the
min and
max parameter. When
closest is defined, the operational PIR for the queue will be the rate closest to the rate specified using the
rate command.
The cir parameter defines the constraints enforced when adapting the CIR rate defined within the
queue queue-id rate command. The
cir parameter requires a qualifier that defines the constraint used when deriving the operational CIR for the queue. When the
cir parameter is not specified, the default constraint applies.
The no form of this command returns the CBS size to the default value.
This command can be used to override specific attributes of the specified queue’s high-prio-only parameters. The high-prio-only command configures the percentage of buffer space for the queue, used exclusively by high priority packets.
The defined high-prio-only value cannot be greater than the MBS size of the queue. Attempting to change the MBS to a value smaller than the high priority reserve will generate an error and fail execution. Attempting to set the
high-prio-only value larger than the current MBS size will also result in an error and fail execution.
The no form of this command restores the default high priority reserved size.
The percent parameter is the percentage reserved for high priority traffic on the queue. If a value of 10KBytes is desired, enter the value 10. A value of 0 specifies that none of the MBS of the queue will be reserved for high priority traffic. This does not affect RED slope operation for packets attempting to be queued.
mbs {size-in-kbytes | default
}
The no form of this command returns the MBS size assigned to the queue.
mbs {size-in-kbytes | default
}
The no form of this command
returns the MBS size assigned to the queue to the value.
rate pir-rate [cir
cir-rate]
The CIR can be used by the queue’s parent commands cir-level and
cir-weight parameters to define the amount of bandwidth considered to be committed for the child queue during bandwidth allocation by the parent scheduler.
The rate command can be executed at anytime, altering the PIR and CIR rates for all queues created through the association of the SAP egress QoS policy with the
queue-id.
The no form of the command returns all queues created with the
queue-id by association with the QoS policy to the default PIR and CIR parameters (
max, 0).
The max default specifies the amount of bandwidth in kilobits per second (thousand bits per second). The
max value is mutually exclusive to the
pir-rate value.
The cir parameter overrides the default administrative CIR used by the queue. When the
rate command is executed, a CIR setting is optional. When the
rate command has not been executed or the
cir parameter is not explicitly specified, the default CIR (0) is assumed.
Fractional values are not allowed and must be given as a positive integer.
Each scheduler must have a unique name within the context of the scheduler policy; however the same name can be reused in multiple scheduler policies. If scheduler-name already exists within the policy tier level (regardless of the inclusion of the keyword create), the context changes to that scheduler name for the purpose of editing the scheduler parameters. Modifications made to an existing scheduler are executed on all instantiated schedulers created through association with the policy of the edited scheduler. This can cause queues or schedulers to become orphaned (invalid parent association) and adversely affect the ability of the system to enforce service level agreements (SLAs).
If the scheduler-name exists within the policy on a different tier (regardless of the inclusion of the keyword create), an error occurs and the current CLI context will not change.
If the scheduler-name does not exist in this or another tier within the scheduler policy, it is assumed that an attempt is being made to create a scheduler of that name. The success of the command execution is dependent on the following:
3.
The create keyword is entered with the command if the system is configured to require it (enabled in the
environment create command).
|
Default
|
None. Each scheduler must be explicitly created.
|
rate pir-rate [cir
cir-rate]
This command can be used to override specific attributes of the specified scheduler rate. The rate command defines the maximum bandwidth that the scheduler can offer its child queues or schedulers. The maximum rate is limited to the amount of bandwidth the scheduler can receive from its parent scheduler. If the scheduler has no parent, the maximum rate is assumed to be the amount available to the scheduler. When a parent is associated with the scheduler, the CIR parameter provides the amount of bandwidth to be considered during the parent scheduler’s ‘within CIR’ distribution phase.
When a scheduler is defined without specifying a rate, the default rate is max. If the scheduler is a root scheduler (no parent defined), the default maximum rate must be changed to an explicit value. Without this explicit value, the scheduler will assume that an infinite amount of bandwidth is available and allow all child queues and schedulers to operate at their maximum rates.
The no form of this command returns all queues created with this
queue-id by association with the QoS policy to the default PIR and CIR parameters.
The pir parameter accepts a step multiplier value that specifies the multiplier used to determine the PIR rate at which the queue will operate. A value of 0 to 100000000 or the keyword
max is accepted. Any other value will result in an error without modifying the current PIR rate.
The cir parameter accepts a step-multiplier value that specifies the multiplier used to determine the CIR rate at which the queue will operate. A value of 0 to 250 or the keyword max is accepted. Any other value will result in an error without modifying the current CIR rate.
The match-qinq-dot1p command allows the top or bottom PBits to be used when evaluating the applied sap-ingress QoS policy’s Dot1P entries. The
top and
bottom keywords specify which position should be evaluated for QinQ encapsulated packets.
The no form of the command restores the default dot1p evaluation behavior for the SAP.
By default, the bottom-most service delineating Dot1Q tag’s Dot1P bits are used. Table 7 defines the default behavior for Dot1P evaluation when the
match-qinq-dot1p command is not executed.
[no
] discard-unknown-source
The no form of this command causes packets with an unknown source MAC addresses to be forwarded by destination MAC addresses in VPLS.
The no form of this command reverts to the default setting.
[no
] def-mesh-vc-id
vc-id
This VC-ID is used instead of a label to identify a virtual circuit.The VC-ID is significant between peer SRs on the same hierarchical level. The value of a VC-ID is conceptually independent from the value of the label or any other datalink specific information of the VC.
The no form of this command disables the VC-ID.
When enabled in a VPLS, mac-move monitors the re-learn rate of each MAC. If the rate exceeds the configured maximum allowed limit, it disables the SAP where the source MAC was last seen. The SAP can be disabled permanently (until a
shutdown/
no shutdown command is executed) or for a length of time that grows linearly with the number of times the given SAP was disabled. You have the option of marking a SAP as non-blockable in the
config>service>vpls>sap>limit-mac-move or
config>service>vpls>spoke-sdp>limit-mac-move contexts, see . This means that when the re-learn rate has exceeded the limit, another (blockable) SAP will be disabled instead.
The mac-move command enables the feature at the service level for SAPs and spoke SDPs, as only those objects can be blocked by this feature. Mesh SDPs are never blocked, but their re-learn rates (sap-to-mesh/spoke-to-mesh or vice versa) are still measured.
The no form of this command disables MAC move.
The no form of this command switches back to full MAC lookup.
The no form of the command reverts to the default value.
The no form of the command reverts to the default value.
[no
] mfib-table-high-wmark
high-water-mark
[no
] mfib-table-low-wmark
low-water-mark
The mfib-table-size parameter specifies the maximum number of multicast database entries for both learned and static multicast addresses for the VPLS instance.
The no form of this command removes the configured maxium MFIB table size.
[no
] send-flush-on-failure
[no
] restrict-protected-src
[no
] restrict-unprotected-dst
For VPLS, DHCP snooping must be explicitly enabled (using the snoop command) at all points where DHCP messages requiring snooping enter the VPLS instance (both from the DHCP server and from the subscribers). Lease state information is extracted from snooped DHCP ACK messages to populate lease state table entries for the SAP.
When the match-circuit-id command is enabled this part of the key is used to guarantee correctness in our lookup. This is really only needed when dealing with an IP aware DSLAM that proxies the client HW mac address.
The no form of this command returns the system to the default.
action {replace
| drop
| keep
}
The no form of this command returns the system to the default value.
When enabled, the router sends an ASCII-encoded tuple in the circuit-id sub-option of the DHCP packet. This ASCII-tuple consists of the access-node-identifier, service-id, and SAP-ID, separated by “|”.
If disabled, the circuit-id sub-option of the DHCP packet will be left empty.
The no form of this command returns the system to the default.
circuit-id [ascii-tuple
| ifindex
| sap-id
| vlan-ascii-tuple
]
When enabled, the router sends an ASCII-encoded tuple in the circuit-id sub-option of the DHCP packet. This ASCII-tuple consists of the access-node-identifier, service-id, and SAP-ID, separated by “|”.
If disabled, the circuit-id sub-option of the DHCP packet will be left empty.
The no form of this command returns the system to the default.
If disabled, the remote-id sub-option of the DHCP packet will be left empty.
The no form of this command returns the system to the default.
Use the no form of the command to disable DHCP snooping on the specified VPLS SAP or SDP binding.
server server1 [server2...(up to 8 max)]
According to RFC 3046, DHCP Relay Agent Information Option, a DHCP request where the giaddr is 0.0.0.0 and which contains a Option 82 field in the packet, should be discarded, unless it arrives on a "trusted" circuit. If trusted mode is enabled on an IP interface, the Relay Agent (the router) will modify the request's giaddr to be equal to the ingress interface and forward the request.
The no form of this command returns the system to the default.
Further subcategories are created for an IGMP (s,g) flooding list. A Layer 2 (s,g) record is created in a specific VPLS instance (the instance the (s,g) flow ingresses). SAPs within that VPLS context that join the (s,g) record are considered native SAPs within the flooding list. SAPs that join the (s,g) flooding list through the multicast VPLS registration process (MVR) from another VPLS context using the from-vpls command are considered alien SAPs. The distinction between native and alien in the list is maintained to allow the forwarding plane to enforce or suspend split-horizon-group (SHG) squelching. When the source of the (s,g) matching packet is in the same SHG as a native SAP, the packet must not be replicated to that SAP. For a SAP in another VPLS context, the source SHG of the packet has no meaning and the forwarding plane must disregard SHG matching between the native source of the packet and the alien destination. Because the SHG squelch decision is done for the whole chain based on the first SAP in the chain, all SAPs in the chain must be all native or all alien SAPs. Chains for IGMP (s,g) flooding lists are created using the following rules:
The no form of the command removes a specific egress multicast group. Deleting an egress multicast group will only succeed when the group has no SAP members. To remove SAP members, use the
no multicast-group group-name command under each SAP’s egress context.
Note: Efficient multicast replication will only be performed on IOMs that support chassis mode b If an IOM does not support mode b operation, egress-multicast-group membership is ignored on that IOM’s egress forwarding planes. The chassis need not be placed into mode b for efficient multicast replication to be performed on the capable IOMs.
The no form of the command removes an existing description string from egress-multicast-group.
The no form of the command restores the default value of 10 to the dest-chain-limit parameter for the egress-multicast-group.
The destinations per pass parameter can be modified at any time. Be aware that when changing the maximum chain length, the system will rebuild the chains according to the new limit. When this happens, it is possible that packets will not be replicated to a destination while it is being reorganized in the flooding lists’ chains. Only the chains associated with the egress-multicast-group context the command is executed in will be affected by changing the parameter.
Setting the destinations per pass parameter to a value of 0 has the effect of removing from all egress forwarding planes all chains with members from the egress-multicast-group. Replication to each destination SAP from the group is performed using the normal method (non-efficient replication). The value 0 is not considered a normal value for dest-chain-limit and is provided for debugging purposes only. Setting the value to 0 is persistent between reboots of the system.
Setting the destinations per pass parameter to a value of 1 has the effect of placing each egress-multicast-group member SAP into a chain with a single SAP. The value 1 is not considered a normal value for the
dest-chain-limit and is provided for debugging purposes only. Setting the value to 1 is persistent between reboots of the system.
Changing the egress-filter parameters within the
sap-common-requirements node automatically changes the egress filter applied to each member SAP. If the filter cannot be changed on the SAP due to resource constraints, the modification will fail.
The no form of the command removes the egress-filter from each member SAP. The
no egress-filter command specifies that an egress filter (IP or MAC)(IP, IPv6 or MAC) is not applied to a new member SAP within the egress-multicast-group.
no filter. The egress filter ID must be defined with the associated
ip or
mac keyword. If an egress-filter is not specified or the no egress-filter command is executed in the sap-common-requirements node, a new member SAP does not have an egress IP or MAC filter defined.
This command specifies the encapsulation type that must exist on the SAP’s access port to allow the SAP membership within the egress-multicast-group. The config>port>ethernet>access>encap-type command is used to define the encapsulation type for the Ethernet port. The allowed encapsulation type values are dot1q and null. If the SAP does not exist on a port with the specified encap-type, it will not be allowed into the egress-multicast-group.
If at least one SAP is currently a member of the efficient-multicast-group, the encap-type cannot be changed within the sap-common-requirements node. If the efficient-multicast-group does not contain any member SAPs, the
encap-type may be changed at anytime.
The no form of the command returns the egress-multicast-group required encapsulation type for SAPs to dot1q. If the current encap-type is set to null, the command cannot be executed when SAPs exist within the egress-multicast-group.
dot1q — For an egress-multicast-group.
null — If member SAPs are on a null encapsulated access port.
The null keyword is mutually exclusive with the
dot1q keyword. When the encap-type within the sap-common-requirements is specified to be null, the encapsulation type for the access ports associated with all SAPs within the egress-multicast-group must be set to null.
The dot1q keyword is mutually exclusive with the
null keyword. When the encap-type within the sap-common-requirements is specified to be dot1q, the encapsulation type for the access ports associated with all SAPs within the egress-multicast-group must be set to dot1q.
This command specifies the dot1q EtherType that must exist on the SAP’s access port to allow the SAP membership within the egress-multicast-group. The config>port>ethernet>access>
dot1q-etype command is used to define the EtherType used when encapsulating a packet with a dot1q tag on the Ethernet port. Any valid EtherType is allowed on the port.
The no form of the command returns the egress-multicast-group dot1q EtherType to the default value of 0x8100. If the current encap-type is set to a value other then 0x8100, the command cannot be executed when SAPs exist within the egress-multicast-group.
The interface command, under the context of services, is used to create and maintain IP routing interfaces within VPRN service IDs. The
interface command can be executed in the context of an VPRN service ID. The IP interface created is associated with the service core network routing instance and default routing table. The typical use for IP interfaces created in this manner is for subscriber internet access.
Interface names are case sensitive and must be unique within the group of defined IP interfaces defined for config router interface and
config service vprn interface. Interface names must not be in the dotted decimal notation of an IP address. For example, the name “1.1.1.1” is not allowed, but “int-1.1.1.1” is allowed. Show commands for router interfaces use either interface names or the IP addresses. Use unique IP address values and IP address names to maintain clarity. It could be unclear to the user if the same IP address and IP address name values are used. Although not recommended, duplicate interface names can exist in different router instances.
The available IP address space for local subnets and routes is controlled with the config router service-prefix command. The
service-prefix command administers the allowed subnets that can be defined on service IP interfaces. It also controls the prefixes that may be learned or statically defined with the service IP interface as the egress interface. This allows segmenting the IP address space into
config router and
config service domains.
The no form of this command removes IP the interface and all the associated configuration. The interface must be administratively shutdown before issuing the
no interface command.
If ip-int-name already exists within the service ID, the context will be changed to maintain that IP interface. If
ip-int-name already exists within another service ID or is an IP interface defined within the
config router commands, an error will occur and context will not be changed to that IP interface. If
ip-int-name does not exist, the interface is created and context is changed to that interface for further command processing.
The interface command, under the context of services, is used to create and maintain IP routing interfaces within IES service IDs. The
interface command can be executed in the context of an IES, service ID. The IP interface created is associated with the service core network routing instance and default routing table. The typical use for IP interfaces created in this manner is for subscriber internet access.
Interface names are case sensitive and must be unique within the group of defined IP interfaces defined for config router interface and
config service ies interface (that is, the network core router instance). Interface names must not be in the dotted decimal notation of an IP address. For example, the name “1.1.1.1” is not allowed, but “int-1.1.1.1” is allowed. Show commands for router interfaces use either interface names or the IP addresses. Use unique IP address values and IP address names to maintain clarity. It could be unclear to the user if the same IP address and IP address name values are used. Although not recommended, duplicate interface names can exist in different router instances.
The available IP address space for local subnets and routes is controlled with the config router service-prefix command. The
service-prefix command administers the allowed subnets that can be defined on IES IP interfaces. It also controls the prefixes that may be learned or statically defined with the IES IP interface as the egress interface. This allows segmenting the IP address space into
config router and
config service domains.
The no form of this command removes the IP interface and all the associated configuration. The interface must be administratively shutdown before issuing the
no interface command.
For IES services, the IP interface must be shutdown before the SAP on that interface may be removed. IES services do not have the
shutdown command in the SAP CLI context. IES service SAPs rely on the interface status to enable and disable them.
If ip-int-name already exists within the service ID, the context will be changed to maintain that IP interface. If
ip-int-name already exists within another service ID or is an IP interface defined within the
config router commands, an error will occur and context will not be changed to that IP interface. If
ip-int-name does not exist, the interface is created and context is changed to that interface for further command processing.
address {ip-address/mask|ip-address netmask} [broadcast all-ones
|host-ones
] [track-srrp
srrp-instance]
The local subnet that the address command defines must be part of the services’ address space within the routing context using the
config router service-prefix command. The default is to disallow the complete address space to services. Once a portion of the address space is allocated as a service prefix, that portion can be made unavailable for IP interfaces defined within the
config router interface CLI context for network core connectivity with the
exclude option in the
config router service-prefix command.
Use the no form of this command to remove the IP address assignment from the IP interface. When the
no address command is entered, the interface becomes operationally down.
The IP address of the IP interface. The ip-address portion of the
address command specifies the IP host address that will be used by the IP interface within the subnet. This address must be unique within the subnet and specified in dotted decimal notation. Allowed values are IP addresses in the range 1.0.0.0 – 223.255.255.255 (with support of /31 subnets).
The forward slash is a parameter delimiter and separates the ip-address portion of the IP address from the mask that defines the scope of the local subnet. No spaces are allowed between the
ip-address, the “
/” and the
mask-length parameter. If a forward slash is not immediately following the
ip-address, a dotted decimal mask must follow the prefix.
The optional broadcast parameter overrides the default broadcast address used by the IP interface when sourcing IP broadcasts on the IP interface. If no broadcast format is specified for the IP address, the default value is
host-ones which indictates a subnet broadcast address. Use this parameter to change the broadcast address to
all-ones or revert back to a broadcast address of
host-ones.
The all-ones keyword following the
broadcast parameter specifies the broadcast address used by the IP interface for this IP address will be 255.255.255.255, also known as the local broadcast.
The host-ones keyword following the
broadcast parameter specifies that the broadcast address used by the IP interface for this IP address will be the subnet broadcast address. This is an IP address that corresponds to the local subnet described by the
ip-address and the
mask-length or
mask with all the host bits set to binary one. This is the default broadcast address used by an IP interface.
The broadcast parameter within the
address command does not have a negate feature, which is usually used to revert a parameter to the default value. To change the
broadcast type to
host-ones after being changed to
all-ones, the
address command must be executed with the
broadcast parameter defined.
[no
] allow-directed-broadcast
A directed broadcast is a packet received on a local router interface destined for the subnet broadcast address on another IP interface. The allow-directed-broadcasts command on an IP interface enables or disables the transmission of packets destined to the subnet broadcast address of the egress IP interface.
The no form of this command disables the forwarding of directed broadcasts out of the IP interface.
no allow-directed-broadcasts — Directed broadcasts are dropped
Note that you can configure an IES interface as a loopback interface by issuing the loopback command instead of the
sap sap-id command. The loopback flag cannot be set on an interface where a SAP is already defined and a SAP cannot be defined on a loopback interface.
The no form of the command returns the MAC address of the IP interface to the default value.
Enter an existing SAP without the create keyword to edit SAP parameters. The SAP is owned by the service in which it was created.
Note that you can configure an IES interface as a loopback interface by issuing the loopback command instead of the
sap sap-id command. The loopback flag cannot be set on an interface where a SAP is already defined and a SAP cannot be defined on a loopback interface.
The no form of this command deletes the SAP with the specified port. When a SAP is deleted, all configuration parameters for the SAP will also be deleted. For IES, the IP interface must be shutdown before the SAP on that interface may be removed.
secondary {ip-address/mask | ip-address netmask} [broadcast all-ones
| host-ones
] [igp-inhibit
]
The IP address of the IP interface. The ip-address portion of the
address command specifies the IP host address that will be used by the IP interface within the subnet. This address must be unique within the subnet and specified in dotted decimal notation. Allowed values are IP addresses in the range 1.0.0.0 – 223.255.255.255 (with support of /31 subnets).
The optional broadcast parameter overrides the default broadcast address used by the IP interface when sourcing IP broadcasts on the IP interface. If no broadcast format is specified for the IP address, the default value is
host-ones which indictates a subnet broadcast address. Use this parameter to change the broadcast address to
all-ones or revert back to a broadcast address of
host-ones.
The all-ones keyword following the
broadcast parameter specifies the broadcast address used by the IP interface for this IP address will be 255.255.255.255, also known as the local broadcast.
The host-ones keyword following the
broadcast parameter specifies that the broadcast address used by the IP interface for this IP address will be the subnet broadcast address. This is an IP address that corresponds to the local subnet described by the
ip-address and the
mask-length or
mask with all the host bits set to binary one. This is the default broadcast address used by an IP interface.
The
broadcast parameter within the
address command does not have a negate feature, which is usually used to revert a parameter to the default value. To change the
broadcast type to
host-ones after being changed to
all-ones, the
address command must be executed with the
broadcast parameter defined.
The optional igp-inhibit parameter signals that the given secondary IP interface should not be recognized as a local interface by the running IGP. For OSPF and IS-IS, this means that the specified secondary IP interfaces will not be injected and used as passive interfaces and will not be advertised as internal IP interfaces into the IGP’s link state database. For RIP, this means that these secondary IP interfaces will not source RIP updates.
The no tos-marking-state command is used to restore the trusted state to a network IP interface. This is equivalent to executing the tos-marking-state trusted command.
Specifies that all egress network IP interfaces will remark IP packets received on the network interface according to the egress marking definitions on each network interface.
address {ip-address/mask | ip-address netmask} [gw-ip-address
ip-address] [track-srrp
srrp-inst] [holdup-time
msec]
The IP address of the IP interface. The ip-address portion of the
address command specifies the IP host address that will be used by the IP interface within the subnet. This address must be unique within the subnet and specified in dotted decimal notation. Allowed values are IP addresses in the range 1.0.0.0 – 223.255.255.255 (with support of /31 subnets).
The forward slash is a parameter delimiter and separates the ip-address portion of the IP address from the mask that defines the scope of the local subnet. No spaces are allowed between the
ip-address, the “
/” and the
mask-length parameter. If a forward slash is not immediately following the
ip-address, a dotted decimal mask must follow the prefix.
This command will enable the subscriber-interface route to track the SRRP state of the specified SRRP instance. The route will update its state attribute to reflect the
state of SRRP instance:
The no form of the command removes an SRRP instance from a group IP interface. Once removed, the group interface ignores ARP requests for the SRRP gateway IP addresses that may exist on subscriber subnets associated with the group IP interface. Then the group interface stops routing using the redundant IP interface associated with the group IP interface and will stop routing with the SRRP gateway MAC address. Ingress packets destined to the SRRP gateway MAC will also be silently discarded. This is the same behavior as a group IP interface that is disabled (shutdown).
[no
] bfd-enable
[service-id] interface
interface-name dst-ip
ip-address
The no form of this command removes BFD from the configuration.
The no form of the command removes the explicit SRRP gateway MAC address from the SRRP instance. The SRRP gateway MAC address can only be changed or removed when the SRRP instance is shutdown.
The no form of the command restores the default interval.
The no form of the command can only be executed when the SRRP instance is shutdown. Executing no message-path allows the existing SAP to be used for subscriber management functions. A new message-path SAP must be defined prior to activating the SRRP instance.
prefix ipv6-address/prefix-length [pd
] [wan-host
] track-srrp
srrp-instance [holdup-time
milli-seconds]
The IP address of the IP interface. The ip-address portion of the
address command specifies the IP host address that will be used by the IP interface within the subnet. This address must be unique within the subnet and specified in dotted decimal notation. Allowed values are IP addresses in the range 1.0.0.0 – 223.255.255.255 (with support of /31 subnets).
The forward slash is a parameter delimiter and separates the ip-address portion of the IP address from the mask that defines the scope of the local subnet. No spaces are allowed between the
ip-address, the “
/” and the
mask-length parameter. If a forward slash is not immediately following the
ip-address, a dotted decimal mask must follow the prefix.
[no
] policy
vrrp-policy-id
The no form of the command removes the association with vrrp-policy-id from the SRRP instance.
The no form of the command restores the default base priority to the SRRP instance. If a VRRP policy is associated with the SRRP instance, it will use the default base priority as the basis for any modifications to the SRRP instances in-use priority.
Enabling the arp-populate command will remove any dynamic ARP entries learned on this interface from the ARP cache.
The arp-populate command will fail if an existing static ARP entry exists for this interface.
The arp-populate command will fail if an existing static subscriber host on the SAP does not have both MAC and IP addresses specified.
Once arp-populate is enabled, creating a static subscriber host on the SAP without both an IP address and MAC address will fail.
When arp-populate is enabled, the system will not send out ARP requests for hosts that are not in the ARP cache. Only statically configured and DHCP learned hosts are reachable through an IP interface with
arp-populate enabled. The
arp-populate command can only be enabled on IES and VPRN interfaces supporting Ethernet encapsulation.
Use the no form of the command to disable ARP cache population functions for static and dynamic hosts on the interface. All static and dynamic host information for this interface will be removed from the system’s ARP cache.
When the arp-populate and
lease-populate commands are enabled on an IES interface, the ARP table entries will no longer be dynamically learned, but instead by snooping DHCP ACK message from a DHCP server. In this case the configured
arp-timeout value has no effect.
The default value for arp-timeout is 14400 seconds (4 hours).
The no form of this command restores
arp-timeout to the default value.
Specifies the source to be used for generation of subscriber host connectivity verification packets. The
vrrp keyword specifies that the VRRP state should be used to select proper IP and MAC (active uses VRID, back-up uses interface addresses). The
interface keyword forces the use of the interface mac and ip addresses. Note that there are up to 16 possible subnets on a given interface, therefore the subscriber host connectivity verification tool will use always an address of the subnet to which the given host is pertaining. In case of group-interfaces, one of the parent subscriber-interface subnets (depending on host's address) will be used.
The no form of the command removes the octets value from the configuration.
[no
] private-retail-subnets
If the retail VPRN is of the type hub, this attribute is mandatory. In this case, private retail subnets will be enabled by default and it will not be possible to deconfigure it.
The no form of the command disables the IPv6 IPoE bridged mode.
[no
] allow-multiple-wan-addresses
[no
] router-advertisements
[no
] current-hop-limit
limit
[no
] managed-configuration
[no
] other-stateful-configuration
If a local node sends an ICMP mask request to the router interface, the mask-reply command configures the router interface to reply to the request.
The no form of this command disables replies to ICMP mask requests on the router interface.
[no
] proxy-arp-policy
policy-name [policy-name...(up to 5 max)]
The no form of this command disables the proxy ARP capability.
The redirects command enables the generation of ICMP redirects on the router interface. The rate at which ICMP redirects is issued can be controlled with the optional
number and
seconds parameters by indicating the maximum number of redirect messages that can be issued on the interface for a given time interval.
The no form of this command disables the generation of icmp redirects on the router interface.
redirects 100 10 — Maximum of 100 redirect messages in 10 seconds.
The no form of this command removes a static ARP entry.
The no form of this command disables the limiting the rate of TTL expired messages on the router interface.
The unreachables command enables the generation of ICMP destination unreachables on the router interface. The rate at which ICMP unreachables is issued can be controlled with the optional
number and
seconds parameters by indicating the maximum number of destination unreachable messages which can be issued on the interface for a given time interval.
By default, generation of ICMP destination unreachables messages is enabled at a maximum rate of 100 per 10 second time interval.
The no form of this command disables the generation of icmp destination unreachables on the router interface.
address ipv6-address/prefix-length [eui-64
]
When the eui-64 keyword is specified, a complete IPv6 address from the supplied prefix and 64-bit interface identifier is formed. The 64-bit interface identifier is derived from MAC address on Ethernet interfaces. For interfaces without a MAC address, for example ATM interfaces, the Base MAC address of the chassis is used.
address ipv6-address/prefix-length [pd] [wan-host] [track-srrp srrp-instance] [holdup-time milli-seconds]
no address ipv6-address/prefix-length
[no
] allow-unmatching-prefixes
[no
] neighbor-solicitation
The no form of the command disables auto-reply.
The no form of the command disables router-solitcitation.
prefix ipv6-address/prefix-length [pd
] [wan-host
]
The no form of the command disables DHCP6 relay.
The no form of the command disables dynamic host lease state management.
The no form of the command disables neighbor resolution.
The no form of the command disables DHCPv6 relay information options.
The no form of the command disables the sending of interface ID options in the DHCPv6 relay packet
The no form of the command disables the sending of remote ID option in the DHCPv6 relay packet.
The no form of the command disables the sending of ICMPv6 “packet-too-big” messages.
The no form of the command disables the sending of “parameter-problem” ICMP messages.
The no form of this command reverts to the default value.
If only the mandatory egress-label1 parameter is specified, only services using the specified label are displayed.
If both egress-label1 and
egress-label2 parameters are specified, the services using the range of labels X where
egress-label1 <= X <=
egress-label2 are displayed.
Use the show router ldp bindings command to display dynamic labels.
A:ALA-12# show service egress-label 0 10000
==============================================================================
Martini Service Labels
==============================================================================
Svc Id Sdp Id Type I.Lbl E.Lbl
------------------------------------------------------------------------------
1 10:1 Mesh 0 0
1 20:1 Mesh 0 0
1 30:1 Mesh 0 0
1 100:1 Mesh 0 0
...
1 107:1 Mesh 0 0
1 108:1 Mesh 0 0
1 300:1 Mesh 0 0
1 301:1 Mesh 0 0
1 302:1 Mesh 0 0
1 400:1 Mesh 0 0
1 500:2 Spok 131070 2001
1 501:1 Mesh 131069 2000
100 300:100 Spok 0 0
200 301:200 Spok 0 0
300 302:300 Spok 0 0
400 400:400 Spok 0 0
------------------------------------------------------------------------------
Number of Bindings Found : 23
==============================================================================
A:ALA-12#
A:ALA-12# show service fdb-info
===============================================================================
Forwarding Database (FDB) Information
===============================================================================
Service Id : 700 Mac Move : Disabled
Mac Move Rate : 10 Mac Move Timeout : 10
Table Size : 250 Total Count : 0
Learned Count : 0 Static Count : 0
Remote Age : 900 Local Age : 300
High WaterMark : 95% Low Watermark : 90%
Mac Aging : Enabl Relearn Only : False
Service Id : 725 Mac Move : Disabled
Mac Move Rate : 10 Mac Move Timeout : 10
Table Size : 250 Total Count : 0
Learned Count : 0 Static Count : 0
Remote Age : 900 Local Age : 300
High WaterMark : 95% Low Watermark : 90%
Mac Learning : Enabl Discard Unknown : Dsabl
Mac Aging : Enabl Relearn Only : False
Service Id : 740 Mac Move : Disabled
Mac Move Rate : 10 Mac Move Timeout : 10
Table Size : 250 Total Count : 0
Learned Count : 0 Static Count : 0
Remote Age : 900 Local Age : 300
High WaterMark : 95% Low Watermark : 90%
Mac Learning : Enabl Discard Unknown : Dsabl
Mac Aging : Enabl Relearn Only : False
...
-------------------------------------------------------------------------------
Total Service FDBs : 7
Total FDB Configured Size : 1750
Total FDB Entries In Use : 0
-------------------------------------------------------------------------------
===============================================================================
*A:ALA-48#
A:ALA-12# show service fdb-mac 00:99:00:00:00:00
==============================================================================
Services Using Forwarding Database Mac 00:99:00:00:00:00
==============================================================================
ServId MAC Source-Identifier Type/Age Last Change
------------------------------------------------------------------------------
1 00:99:00:00:00:00 sap:1/2/7:0 Static
==============================================================================
A:ALA-12#
If only the mandatory ingress-label1 parameter is specified, only services using the specified label are displayed.
If both ingress-label1 and
ingress-label2 parameters are specified, the services using the range of labels X where
ingress-label1 <= X <=
ingress-label2 are displayed.
Use the show router vprn-service-id ldp bindings command to display dynamic labels.
|
Default
|
The ingress-label1 value.
|
A:ALA-12# show service ingress label 0
==============================================================================
Martini Service Labels
==============================================================================
Svc Id Sdp Id Type I.Lbl E.Lbl
------------------------------------------------------------------------------
1 10:1 Mesh 0 0
1 20:1 Mesh 0 0
1 30:1 Mesh 0 0
1 50:1 Mesh 0 0
1 100:1 Mesh 0 0
1 101:1 Mesh 0 0
1 102:1 Mesh 0 0
1 103:1 Mesh 0 0
1 104:1 Mesh 0 0
1 105:1 Mesh 0 0
1 106:1 Mesh 0 0
1 107:1 Mesh 0 0
1 108:1 Mesh 0 0
1 300:1 Mesh 0 0
1 301:1 Mesh 0 0
1 302:1 Mesh 0 0
1 400:1 Mesh 0 0
1 500:2 Spok 131070 2001
1 501:1 Mesh 131069 2000
100 300:100 Spok 0 0
200 301:200 Spok 0 0
300 302:300 Spok 0 0
400 400:400 Spok 0 0
------------------------------------------------------------------------------
Number of Bindings Found : 23
------------------------------------------------------------------------------
A:ALA-12#
sap-using [ingress
| egress
] atm-td-profile
td-profile-id
sap-using [ingress
| egress
] filter
filter-id
sap-using [ingress
| egress
] qos-policy
qos-policy-id
A:ALA-12# show service sap-using sap 1/1
==============================================================================
Service Access Points
==============================================================================
PortId SvcId SapMTU I.QoS I.Mac/IP E.QoS E.Mac/IP A.Pol Adm Opr
------------------------------------------------------------------------------
1/1/7:0 1 1518 10 8 10 none none Up Up
1/1/11:0 100 1514 1 none 1 none none Down Down
1/1/7:300 300 1518 10 none 10 none 1000 Up Up
------------------------------------------------------------------------------
Number of SAPs : 3
------------------------------------------------------------------------------
A:ALA-12#
sdp [sdp-id | far-end
ip-addr] [detail
]
*A:ALA-48# show service id 700 sdp 2
===============================================================================
Service Destination Point (Sdp Id : 2)
===============================================================================
SdpId Type IP address Adm Opr I.Lbl E.Lbl
-------------------------------------------------------------------------------
2:222 Spok 10.10.10.104 Up Down 0 0
2:700 Mesh 10.10.10.104 Up Down 0 0
===============================================================================
*A:ALA-48#
sdp-using [sdp-id[:vc-id] | far-end ip-address]
A:ALA-1# show service sdp-using 300
===============================================================================
Service Destination Point (Sdp Id : 300)
===============================================================================
SvcId SdpId Type Far End Opr State I.Label E.Label
-------------------------------------------------------------------------------
1 300:1 Mesh 10.0.0.13 Up 131071 131071
2 300:2 Spok 10.0.0.13 Up 131070 131070
100 300:100 Mesh 10.0.0.13 Up 131069 131069
101 300:101 Mesh 10.0.0.13 Up 131068 131068
102 300:102 Mesh 10.0.0.13 Up 131067 131067
-------------------------------------------------------------------------------
Number of SDPs : 5
===============================================================================
A:ALA-1#
*A:ALA-48>show>service# service-using vpls
==============================================================================
Services [vpls]
===============================================================================
ServiceId Type Adm Opr CustomerId Last Mgmt Change
-------------------------------------------------------------------------------
700 VPLS Up Down 7 04/11/2007 09:36:36
725 VPLS Down Down 7 04/11/2007 09:36:36
740 VPLS Down Down 1 04/11/2007 09:36:36
750 VPLS Down Down 7 04/11/2007 09:36:36
1730 VPLS Down Down 1730 04/11/2007 09:36:36
9000 VPLS Up Down 6 04/11/2007 09:36:36
90001 VPLS Up Down 6 04/11/2007 09:36:36
-------------------------------------------------------------------------------
Matching Services : 7
===============================================================================
*A:ALA-48>show>service#
*A:Dut-C# show service active-subscribers
===============================================================================
Active Subscribers
===============================================================================
-------------------------------------------------------------------------------
Subscriber hpolSub1 (hpolSubProf2)
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
(1) SLA Profile Instance sap:lag-1:2000.1 - sla:hpolSlaProf1
-------------------------------------------------------------------------------
IP Address
MAC Address PPPoE-SID Origin
--------------------------------------------------------
200.1.4.194
00:01:00:00:03:c1 1 IPCP
-------------------------------------------------------------------------------
(2) SLA Profile Instance sap:lag-1:2000.1 - sla:hpolSlaProf2
-------------------------------------------------------------------------------
IP Address
MAC Address PPPoE-SID Origin
--------------------------------------------------------
200.1.4.35
00:01:00:00:03:22 N/A ARP-Host
200.1.4.195
00:01:00:00:03:c2 1 IPCP
-------------------------------------------------------------------------------
Subscriber hpolSub16 (hpolSubProf1)
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
(1) SLA Profile Instance sap:[lag-1:2000.2] - sla:hpolSlaProf1
-------------------------------------------------------------------------------
IP Address
MAC Address PPPoE-SID Origin
--------------------------------------------------------
200.1.4.224
00:01:00:00:03:df 1 IPCP
-------------------------------------------------------------------------------
Subscriber hpolSub2 (hpolSubProf1)
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
(1) SLA Profile Instance sap:lag-1:2000.1 - sla:hpolSlaProf1
-------------------------------------------------------------------------------
IP Address
MAC Address PPPoE-SID Origin
--------------------------------------------------------
200.1.4.196
00:01:00:00:03:c3 1 IPCP
-------------------------------------------------------------------------------
Number of active subscribers : 3
===============================================================================
*A:Dut-C#
filter [subscriber
sub-ident-string] [origin
origin]
groups [group
group-ip-address]
igmp [subscriber
sub-ident-string][detail
]
*B:Dut-C# show service active-subscribers igmp
===============================================================================
Active Subscribers
===============================================================================
Subscriber IGMP-Policy
HostAddr GrpItf NumGroups
-------------------------------------------------------------------------------
sub_1 pol1
112.112.1.1 gi_1_1 1
112.112.1.2 gi_1_1 2
sub_2 pol1
112.112.1.3 gi_1_2 0
-------------------------------------------------------------------------------
Number of Subscribers : 2
===============================================================================
*B:Dut-C#
*B:Dut-C# show service active-subscribers igmp detail
===============================================================================
Active Subscribers Detail
===============================================================================
Subscriber IGMP-Policy
HostAddr GrpItf NumGroups
GrpAddr Type Up-Time Mode
SrcAddr Type Blk/Fwd
-------------------------------------------------------------------------------
sub_1 pol1
112.112.1.1 gi_1_1 1
225.0.0.1 Dynamic 0d 00:00:53 Include
11.11.0.1 Dynamic Fwd
11.11.0.2 Dynamic Fwd
112.112.1.2 gi_1_1 2
225.0.0.1 Dynamic 0d 00:00:44 Exclude
11.11.0.1 Dynamic Blk
225.0.0.2 Dynamic 0d 00:00:44 Exclude
11.11.0.1 Dynamic Blk
sub_2 pol1
112.112.1.3 gi_1_2 0
-------------------------------------------------------------------------------
Number of Subscribers : 2
===============================================================================
*B:Dut-C#
*B:Dut-C# show service active-subscribers igmp subscriber "sub_1" detail
===============================================================================
Active Subscribers Detail
===============================================================================
Subscriber IGMP-Policy
HostAddr GrpItf NumGroups
GrpAddr Type Up-Time Mode
SrcAddr Type Blk/Fwd
-------------------------------------------------------------------------------
sub_1 pol1
112.112.1.1 gi_1_1 1
225.0.0.1 Dynamic 0d 00:01:04 Include
11.11.0.1 Dynamic Fwd
11.11.0.2 Dynamic Fwd
112.112.1.2 gi_1_1 2
225.0.0.1 Dynamic 0d 00:00:55 Exclude
11.11.0.1 Dynamic Blk
225.0.0.2 Dynamic 0d 00:00:55 Exclude
11.11.0.1 Dynamic Blk
-------------------------------------------------------------------------------
Number of Subscribers : 1
===============================================================================
B:Dut-C#
subscriber sub-ident-string sap
sap-id sla-profile
sla-profile-name
subscriber sub-ident-string sap
sap-id sla-profile
sla-profile-name detail
subscriber sub-ident-string sap
sap-id sla-profile
sla-profile-name mirror
*A:Dut-C# show service active-subscribers subscriber "hpolSub1"
===============================================================================
Active Subscribers
===============================================================================
-------------------------------------------------------------------------------
Subscriber hpolSub1 (hpolSubProf2)
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
(1) SLA Profile Instance sap:lag-1:2000.1 - sla:hpolSlaProf1
-------------------------------------------------------------------------------
IP Address
MAC Address PPPoE-SID Origin
--------------------------------------------------------
200.1.4.194
00:01:00:00:03:c1 1 IPCP
-------------------------------------------------------------------------------
(2) SLA Profile Instance sap:lag-1:2000.1 - sla:hpolSlaProf2
-------------------------------------------------------------------------------
IP Address
MAC Address PPPoE-SID Origin
--------------------------------------------------------
200.1.4.35
00:01:00:00:03:22 N/A ARP-Host
200.1.4.195
00:01:00:00:03:c2 1 IPCP
===============================================================================
*A:Dut-C#
*A:Dut-C# show service active-subscribers subscriber "hpolSub1"
sap lag-1:2000.1 sla-profile "hpolSlaProf2"
===============================================================================
Active Subscribers
===============================================================================
-------------------------------------------------------------------------------
Subscriber hpolSub1 (hpolSubProf2)
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
(1) SLA Profile Instance sap:lag-1:2000.1 - sla:hpolSlaProf2
-------------------------------------------------------------------------------
IP Address
MAC Address PPPoE-SID Origin
--------------------------------------------------------
200.1.4.35
00:01:00:00:03:22 N/A ARP-Host
200.1.4.195
00:01:00:00:03:c2 1 IPCP
===============================================================================
*A:Dut-C#
*A:Dut-C# show service active-subscribers subscriber "hpolSub1"
sap lag-1:2000.1 sla-profile "hpolSlaProf1" detail
===============================================================================
Active Subscribers
===============================================================================
-------------------------------------------------------------------------------
Subscriber hpolSub1 (hpolSubProf2)
-------------------------------------------------------------------------------
I. Sched. Policy : N/A
E. Sched. Policy : N/A E. Agg Rate Limit: 6071693
I. Policer Ctrl. : N/A
E. Policer Ctrl. : N/A
Q Frame-Based Ac*: Disabled
Acct. Policy : N/A Collect Stats : Disabled
Rad. Acct. Pol. : hpolRadAcctPol
Dupl. Acct. Pol. : N/A
ANCP Pol. : N/A
HostTrk Pol. : N/A
IGMP Policy : N/A
Sub. MCAC Policy : N/A
NAT Policy : N/A
Def. Encap Offset: none Encap Offset Mode: auto
Avg Frame Size : 120
Sub. ANCP-String : "hpolSub1"
Sub. Int Dest Id : "2000"
Host Trk Rate Adj: N/A
RADIUS Rate-Limit: 10220541
Oper-Rate-Limit : 10220541
-------------------------------------------------------------------------------
(1) SLA Profile Instance
- sap:lag-1:2000.1 (VPRN 2000 - grp-Vprn-1)
- sla:hpolSlaProf1
-------------------------------------------------------------------------------
Description : SLA Profile Id hpolSlaProf1
Host Limit : No Limit
Ingress Qos-Policy : 2 Egress Qos-Policy : 2 (vport)
Ingress Queuing Type : Service-queuing (non policer)
Ingr IP Fltr-Id : n/a Egr IP Fltr-Id : n/a
Ingr IPv6 Fltr-Id : n/a Egr IPv6 Fltr-Id : n/a
Ingress Report-Rate : N/A
Egress Report-Rate : N/A
Egress Remarking : from Sap Qos
Credit Control Pol. : N/A
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
IP Address
MAC Address PPPoE-SID Origin
--------------------------------------------------------
200.1.4.194
00:01:00:00:03:c1 1 IPCP
------------------------------------------------------------------------
SLA Profile Instance statistics
------------------------------------------------------------------------
Packets Octets
Off. HiPrio : 0 0
Off. LowPrio : 0 0
Off. Uncolor : 0 0
Queueing Stats (Ingress QoS Policy 2)
Dro. HiPrio : 0 0
Dro. LowPrio : 0 0
For. InProf : 0 0
For. OutProf : 0 0
Queueing Stats (Egress QoS Policy 2)
Dro. InProf : 0 0
Dro. OutProf : 0 0
For. InProf : 0 0
For. OutProf : 0 0
------------------------------------------------------------------------
SLA Profile Instance per Queue statistics
------------------------------------------------------------------------
Packets Octets
Egress Queue 1
Dro. InProf : 0 0
Dro. OutProf : 0 0
For. InProf : 0 0
For. OutProf : 0 0
Egress Queue 2
Dro. InProf : 0 0
Dro. OutProf : 0 0
For. InProf : 0 0
For. OutProf : 0 0
Egress Queue 3
Dro. InProf : 0 0
Dro. OutProf : 0 0
For. InProf : 0 0
For. OutProf : 0 0
Egress Queue 4
Dro. InProf : 0 0
Dro. OutProf : 0 0
For. InProf : 0 0
For. OutProf : 0 0
Egress Queue 5
Dro. InProf : 0 0
Dro. OutProf : 0 0
For. InProf : 0 0
For. OutProf : 0 0
Egress Queue 6
Dro. InProf : 0 0
Dro. OutProf : 0 0
For. InProf : 0 0
For. OutProf : 0 0
Egress Queue 7
Dro. InProf : 0 0
Dro. OutProf : 0 0
For. InProf : 0 0
For. OutProf : 0 0
Egress Queue 8
Dro. InProf : 0 0
Dro. OutProf : 0 0
For. InProf : 0 0
For. OutProf : 0 0
------------------------------------------------------------------------
SLA Profile Instance per Policer statistics
------------------------------------------------------------------------
Packets Octets
Ingress Policer 1 (Stats mode: minimal)
Off. All : 0 0
Dro. All : 0 0
For. All : 0 0
===============================================================================
*A:Dut-C#
A:ALA-12# show service id 9000 all
===============================================================================
Service Detailed Information
===============================================================================
Service Id : 9000 Vpn Id : 0
Service Type : VPLS
Description : This is a distributed VPLS.
Customer Id : 6 Last Mgmt Change : 01/18/2007 10:31:58
Adm : Up Oper : Down
MTU : 1514 Def. Mesh VC Id : 750
SAP Count : 1 SDP Bind Count : 3
-------------------------------------------------------------------------------
Split Horizon Group specifics
-------------------------------------------------------------------------------
Split Horizon Group : splitgroup1
-------------------------------------------------------------------------------
Description : Split horizon group 1
Instance Id : 1 Last Changed : 01/18/2007 10:31:58
-------------------------------------------------------------------------------
Service Destination Points(SDPs)
-------------------------------------------------------------------------------
Sdp Id 2:22 -(10.10.10.104)
-------------------------------------------------------------------------------
Description : GRE-10.10.10.104
SDP Id : 2:22 Type : Spoke
VC Type : Ether VC Tag : n/a
Admin Path MTU : 0 Oper Path MTU : 0
Far End : 10.10.10.104 Delivery : GRE
Flags : SdpOperDown
NoIngVCLabel NoEgrVCLabel
PathMTUTooSmall
Admin State : Up Oper State : Down
Ingress Label : 0 Egress Label : 0
Ingress Filter : n/a Egress Filter : n/a
Last Changed : 01/18/2007 10:31:58 Signaling : TLDP
KeepAlive Information :
Admin State : Disabled Oper State : Disabled
Hello Time : 10 Hello Msg Len : 0
Max Drop Count : 3 Hold Down Time : 10
Statistics :
I. Fwd. Pkts. : 0 I. Dro. Pkts. : 0
E. Fwd. Pkts. : 0 E. Fwd. Octets : 0
Associated LSP LIST :
SDP Delivery Mechanism is not MPLS
-------------------------------------------------------------------------------
Rstp Service Destination Point specifics
-------------------------------------------------------------------------------
Mac Move : Blockable
Rstp Admin State : Up Rstp Oper State : Down
Core Connectivity : Down
Port Role : N/A Port State : Discarding
Port Number : 2049 Port Priority : 128
Port Path Cost : 10 Auto Edge : Enabled
Admin Edge : Disabled Oper Edge : N/A
Link Type : Pt-pt BPDU Encap : Dot1d
Designated Bridge : N/A Designated Port Id: 0
Active Protocol : N/A
Fwd Transitions : 0 Bad BPDUs rcvd : 0
Cfg BPDUs rcvd : 0 Cfg BPDUs tx : 0
TCN BPDUs rcvd : 0 TCN BPDUs tx : 0
RST BPDUs rcvd : 0 RST BPDUs tx : 0
-------------------------------------------------------------------------------
Sdp Id 5:750 -(128.251.10.49)
-------------------------------------------------------------------------------
SDP Id : 5:750 Type : Mesh
VC Type : Ether VC Tag : n/a
Admin Path MTU : 0 Oper Path MTU : 0
Far End : 128.251.10.49 Delivery : GRE
Flags : SdpOperDown
NoIngVCLabel NoEgrVCLabel
PathMTUTooSmall
Admin State : Up Oper State : Down
Ingress Label : 0 Egress Label : 0
Ingress Filter : n/a Egress Filter : n/a
Last Changed : 01/18/2007 10:31:58 Signaling : TLDP
KeepAlive Information :
Admin State : Disabled Oper State : Disabled
Hello Time : 10 Hello Msg Len : 0
Max Drop Count : 3 Hold Down Time : 10
Statistics :
I. Fwd. Pkts. : 0 I. Dro. Pkts. : 0
E. Fwd. Pkts. : 0 E. Fwd. Octets : 0
Associated LSP LIST :
SDP Delivery Mechanism is not MPLS
-------------------------------------------------------------------------------
Sdp Id 7:750 -(10.10.10.106)
-------------------------------------------------------------------------------
Description : to-MPLS-10.10.10.49
SDP Id : 7:750 Type : Mesh
VC Type : Ether VC Tag : n/a
Admin Path MTU : 0 Oper Path MTU : 0
Far End : 10.10.10.106 Delivery : MPLS
Flags : SdpOperDown
NoIngVCLabel NoEgrVCLabel
PathMTUTooSmall
Admin State : Up Oper State : Down
Ingress Label : 0 Egress Label : 0
Ingress Filter : n/a Egress Filter : n/a
Last Changed : 01/18/2007 10:31:58 Signaling : TLDP
KeepAlive Information :
Admin State : Disabled Oper State : Disabled
Hello Time : 10 Hello Msg Len : 0
Max Drop Count : 3 Hold Down Time : 10
Statistics :
I. Fwd. Pkts. : 0 I. Dro. Pkts. : 0
E. Fwd. Pkts. : 0 E. Fwd. Octets : 0
Associated LSP LIST :
Lsp Name : to-49
Admin State : Down Oper State : Down
Time Since Last Tr*: 02h01m08s
------------------------------------------------------------------------------
Number of SDPs : 3
-------------------------------------------------------------------------------
Service Access Points
-------------------------------------------------------------------------------
SAP 1/2/5:0
-------------------------------------------------------------------------------
Service Id : 9000
SAP : 1/2/5:0 Encap : q-tag
Dot1Q Ethertype : 0x8100 QinQ Ethertype : 0x8100
Admin State : Up Oper State : Down
Flags : PortOperDown
Last Status Change : 04/11/2007 15:56:40
Last Mgmt Change : 04/11/2007 17:24:54
Max Nbr of MAC Addr: No Limit Total MAC Addr : 0
Learned MAC Addr : 0 Static MAC Addr : 0
Admin MTU : 1518 Oper MTU : 1518
Ingress qos-policy : 1 Egress qos-policy : 1
Ingress Filter-Id : n/a Egress Filter-Id : n/a
Mac Learning : Enabled Discard Unkwn Srce: Disabled
Mac Aging : Enabled
Multi Svc Site : None
Acct. Pol : None Collect Stats : Disabled
-------------------------------------------------------------------------------
Rstp Service Access Point specifics
-------------------------------------------------------------------------------
Mac Move : Blockable
Rstp Admin State : Up Rstp Oper State : Down
Core Connectivity : Down
Port Role : N/A Port State : Discarding
Port Number : 2048 Port Priority : 128
Port Path Cost : 10 Auto Edge : Enabled
Admin Edge : Disabled Oper Edge : N/A
Link Type : Pt-pt BPDU Encap : Dot1d
Designated Bridge : N/A Designated Port Id: 0
Active Protocol : N/A
Forward transitions: 0 Bad BPDUs rcvd : 0
Cfg BPDUs rcvd : 0 Cfg BPDUs tx : 0
TCN BPDUs rcvd : 0 TCN BPDUs tx : 0
RST BPDUs rcvd : 0 RST BPDUs tx : 0
-------------------------------------------------------------------------------
Sap Statistics
-------------------------------------------------------------------------------
Packets Octets
Forwarding Engine Stats
Dropped : 0 0
Off. HiPrio : 0 0
Off. LowPrio : 0 0
Off. Uncolor : 0 0
Queueing Stats(Ingress QoS Policy 1)
Dro. HiPrio : 0 0
Dro. LowPrio : 0 0
For. InProf : 0 0
For. OutProf : 0 0
Queueing Stats(Egress QoS Policy 1)
Dro. InProf : 0 0
Dro. OutProf : 0 0
For. InProf : 0 0
For. OutProf : 0 0
-------------------------------------------------------------------------------
Sap per Queue stats
-------------------------------------------------------------------------------
Packets Octets
Ingress Queue 1 (Unicast) (Priority)
Off. HiPrio : 0 0
Off. LoPrio : 0 0
Dro. HiPrio : 0 0
Dro. LoPrio : 0 0
For. InProf : 0 0
For. OutProf : 0 0
Ingress Queue 11 (Multipoint) (Priority)
Off. HiPrio : 0 0
Off. LoPrio : 0 0
Dro. HiPrio : 0 0
Dro. LoPrio : 0 0
For. InProf : 0 0
For. OutProf : 0 0
Egress Queue 1
For. InProf : 0 0
For. OutProf : 0 0
Dro. InProf : 0 0
Dro. OutProf : 0 0
-------------------------------------------------------------------------------
VPLS Rapid Spanning Tree Information
-------------------------------------------------------------------------------
VPLS oper state : Down Core Connectivity : Down
Rstp Admin State : Up Rstp Oper State : Down
Mode : Rstp Vcp Active Prot. : N/A
Bridge Id : 80:01.14:30:ff:00:00:01 Bridge Instance Id: 1
Bridge Priority : 32768 Tx Hold Count : 6
Topology Change : Inactive Bridge Hello Time : 2
Last Top. Change : 0d 00:00:00 Bridge Max Age : 20
Top. Change Count : 0 Bridge Fwd Delay : 15
Root Bridge : N/A
Primary Bridge : N/A
Root Path Cost : 0 Root Forward Delay: 15
Rcvd Hello Time : 2 Root Max Age : 20
Root Priority : 32769 Root Port : N/A
-------------------------------------------------------------------------------
Forwarding Database specifics
-------------------------------------------------------------------------------
Service Id : 9000 Mac Move : Disabled
Mac Move Rate : 10 Mac Move Timeout : 10
Table Size : 250 Total Count : 0
Learned Count : 0 Static Count : 0
Remote Age : 900 Local Age : 300
High WaterMark : 95% Low Watermark : 90%
Mac Learning : Enabl Discard Unknown : Dsabl
Mac Aging : Enabl
===============================================================================
*A:ALA-48#
arp [ip-address] | [mac
ieee-address] | [sap
sap-id] | [interface
ip-int-name]
A:ALA-12# show service id 2 arp
==============================================================================
ARP Table
==============================================================================
IP Address MAC Address Type Age Interface Port
------------------------------------------------------------------------------
190.11.1.1 00:03:fa:00:08:22 Other 00:00:00 ies-100-190.11.1 1/1/11:0
==============================================================================
A:ALA-12#
arp-host [wholesaler
service-id] [sap
sap-id | interface
interface-name | ip-address
ip-address[/mask] | mac
ieee-address | {[port
port-id] [no-inter-dest-id
| inter-dest-id
inter-dest-id]}] [detail
]
*A:Dut-C# show service id 2 arp-host
===============================================================================
ARP host table, service 2
===============================================================================
IP Address Mac Address Sap Id Remaining MC
Time Stdby
-------------------------------------------------------------------------------
128.128.1.2 00:80:00:00:00:01 2/1/5:2 00h04m41s
128.128.1.3 00:80:00:00:00:02 2/1/5:2 00h04m42s
128.128.1.4 00:80:00:00:00:03 2/1/5:2 00h04m43s
128.128.1.5 00:80:00:00:00:04 2/1/5:2 00h04m44s
128.128.1.6 00:80:00:00:00:05 2/1/5:2 00h04m45s
128.128.1.7 00:80:00:00:00:06 2/1/5:2 00h04m46s
128.128.1.8 00:80:00:00:00:07 2/1/5:2 00h04m47s
128.128.1.9 00:80:00:00:00:08 2/1/5:2 00h04m48s
128.128.1.10 00:80:00:00:00:09 2/1/5:2 00h04m49s
128.128.1.11 00:80:00:00:00:0a 2/1/5:2 00h04m50s
-------------------------------------------------------------------------------
Number of ARP hosts : 10
===============================================================================
*A:Dut-C#
*A:Dut-C# show service id 2 arp-host ip-address 128.128.1.2 detail
===============================================================================
ARP hosts for service 2
===============================================================================
Service ID : 2
IP Address : 128.128.1.2
MAC Address : 00:80:00:00:00:01
SAP : 2/1/5:2
Remaining Time : 00h04m58s
Sub-Ident : "alu_1_2"
Sub-Profile-String : ""
SLA-Profile-String : ""
App-Profile-String : ""
ARP host ANCP-String : ""
ARP host Int Dest Id : ""
RADIUS-User-Name : "128.128.1.2"
Session Timeout (s) : 301
Start Time : 02/09/2009 16:35:07
Last Auth : 02/09/2009 16:36:34
Last Refresh : 02/09/2009 16:36:38
Persistence Key : N/A
-------------------------------------------------------------------------------
Number of ARP hosts : 1
===============================================================================
*A:Dut-C#
*A:Dut-C# show service id 2 arp-host statistics
==============================================================================
ARP host statistics
==============================================================================
Num Active Hosts : 20
Received Triggers : 70
Ignored Triggers : 10
Ignored Triggers (overload) : 0
SHCV Checks Forced : 0
Hosts Created : 20
Hosts Updated : 40
Hosts Deleted : 0
Authentication Requests Sent : 40
==============================================================================
*A:Dut-C#
*A:Dut-C# show service id 2 arp-host summary
=============================================================
ARP host Summary, service 2
=============================================================
Sap Used Provided Admin State
-------------------------------------------------------------
sap:2/1/5:2 20 8000 inService
-------------------------------------------------------------
Number of SAPs : 1
-------------------------------------------------------------
=============================================================
*A:Dut-C#
*A:ALA-48>show>service>id# base
===============================================================================
Service Basic Information
===============================================================================
Service Id : 750 Vpn Id : 750
Service Type : VPLS
Description : Distributed VPLS services.
Customer Id : 7
Last Status Change: 04/11/2007 09:36:33
Last Mgmt Change : 04/11/2007 09:36:36
Admin State : Down Oper State : Down
MTU : 1514 Def. Mesh VC Id : 750
SAP Count : 1 SDP Bind Count : 2
-------------------------------------------------------------------------------
Service Access & Destination Points
-------------------------------------------------------------------------------
Identifier Type AdmMTU OprMTU Adm Opr
-------------------------------------------------------------------------------
sap:1/1/7:0 q-tag 1518 1518 Up Down
sdp:1:22 S(10.10.10.49) TLDP 0 0 Up Down
sdp:8:750 M(10.10.10.104) TLDP 0 0 Up Down
===============================================================================
*A:ALA-48>show>service>id#
fdb [
sap sap-id] | [
sdp sdp-id] | [
mac ieee-address] | [
detail]
*A:ALA-48>show>service>id# fdb mac
===============================================================================
Service Forwarding Database
===============================================================================
ServId MAC Source-Identifier Type/Age Last Change
-------------------------------------------------------------------------------
6 00:aa:00:00:00:00 sap:lag-2 L/0 04/11/2007
15:04:31
6 00:aa:00:00:00:01 sap:lag-2 L/0 04/11/2007
15:04:31
6 00:aa:00:00:00:02 sap:lag-2 L/0 04/11/2007
15:04:31
6 00:aa:00:00:00:03 sap:lag-2 L/0 04/11/2007
15:04:31
6 00:aa:00:00:00:04 sap:lag-2 L/0 04/11/2007
15:04:31
10 12:12:12:12:12:12 sap:1/1/1:100 S 04/11/2007
10:03:29
===============================================================================
*A:ALA-48>show>service>id#
*A:ALA-48>config>service>vpls>sap# show service id 700 host sap 1/1/9:0
===============================================================================
Static Hosts for service 700
===============================================================================
Sap IP Address Configured MAC Dynamic MAC
Subscriber
-------------------------------------------------------------------------------
1/1/9:0 10.10.10.104 N/A N/A
N/A
-------------------------------------------------------------------------------
Number of static hosts : 1
===============================================================================
*A:ALA-48>config>service>vpls>sap#
A:ALA-12# show service id 1 labels
==============================================================================
Martini Service Labels
==============================================================================
Svc Id Sdp Id Type I.Lbl E.Lbl
------------------------------------------------------------------------------
1 10:1 Mesh 0 0
1 20:1 Mesh 0 0
1 30:1 Mesh 0 0
1 40:1 Mesh 130081 131061
1 60:1 Mesh 131019 131016
1 100:1 Mesh 0 0
------------------------------------------------------------------------------
Number of Bound SDPs : 6
------------------------------------------------------------------------------
A:ALA-12#
A:ALA-1>show>service>id # mfib
===============================================================================
IGMP Snooping MFIB for service 10
===============================================================================
Source Address Group Address Sap/Sdp Id Fwd/Blk
-------------------------------------------------------------------------------
* 225.0.0.1 sap:2/1/5:1 Fwd
* 225.0.0.7 sap:2/1/5:7 Fwd
-------------------------------------------------------------------------------
Number of entries: 2
*A:rbae_C# show service id 1 mfib statistics
===============================================================================
Multicast FIB Statistics, Service 1
===============================================================================
Source Address Group Address Matched Pkts Matched Octets
-------------------------------------------------------------------------------
* * 838 50280
11.11.0.0 225.0.0.0 8 480
11.11.0.0 225.0.0.1 0 0
* * (MLD) 0 0
* 33:33:00:00:00:01 2650 159000
* 33:33:00:00:00:02 0 0
-------------------------------------------------------------------------------
Number of entries: 6
===============================================================================
*A:rbae_C#
*A:rbae_C# show service id 1 mld-snooping all
===============================================================================
MLD Snooping info for service 1
-------------------------------------------------------------------------------
MLD Snooping Base info
-------------------------------------------------------------------------------
Admin State : Up
Querier : FE80::12 on SAP 2/1/5
-------------------------------------------------------------------------------
Sap/Sdp Oper MRtr Send Max Num MVR Num
Id State Port Queries Groups From-VPLS Groups
-------------------------------------------------------------------------------
sap:1/1/4 Up No Disabled No Limit Local 0
sap:2/1/5 Up Yes Disabled No Limit Local 0
sdp:31:1 Up No Disabled No Limit N/A 0
sdp:36:1 Up No Disabled No Limit N/A 0
-------------------------------------------------------------------------------
MLD Snooping Querier info
-------------------------------------------------------------------------------
Sap Id : 2/1/5
IP Address : FE80::12
Expires : 11s
Up Time : 0d 00:05:05
Version : 2
General Query Interval : 10s
Query Response Interval : 1.0s
Robust Count : 2
-------------------------------------------------------------------------------
MLD Snooping Multicast Routers
-------------------------------------------------------------------------------
MRouter
Sap/Sdp Id Up Time Expires Version
-------------------------------------------------------------------------------
FE80::12
2/1/5 0d 00:05:05 11s 2
-------------------------------------------------------------------------------
Number of mrouters: 1
-------------------------------------------------------------------------------
MLD Snooping Proxy-reporting DB
-------------------------------------------------------------------------------
Group Address
Mode Up Time Num Sources
-------------------------------------------------------------------------------
Number of groups: 0
-------------------------------------------------------------------------------
MLD Snooping SAP 1/1/4 Port-DB
-------------------------------------------------------------------------------
Group Address
Mode Type From-VPLS Up Time Expires Num MC
Src Stdby
-------------------------------------------------------------------------------
Number of groups: 0
-------------------------------------------------------------------------------
MLD Snooping SAP 2/1/5 Port-DB
-------------------------------------------------------------------------------
Group Address
Mode Type From-VPLS Up Time Expires Num MC
Src Stdby
-------------------------------------------------------------------------------
Number of groups: 0
-------------------------------------------------------------------------------
MLD Snooping SDP 31:1 Port-DB
-------------------------------------------------------------------------------
Group Address
Mode Type From-VPLS Up Time Expires Num Src
-------------------------------------------------------------------------------
Number of groups: 0
-------------------------------------------------------------------------------
MLD Snooping SDP 36:1 Port-DB
-------------------------------------------------------------------------------
Group Address
Mode Type From-VPLS Up Time Expires Num Src
-------------------------------------------------------------------------------
Number of groups: 0
-------------------------------------------------------------------------------
MLD Snooping Static Source Groups
-------------------------------------------------------------------------------
MLD Snooping Statistics
-------------------------------------------------------------------------------
Message Type Received Transmitted Forwarded
-------------------------------------------------------------------------------
General Queries 43 0 129
Group Queries 0 0 0
Group-Source Queries 0 0 0
V1 Reports 0 0 0
V2 Reports 4 35 0
V1 Done 0 0 0
Unknown Type 0 N/A 0
-------------------------------------------------------------------------------
Drop Statistics
-------------------------------------------------------------------------------
Bad Length : 0
Bad MLD Checksum : 0
Bad Encoding : 0
No Router Alert : 0
Zero Source IP : 0
Wrong Version : 0
Lcl-Scope Packets : 0
Rsvd-Scope Packets : 0
Send Query Cfg Drops : 0
Import Policy Drops : 0
Exceeded Max Num Groups : 0
MCAC Policy Drops : 0
MCS Failures : 0
MVR From VPLS Cfg Drops : 0
MVR To SAP Cfg Drops : 0
-------------------------------------------------------------------------------
MLD Snooping Multicast VPLS Registration info
-------------------------------------------------------------------------------
MLD Snooping Admin State : Up
MVR Admin State : Down
MVR Policy : None
-------------------------------------------------------------------------------
Local SAPs/SDPs
-------------------------------------------------------------------------------
Svc Id Sap/Sdp Oper From Num Local
Id State VPLS Groups
-------------------------------------------------------------------------------
1 sap:1/1/4 Up Local 0
1 sap:2/1/5 Up Local 0
1 sdp:31:1 Up N/A 0
1 sdp:36:1 Up N/A 0
-------------------------------------------------------------------------------
MVR SAPs (from-vpls=1)
-------------------------------------------------------------------------------
Svc Id Sap/Sdp Oper From Num MVR
Id State VPLS Groups
-------------------------------------------------------------------------------
No MVR SAPs found.
===============================================================================
*A:rbae_C#
*A:rbae_C# show service id 1 mld-snooping mrouters
===============================================================================
MLD Snooping Multicast Routers for service 1
===============================================================================
MRouter
Sap/Sdp Id Up Time Expires Version
-------------------------------------------------------------------------------
FE80::12
2/1/5 0d 00:05:55 11s 2
-------------------------------------------------------------------------------
Number of mrouters: 1
===============================================================================
*A:rbae_C#
*A:rbae_C# show service id 1 mld-snooping mrouters detail
===============================================================================
MLD Snooping Multicast Routers for service 1
-------------------------------------------------------------------------------
MRouter FE80::12
-------------------------------------------------------------------------------
Sap Id : 2/1/5
Expires : 18s
Up Time : 0d 00:06:28
Version : 2
-------------------------------------------------------------------------------
Number of mrouters: 1
===============================================================================
*A:rbae_C# show service id 1 mld-snooping port-db sap 1/1/4
===============================================================================
MLD Snooping SAP 1/1/4 Port-DB for service 1
===============================================================================
Group Address
Mode Type From-VPLS Up Time Expires Num MC
Src Stdby
-------------------------------------------------------------------------------
FF04::1
include dynamic local 0d 00:00:19 0s 1
FF04::2
include dynamic local 0d 00:00:18 0s 1
-------------------------------------------------------------------------------
Number of groups: 2
===============================================================================
*A:rbae_C#
*A:rbae_C# show service id 1 mld-snooping port-db sap 1/1/4 detail
===============================================================================
MLD Snooping SAP 1/1/4 Port-DB for service 1
-------------------------------------------------------------------------------
MLD Group FF04::1
-------------------------------------------------------------------------------
Mode : include Type : dynamic
Up Time : 0d 00:00:33 Expires : 0s
Compat Mode : MLD Version 2
V1 Host Expires : 0s :
MVR From-VPLS : local MVR To-SAP : local
MC Standby : no
-------------------------------------------------------
Source Address
Up Time Expires Type Fwd/Blk
-------------------------------------------------------
2011::1
0d 00:00:33 20s dynamic Fwd
-------------------------------------------------------------------------------
MLD Group FF04::2
-------------------------------------------------------------------------------
Mode : include Type : dynamic
Up Time : 0d 00:00:32 Expires : 0s
Compat Mode : MLD Version 2
V1 Host Expires : 0s :
MVR From-VPLS : local MVR To-SAP : local
MC Standby : no
-------------------------------------------------------
Source Address
Up Time Expires Type Fwd/Blk
-------------------------------------------------------
2011::1
0d 00:00:33 20s dynamic Fwd
-------------------------------------------------------------------------------
Number of groups: 2
===============================================================================
*A:rbae_C#
*A:rbae_C# show service id 1 mld-snooping proxy-db
===============================================================================
MLD Snooping Proxy-reporting DB for service 1
===============================================================================
Group Address
Mode Up Time Num Sources
-------------------------------------------------------------------------------
FF04::1
include 0d 00:01:01 1
FF04::2
include 0d 00:01:00 1
-------------------------------------------------------------------------------
Number of groups: 2
===============================================================================
*A:rbae_C#
*A:rbae_C# show service id 1 mld-snooping proxy-db detail
===============================================================================
MLD Snooping Proxy-reporting DB for service 1
-------------------------------------------------------------------------------
MLD Group FF04::1
-------------------------------------------------------------------------------
Up Time : 0d 00:01:03 Mode : include
---------------------------------------------------------------------------
Source Address Up Time
---------------------------------------------------------------------------
2011::1 0d 00:01:03
-------------------------------------------------------------------------------
MLD Group FF04::2
-------------------------------------------------------------------------------
Up Time : 0d 00:01:02 Mode : include
---------------------------------------------------------------------------
Source Address Up Time
---------------------------------------------------------------------------
2011::1 0d 00:01:02
-------------------------------------------------------------------------------
Number of groups: 2
===============================================================================
*A:rbae_C#
*A:rbae_C# show service id 1 mld-snooping querier
===============================================================================
MLD Snooping Querier info for service 1
===============================================================================
Sap Id : 2/1/5
IP Address : FE80::12
Expires : 11s
Up Time : 0d 00:13:35
Version : 2
General Query Interval : 10s
Query Response Interval : 1.0s
Robust Count : 2
===============================================================================
*A:rbae_C#
static [sap
sap-id | sdp
sdp-id:vc-id]
*A:rbae_C# show service id 1 mld-snooping static
===============================================================================
MLD Snooping Static Source Groups for service 1
-------------------------------------------------------------------------------
MLD Snooping Static Source Groups for SDP 36:1
-------------------------------------------------------------------------------
Source
Group
-------------------------------------------------------------------------------
2011::1
FF04::2
*
FF04::3
-------------------------------------------------------------------------------
Static (*,G)/(S,G) entries: 2
===============================================================================
*A:rbae_C#
*A:rbae_C# show service id 1 mld-snooping statistics
===============================================================================
MLD Snooping Statistics for service 1
===============================================================================
Message Type Received Transmitted Forwarded
-------------------------------------------------------------------------------
General Queries 109 0 327
Group Queries 0 0 0
Group-Source Queries 0 0 0
V1 Reports 0 0 0
V2 Reports 438 87 0
V1 Done 0 0 0
Unknown Type 0 N/A 0
-------------------------------------------------------------------------------
Drop Statistics
-------------------------------------------------------------------------------
Bad Length : 0
Bad MLD Checksum : 0
Bad Encoding : 0
No Router Alert : 0
Zero Source IP : 0
Wrong Version : 0
Lcl-Scope Packets : 0
Rsvd-Scope Packets : 0
Send Query Cfg Drops : 0
Import Policy Drops : 0
Exceeded Max Num Groups : 0
MCAC Policy Drops : 0
MCS Failures : 0
MVR From VPLS Cfg Drops : 0
MVR To SAP Cfg Drops : 0
===============================================================================
*A:rbae_C#
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Specifies an Ethernet type II Ethertype value.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Max Nbr of MAC Addr: No Limit Total MAC Addr : 0
Learned MAC Addr : 0 Static MAC Addr : 0
Admin MTU : 1518 Oper MTU : 1518
Ingress qos-policy : 1 Egress qos-policy : 1
Ingress Filter-Id : n/a Egress Filter-Id : n/a
Mac Learning : Enabled Discard Unkwn Srce: Disabled
Mac Aging : Enabled
Multi Svc Site : West
E. Sched Pol : SLA1
Acct. Pol : None Collect Stats : Disabled
===============================================================================
*A:ALA-48>show>service>id#
*A:ALA-48>show>service>id# sap 1/1/7:0 detail
===============================================================================
Service Access Points(SAP)
===============================================================================
Service Id : 750
SAP : 1/1/7:0 Encap : q-tag
Dot1Q Ethertype : 0x8100 QinQ Ethertype : 0x8100
Admin State : Up Oper State : Down
Flags : PortOperDown
Last Status Change : 04/09/2007 09:23:26
Last Mgmt Change : 04/09/2007 09:23:28
Max Nbr of MAC Addr: No Limit Total MAC Addr : 0
Learned MAC Addr : 0 Static MAC Addr : 0
Admin MTU : 1518 Oper MTU : 1518
Ingress qos-policy : 100 Egress qos-policy : 1
Shared Q plcy : default Multipoint shared : Enabled
Ingr IP Fltr-Id : n/a Egr IP Fltr-Id : 10
Ingr Mac Fltr-Id : n/a Egr Mac Fltr-Id : n/a
Ingr IPv6 Fltr-Id : n/a Egr IPv6 Fltr-Id : n/a
tod-suite : None qinq-pbit-marking : both
ARP Reply Agent : Enabled Host Conn Verify : Enabled
Mac Learning : Enabled Discard Unkwn Srce: Disabled
Mac Aging : Enabled Mac Pinning : Disabled
L2PT Termination : Disabled BPDU Translation : Disabled
Multi Svc Site : None
I. Sched Pol : SLA1
E. Sched Pol : SLA1
Acct. Pol : None Collect Stats : Disabled
Anti Spoofing : None Nbr Static Hosts : 1
MCAC Policy Name : MCAC Const Adm St : Enable
MCAC Max Unconst BW: no limit MCAC Max Mand BW : no limit
MCAC In use Mand BW: 0 MCAC Avail Mand BW: unlimited
MCAC In use Opnl BW: 0 MCAC Avail Opnl BW: unlimited
Auth Policy : none
Egr MCast Grp :
--------------------------------------------------------------------------
Rstp Service Access Point specifics
-------------------------------------------------------------------------------
Mac Move : Blockable
Rstp Admin State : Up Rstp Oper State : Down
Core Connectivity : Down
Port Role : N/A Port State : Discarding
Port Number : 2048 Port Priority : 128
Port Path Cost : 10 Auto Edge : Enabled
Admin Edge : Disabled Oper Edge : N/A
Link Type : Pt-pt BPDU Encap : Dot1d
Designated Bridge : N/A Designated Port Id: 0
Active Protocol : N/A
Forward transitions: 0 Bad BPDUs rcvd : 0
Cfg BPDUs rcvd : 0 Cfg BPDUs tx : 0
TCN BPDUs rcvd : 0 TCN BPDUs tx : 0
RST BPDUs rcvd : 0 RST BPDUs tx : 0
-------------------------------------------------------------------------------
Sap Statistics
-------------------------------------------------------------------------------
Packets Octets
Forwarding Engine Stats
Dropped : 0 0
Off. HiPrio : 0 0
Off. LowPrio : 0 0
Off. Uncolor : 0 0
Queueing Stats(Ingress QoS Policy 1)
Dro. HiPrio : 0 0
Dro. LowPrio : 0 0
For. InProf : 0 0
For. OutProf : 0 0
Queueing Stats(Egress QoS Policy 1)
Dro. InProf : 0 0
Dro. OutProf : 0 0
For. InProf : 0 0
For. OutProf : 0 0
-------------------------------------------------------------------------------
Sap per Queue stats
-------------------------------------------------------------------------------
Packets Octets
Ingress Queue 1 (Unicast) (Priority)
Off. HiPrio : 0 0
Off. LoPrio : 0 0
Dro. HiPrio : 0 0
Dro. LoPrio : 0 0
For. InProf : 0 0
For. OutProf : 0 0
Ingress Queue 11 (Multipoint) (Priority)
Off. HiPrio : 0 0
Off. LoPrio : 0 0
Dro. HiPrio : 0 0
Dro. LoPrio : 0 0
For. InProf : 0 0
For. OutProf : 0 0
Egress Queue 1
For. InProf : 0 0
For. OutProf : 0 0
Dro. InProf : 0 0
Dro. OutProf : 0 0
===============================================================================
*A:ALA-48>show>service>id#
sdp [sdp-id | far-end
ip-addr] [detail
]
A:ALA-12# show service id 9000 sdp 2:22 detail
===============================================================================
Service Destination Point (Sdp Id : 2:22) Details
-------------------------------------------------------------------------------
Sdp Id 2:22 -(10.10.10.103)
-------------------------------------------------------------------------------
Description : GRE-10.10.10.103
SDP Id : 2:22 Type : Spoke
Split Horiz Grp : (DSL-group1
VC Type : Ether VC Tag : n/a
Admin Path MTU : 4462 Oper Path MTU : 4462
Far End : 10.10.10.103 Delivery : GRE
Admin State : Up Oper State : TLDP Down
Ingress Label : 0 Egress Label : 0
Ingress Filter : n/a Egress Filter : n/a
Last Changed : 04/11/2007 11:48:20 Signaling : TLDP
KeepAlive Information :
Admin State : Disabled Oper State : Disabled
Hello Time : 10 Hello Msg Len : 0
Max Drop Count : 3 Hold Down Time : 10
Statistics :
I. Fwd. Pkts. : 0 I. Dro. Pkts. : 0
E. Fwd. Pkts. : 0 E. Fwd. Octets : 0
Associated LSP LIST :
SDP Delivery Mechanism is not MPLS
-------------------------------------------------------------------------------
Rstp Service Destination Point specifics
-------------------------------------------------------------------------------
Mac Move : Disabled
Rstp Admin State : Up Rstp Oper State : Down
Core Connectivity : Down
Port Role : N/A Port State : Discarding
Port Number : 2049 Port Priority : 128
Port Path Cost : 10 Auto Edge : Enabled
Admin Edge : Disabled Oper Edge : N/A
Link Type : Pt-pt BPDU Encap : Dot1d
Designated Bridge : N/A Designated Port Id: 0
Active Protocol : N/A
Fwd Transitions : 0 Bad BPDUs rcvd : 0
Cfg BPDUs rcvd : 0 Cfg BPDUs tx : 0
TCN BPDUs rcvd : 0 TCN BPDUs tx : 0
RST BPDUs rcvd : 0 RST BPDUs tx : 0
-------------------------------------------------------------------------------
Number of SDPs : 1
===============================================================================
A:ALA-12#
A:active>show>service>id>gsmp# neighbors
============================================================================
GSMP neighbors
============================================================================
Group Neighbor AdminState Sessions
----------------------------------------------------------------------------
dslam1 192.168.1.2 Enabled 0
dslam1 192.168.1.3 Enabled 0
----------------------------------------------------------------------------
Number of neighbors shown: 2
============================================================================
A:active>show>service>id>gsmp#
A:active>show>service>id>gsmp# neighbors group dslam1
============================================================================
GSMP neighbors
============================================================================
Group Neighbor AdminState Sessions
----------------------------------------------------------------------------
dslam1 192.168.1.2 Enabled 0
dslam1 192.168.1.3 Enabled 0
----------------------------------------------------------------------------
Number of neighbors shown: 2
============================================================================
A:active>show>service>id>gsmp#
A:active>show>service>id>gsmp# neighbors group dslam1 192.168.1.2
============================================================================
GSMP neighbors
============================================================================
Group Neighbor AdminState Sessions
----------------------------------------------------------------------------
dslam1 192.168.1.2 Enabled 0
============================================================================
A:active>show>service>id>gsmp#
sessions [group
name] neighbor
ip-address] [ port
port-number] [association
] [statistics
]
A:active>show>service>id>gsmp# sessions
=======================================================
GSMP sessions for service 999 (VPRN)
=======================================================
Port Ngbr-IpAddr Gsmp-Group
-------------------------------------------------------
40590 192.168.1.2 dslam1
-------------------------------------------------------
Number of GSMP sessions : 1
=======================================================
A:active>show>service>id>gsmp#
A:active>show>service>id>gsmp# sessions neighbor 192.168.1.2 port 40590
=========================================================================
GSMP sessions for service 999 (VPRN), neighbor 192.168.1.2, Port 40590
=========================================================================
State : Established
Peer Instance : 1 Sender Instance : a3cf58
Peer Port : 0 Sender Port : 0
Peer Name : 12:12:12:12:12:12 Sender Name : 00:00:00:00:00:00
timeouts : 0 Max. Timeouts : 3
Peer Timer : 100 Sender Timer : 100
Capabilities : DTD OAM
Conf Capabilities : DTD OAM
Priority Marking : dscp nc2
Local Addr. : 192.168.1.4
Conf Local Addr. : N/A
=========================================================================
A:active>show>service>id>gsmp#
A:active>show>service>id>gsmp# sessions neighbor 192.168.1.2 port 40590 association
===============================================================================
ANCP-Strings
===============================================================================
ANCP-String Assoc. State
-------------------------------------------------------------------------------
No ANCP-Strings found
===============================================================================
A:active>show>service>id>gsmp#
A:active>show>service>id>gsmp# sessions neighbor 192.168.1.2 port 40590 statistics
===============================================================
GSMP session stats, service 999 (VPRN), neigbor 192.168.1.2, Port 40590
===============================================================
Event Received Transmitted
---------------------------------------------------------------
Dropped 0 0
Syn 1 1
Syn Ack 1 1
Ack 14 14
Rst Ack 0 0
Port Up 0 0
Port Down 0 0
OAM Loopback 0 0
===============================================================
A:active>show>service>id>gsmp#
A:active>show>service>id>gsmp# sessions neighbor 192.168.1.2 port 40590 association
===============================================================================
ANCP-Strings
===============================================================================
ANCP-String Assoc.
State
-------------------------------------------------------------------------------
7330-ISAM-E47 atm 1/1/01/01:19425.64048 ANCP Up
-------------------------------------------------------------------------------
Number of ANCP-Strings : 1
===============================================================================
A:active>show>service>id>gsmp
host [sap
sap-id] [wholesaler
service-id] [port
port-id] [inter-dest-id
intermediate-destination-id] [detail
]
host [sap
sap-id] [wholesaler
service-id] [port
port-id] no-inter-dest-id
[detail
]
Displays summary static host information.
interface [{[ip-address|ip-int-name] [interface-type] [detail
] [family
]}|summary
]
A:cses-E11>config>service>vprn# show service id 10 interface "gi-2-01" detail
===============================================================================
Interface Table
===============================================================================
-------------------------------------------------------------------------------
Interface
-------------------------------------------------------------------------------
If Name : gi-2-01
Sub If Name : si-2
Red If Name :
Admin State : Up Oper (v4/v6) : Up/Down
Protocols : None
-------------------------------------------------------------------------------
Details
-------------------------------------------------------------------------------
Description : (Not Specified)
If Index : 6 Virt. If Index : 6
Last Oper Chg: 11/27/2012 13:19:28 Global If Index : 380
Mon Oper Grp : None
Srrp En Rtng : Disabled Hold time : N/A
Group Port : 1/1/2
TOS Marking : Trusted If Type : VPRN Grp
SNTP B.Cast : False
MAC Address : d2:30:01:01:00:02 Mac Accounting : Disabled
Ingress stats: Disabled
Arp Timeout : 14400 IPv6 Nbr ReachTi*: 30
IP Oper MTU : 1500 ICMP Mask Reply : True
Arp Populate : Disabled Host Conn Verify : Disabled
Cflowd : None
LdpSyncTimer : None
LSR Load Bal*: system
uRPF Chk : disabled
uRPF Ipv6 Chk: disabled
Rx Pkts : 0 Rx Bytes : 0
Rx V4 Pkts : 0 Rx V4 Bytes : 0
Rx V6 Pkts : 0 Rx V6 Bytes : 0
Tx Pkts : 32 Tx Bytes : 3392
Tx V4 Pkts : 32 Tx V4 Bytes : 3392
Tx V4 Discar*: 0 Tx V4 Discard By*: 0
Tx V6 Pkts : 0 Tx V6 Bytes : 0
Tx V6 Discar*: 0 Tx V6 Discard By*: 0
Proxy ARP Details
Rem Proxy ARP: Disabled Local Proxy ARP : Disabled
Policies : none
Proxy Neighbor Discovery Details
Local Pxy ND : Disabled
Policies : none
DHCP no local server
DHCP Details
Description : (Not Specified)
Admin State : Down Lease Populate : 0
Gi-Addr : Not configured Gi-Addr as Src Ip: Disabled
Action : Keep Trusted : Disabled
DHCP Proxy Details
Admin State : Down
Lease Time : N/A
Emul. Server : Not configured
Subscriber Authentication Details
Auth Policy : None
DHCP6 Relay Details
Description : (Not Specified)
Admin State : Down Lease Populate : 0
Oper State : Down Nbr Resolution : Disabled
If-Id Option : None Remote Id : Disabled
Src Addr : Not configured
DHCP6 Server Details
Admin State : Down Max. Lease States: 8000
ISA Tunnel redundant next-hop information
Static Next-*:
Dynamic Next*:
ICMP Details
Redirects : Number - 100 Time (seconds) - 10
Unreachables : Number - 100 Time (seconds) - 10
TTL Expired : Number - 100 Time (seconds) - 10
IPCP Address Extension Details
Peer IP Addr*: Not configured
Peer Pri DNS*: Not configured
Peer Sec DNS*: Not configured
-------------------------------------------------------------------------------
Qos Details
-------------------------------------------------------------------------------
Ing Qos Poli*: (none) Egr Qos Policy : (none)
Ingress FP Q*: (none) Egress Port QGrp : (none)
Ing FP QGrp *: (none) Egr Port QGrp In*: (none)
-------------------------------------------------------------------------------
Interfaces : 1
===============================================================================
* indicates that the corresponding row element may have been truncated.
A:cses-E11>config>service>vprn#
*A:ALA-48>config# show service id 101 retailers
===============================================================================
Retailers for service 101
===============================================================================
Retailer Svc ID Num Static Hosts Num Dynamic Hosts
-------------------------------------------------------------------------------
102 3 1
105 0 1
-------------------------------------------------------------------------------
Number of retailers : 2
===============================================================================
*A:ALA-48>config#
*A:ALA-48>config# show service id 102 wholesalers
===============================================================================
Wholesalers for service 102
===============================================================================
Wholesaler Svc ID Num Static Hosts Num Dynamic Hosts
-------------------------------------------------------------------------------
101 3 1
-------------------------------------------------------------------------------
Number of wholesalers : 1
===============================================================================
*A:ALA-48>config#
*A:ALA-48>config# show service id 105 dhcp lease-state wholesaler 101
===============================================================================
DHCP lease state table, service 105
===============================================================================
IP Address Mac Address Sap/Sdp Id Remaining Lease MC
LifeTime Origin Stdby
-------------------------------------------------------------------------------
Wholesaler 101 Leases
-------------------------------------------------------------------------------
103.3.2.62 00:00:1f:bd:00:c6 lag-1:105 00h00m39s RADIUS
-------------------------------------------------------------------------------
Number of lease states : 1
===============================================================================
*A:ALA-48>config#
A:ALA-1# show service id 700 split-horizon-group
=============================================================================
Service: Split Horizon Group
=============================================================================
Name Description
-----------------------------------------------------------------------------
DSL-group1 Split horizon group for DSL
-----------------------------------------------------------------------------
No. of Split Horizon Groups: 1
=============================================================================
A:ALA-1#
A:ALA-1# show service id 700 split-horizon-group DSL-group1
===============================================================================
Service: Split Horizon Group
===============================================================================
Name Description
-------------------------------------------------------------------------------
DSL-group1 Split horizon group for DSL
-------------------------------------------------------------------------------
Associations
-------------------------------------------------------------------------------
SAP 1/1/3:1
SDP 108:1
SDP 109:1
-------------------------------------------------------------------------------
SAPs Associated : 1 SDPs Associated : 2
===============================================================================
A:ALA-1#
static-host [sap
sap-id] [wholesaler
service-id] [port
port-id][inter-dest-id
intermediate-destination-id] [detail
]
static-host [sap
sap-id ] [wholesaler
service-id ] [port
port-id] no-inter-dest-id
[detail
]
Displays summary static host information.
*A:ALA-48# show service id 88 static-host
===============================================================================
Static Hosts for service 88
===============================================================================
Sap IP Address Configured MAC Dynamic MAC
Subscriber Admin State Fwding State
-------------------------------------------------------------------------------
1/2/20:0 10.10.10.104 N/A N/A
N/A Down Not Fwding
3/2/4:50/5 143.144.145.1 N/A N/A
N/A Up Fwding
-------------------------------------------------------------------------------
Number of static hosts : 2
===============================================================================
*A:ALA-48#
A:ALA-12# show service id 1 stp
==============================================================================
Spanning Tree Information
==============================================================================
VPLS Spanning Tree Information
------------------------------------------------------------------------------
RSTP Admin State : Up RSTP Oper State : Down
Core Connectivity : Down
Bridge-id : 04:67:ff:00:00:01
Hold Timer : 1 Bridge fwd delay : 15
Bridge Hello time : 1 Bridge max age : 20
Bridge priority : 1 Topology change : Inactive
Last Top. change : 0d 00:00:00 Top. change count : 0
Root bridge-id : 00:03:fa:00:00:00
Root path cost : 1 Root forward delay: 15
Root hello time : 1 Root max age : 20
Root priority : 0 Root port : vcp
------------------------------------------------------------------------------
Spanning Tree Specifics
------------------------------------------------------------------------------
SAP Identifier : 1/1/7:0 RSTP State : Down
STP Port State : Forwarding BPDU encap : dot1d
Port Number : 2048 Priority : 128
Cost : 10 Fast Start : Disabled
Designated Port : 34816 Designated Bridge : 02:fa:00:04:54:01
==============================================================================
A:ALA-12#
*A:ALA-48# show service id 700 authentication statistics
================================================================
Authentication Statistics for service 700
================================================================
Client Packets Authenticate Fail : 0
Client Packets Authenticate Ok : 0
================================================================
*A:ALA-48#
subscriber-hosts [sap
sap-id] [ip
ip-address[/mask]] [mac
ieee-address] [sub-profile
sub-profile-name] [sla-profile
sla-profile-name] [detail
]
Shows information for the specified IP address and mask.
*A:Dut-C># show service id 3 subscriber-hosts
=============================================================
Subscriber Host table
=============================================================
Sap Subscriber
IP Address
MAC Address PPPoE-SID Origin Fwding State
-------------------------------------------------------------
2/1/5:2 TEACAHEH74
11.11.1.61
00:80:00:00:00:0a N/A ARP-Host Fwding
[pw-11:11] VIACAHEH74
11.11.1.2
00:00:11:11:01:02 N/A ARP-Host Fwding
[pw-11:12] pw-11:12
11.11.1.3
00:00:11:11:01:03 N/A ARP-Host Fwding
[pw-11:13] pw-11:13
11.11.1.4
00:00:11:11:01:04 N/A ARP-Host Fwding
[pw-22:22] XMACAHEH74
22.22.1.2
00:00:22:22:01:02 N/A ARP-Host Fwding
[pw-33:33] IUASAHEH74
33.33.1.2
00:00:33:33:01:02 N/A ARP-Host Fwding
-------------------------------------------------------------
Number of subscriber hosts: 6
=============================================================
*A:Dut-C>#
A:Dut-A# show service id 100 subscriber-hosts ip 10.100.1.5
===============================================================================
Subscriber Host table
===============================================================================
Sap IP Address MAC Address Origin(*) Subscriber
-------------------------------------------------------------------------------
1/2/1:102 10.100.1.5 00:10:00:00:00:03 -/D/- alcatel_100
-------------------------------------------------------------------------------
Number of subscriber hosts : 1
===============================================================================
(*) S=Static Host, D=DHCP Lease, N=Non-Sub-Traffic
A:Dut-A#
sdp sdp-id pw-port
[pw-port-id]
sdp sdp-id pw-port
[pw-port-id] [statistics]
sdp [consistent | inconsistent | na] egressifs
sdp sdp-id keep-alive-history
sdp far-end ip-address | ipv6-address keep-alive-history
============================================================================
*A:ALA-12>config>service# show service sdp 1 pw-port
===============================================================================
Service Destination Point (sdp Id 1 Pw-Port)
===============================================================================
Pw-port VC-Id Adm Encap Opr VC Type Egr Monitor
Shaper Oper
VPort Group
-------------------------------------------------------------------------------
1 1 up dot1q up ether
2 2 up qinq up ether
3 3 up dot1q up ether
4 4 up qinq up ether
-------------------------------------------------------------------------------
Entries found : 4
===============================================================================
*A:ALA-12>config>service# show service sdp 1 pw-port 3
===============================================================================
Service Destination Point (Sdp Id 1 Pw-Port 3)
===============================================================================
SDP Binding port : lag-1
VC-Id : 3 Admin Status : up
Encap : dot1q Oper Status : up
VC Type : ether
Oper Flags : (Not Specified)
Monitor Oper-Group : (Not Specified)
===============================================================================
*A:ALA-12>config>service# show service sdp 1 pw-port 3 statistics
===============================================================================
Service Destination Point (Sdp Id 1 Pw-Port 3)
===============================================================================
SDP Binding port : lag-1
VC-Id : 3 Admin Status : up
Encap : dot1q Oper Status : up
VC Type : ether
Oper Flags : (Not Specified)
Monitor Oper-Group : (Not Specified)
Statistics :
I. Fwd. Pkts. : 0 I. Dro. Pkts. : 0
I. Fwd. Octs. : 0 I. Dro. Octs. : 0
E. Fwd. Pkts. : 0 E. Fwd. Octets : 0
===============================================================================
subscriber-using [service-id
service-id] [sap-id
sap-id] [interface
ip-int-name] [ip
ip-address[/mask]] [mac
ieee-address] [sub-profile
sub-profile-name] [sla-profile
sla-profile-name] [app-profile
app-profile-name] [port
port-id] [no-inter-dest-id
| inter-dest-id
intermediate-destination-id]
A:Dut-A# show service subscriber-using service-id 100
=================================================================
Subscribers
=================================================================
Subscriber Sub Profile
-----------------------------------------------------------------
alcatel_100 sub_prof100
-----------------------------------------------------------------
Matching Subscribers : 1
=================================================================
A:Dut-A#
A:Dut-A# show service subscriber-using
=================================================================
Subscribers
=================================================================
Subscriber Sub Profile
-----------------------------------------------------------------
alcatel_100 sub_prof100
alcatel_110 sub_prof110
alcatel_120 sub_prof120
alcatel_130 sub_prof130
alcatel_80 sub_prof80
alcatel_90 sub_prof90
client_PC1 sub_profPC1
static sub_default
-----------------------------------------------------------------
Matching Subscribers : 8
=================================================================
A:Dut-A#
multi-chassis mc-lag [peer
ip-address [lag
lag-id]] statistics
multi-chassis sync
[peer
ip-address] [detail
]
A:pc1# show redundancy multi-chassis all
===============================================================================
Multi-Chassis Peers
===============================================================================
Peer IP Src IP Auth Peer Admin
MCS Admin MCS Oper MCS State MC-LAG Admin MC-LAG Oper
-------------------------------------------------------------------------------
10.10.10.102 10.10.10.101 hash Enabled
Enabled Enabled inSync Enabled Enabled
10.10.20.1 0.0.0.0 None Disabled
-- -- -- Disabled Disabled
===============================================================================
A:pc1#
*A:Dut-C# show redundancy multi-chassis mc-lag peer 10.10.10.1
===============================================================================
Multi-Chassis MC-Lag Peer 10.10.10.1
===============================================================================
Last State chg : 09/24/2007 07:58:03
Admin State : Up Oper State : Up
KeepAlive : 10 deci-seconds Hold On Ngbr Failure : 3
-------------------------------------------------------------------------------
Lag Id Lacp Key Remote Lag Id System Id Sys Prio Last State Changed
-------------------------------------------------------------------------------
1 32666 1 00:00:00:33:33:33 32888 09/24/2007 07:56:35
-------------------------------------------------------------------------------
Number of LAGs : 1
===============================================================================
*A:Dut-C#
A:pc1# show redundancy multi-chassis mc-lag statistics
===============================================================================
Multi-Chassis Statistics
===============================================================================
Packets Rx : 129816
Packets Rx Keepalive : 129798
Packets Rx Config : 3
Packets Rx Peer Config : 5
Packets Rx State : 10
Packets Dropped KeepaliveTask : 0
Packets Dropped Packet Too Short : 0
Packets Dropped Verify Failed : 0
Packets Dropped Tlv Invalid Size : 0
Packets Dropped Out of Seq : 0
Packets Dropped Unknown Tlv : 0
Packets Dropped Tlv Invalid LagId : 0
Packets Dropped MD5 : 0
Packets Dropped Unknown Peer : 0
Packets Tx : 77918
Packets Tx Keepalive : 77879
Packets Tx Config : 6
Packets Tx Peer Config : 26
Packets Tx State : 7
Packets Tx Failed : 0
===============================================================================
A:pc1#
A:pc1# show redundancy multi-chassis mc-lag peer 10.10.10.102 lag 2 statistics
===============================================================================
Multi-Chassis Statistics, Peer 10.10.10.102 Lag 2
===============================================================================
Packets Rx Config : 1
Packets Rx State : 4
Packets Tx Config : 2
Packets Tx State : 3
Packets Tx Failed : 0
===============================================================================
A:pc1#
A:pc1#show redundancy multi-chassis mc-lag peer 10.10.10.102 statistics
===============================================================================
Multi-Chassis Statistics, Peer 10.10.10.102
===============================================================================
Packets Rx : 129918
Packets Rx Keepalive : 129900
Packets Rx Config : 3
Packets Rx Peer Config : 5
Packets Rx State : 10
Packets Dropped State Disabled : 0
Packets Dropped Packets Too Short : 0
Packets Dropped Tlv Invalid Size : 0
Packets Dropped Tlv Invalid LagId : 0
Packets Dropped Out of Seq : 0
Packets Dropped Unknown Tlv : 0
Packets Dropped MD5 : 0
Packets Tx : 77979
Packets Tx Keepalive : 77940
Packets Tx Peer Config : 26
Packets Tx Failed : 0
===============================================================================
A:pc1#
A:pc1# show redundancy multi-chassis sync
===============================================================================
Multi-chassis Peer Table
===============================================================================
Peer
-------------------------------------------------------------------------------
Peer IP Address : 10.10.10.102
Description : CO1
Authentication : Enabled
Source IP Address : 10.10.10.101
Admin State : Enabled
-------------------------------------------------------------------------------
Sync-status
-------------------------------------------------------------------------------
Client Applications :
Sync Admin State : Up
Sync Oper State : Up
DB Sync State : inSync
Num Entries : 0
Lcl Deleted Entries : 0
Alarm Entries : 0
Rem Num Entries : 0
Rem Lcl Deleted Entries : 0
Rem Alarm Entries : 0
===============================================================================
Peer
-------------------------------------------------------------------------------
Peer IP Address : 10.10.20.1
Authentication : Disabled
Source IP Address : 0.0.0.0
Admin State : Disabled
===============================================================================
A:pc1#
pc1# show redundancy multi-chassis sync peer 10.10.10.102
===============================================================================
Multi-chassis Peer Table
===============================================================================
Peer
-------------------------------------------------------------------------------
Peer IP Address : 10.10.10.102
Description : CO1
Authentication : Enabled
Source IP Address : 10.10.10.101
Admin State : Enabled
-------------------------------------------------------------------------------
Sync-status
-------------------------------------------------------------------------------
Client Applications :
Sync Admin State : Up
Sync Oper State : Up
DB Sync State : inSync
Num Entries : 0
Lcl Deleted Entries : 0
Alarm Entries : 0
Rem Num Entries : 0
Rem Lcl Deleted Entries : 0
Rem Alarm Entries : 0
===============================================================================
MCS Application Stats
===============================================================================
Application : igmp
Num Entries : 0
Lcl Deleted Entries : 0
Alarm Entries : 0
-------------------------------------------------------------------------------
Rem Num Entries : 0
Rem Lcl Deleted Entries : 0
Rem Alarm Entries : 0
-------------------------------------------------------------------------------
Application : igmpSnooping
Num Entries : 0
Lcl Deleted Entries : 0
Alarm Entries : 0
-------------------------------------------------------------------------------
Rem Num Entries : 0
Rem Lcl Deleted Entries : 0
Rem Alarm Entries : 0
-------------------------------------------------------------------------------
Application : subMgmt
Num Entries : 0
Lcl Deleted Entries : 0
Alarm Entries : 0
-------------------------------------------------------------------------------
Rem Num Entries : 0
Rem Lcl Deleted Entries : 0
Rem Alarm Entries : 0
-------------------------------------------------------------------------------
Application : srrp
Num Entries : 0
Lcl Deleted Entries : 0
Alarm Entries : 0
-------------------------------------------------------------------------------
Rem Num Entries : 0
Rem Lcl Deleted Entries : 0
Rem Alarm Entries : 0
===============================================================================
A:pc1#
A:pc1# show redundancy multi-chassis sync peer 10.10.10.102 detail
===============================================================================
Multi-chassis Peer Table
===============================================================================
Peer
-------------------------------------------------------------------------------
Peer IP Address : 10.10.10.102
Description : CO1
Authentication : Enabled
Source IP Address : 10.10.10.101
Admin State : Enabled
-------------------------------------------------------------------------------
Sync-status
-------------------------------------------------------------------------------
Client Applications :
Sync Admin State : Up
Sync Oper State : Up
DB Sync State : inSync
Num Entries : 0
Lcl Deleted Entries : 0
Alarm Entries : 0
Rem Num Entries : 0
Rem Lcl Deleted Entries : 0
Rem Alarm Entries : 0
===============================================================================
MCS Application Stats
===============================================================================
Application : igmp
Num Entries : 0
Lcl Deleted Entries : 0
Alarm Entries : 0
-------------------------------------------------------------------------------
Rem Num Entries : 0
Rem Lcl Deleted Entries : 0
Rem Alarm Entries : 0
-------------------------------------------------------------------------------
Application : igmpSnooping
Num Entries : 0
Lcl Deleted Entries : 0
Alarm Entries : 0
-------------------------------------------------------------------------------
Rem Num Entries : 0
Rem Lcl Deleted Entries : 0
Rem Alarm Entries : 0
-------------------------------------------------------------------------------
Application : subMgmt
Num Entries : 0
Lcl Deleted Entries : 0
Alarm Entries : 0
-------------------------------------------------------------------------------
Rem Num Entries : 0
Rem Lcl Deleted Entries : 0
Rem Alarm Entries : 0
-------------------------------------------------------------------------------
Application : srrp
Num Entries : 0
Lcl Deleted Entries : 0
Alarm Entries : 0
-------------------------------------------------------------------------------
Rem Num Entries : 0
Rem Lcl Deleted Entries : 0
Rem Alarm Entries : 0
===============================================================================
Ports synced on peer 10.10.10.102
===============================================================================
Port/Encap Tag
-------------------------------------------------------------------------------
1/1/1
1-2 r1
===============================================================================
A:pc1#
A:pc1# show redundancy multi-chassis sync statistics
===============================================================================
Multi-chassis Peer Sync Stats
===============================================================================
Peer IP Address : 10.10.10.102
Packets Tx Total : 511
Packets Tx Hello : 510
Packets Tx Data : 0
Packets Tx Other : 1
Packets Tx Error : 0
Packets Rx Total : 511
Packets Rx Hello : 510
Packets Rx Data : 0
Packets Rx Other : 1
Packets Rx Error : 0
Packets Rx Header Err : 0
Packets Rx Body Err : 0
Packets Rx Seq Num Err : 0
===============================================================================
Peer IP Address : 10.10.20.1
Packets Tx Total : 0
Packets Tx Hello : 0
Packets Tx Data : 0
Packets Tx Other : 0
Packets Tx Error : 0
Packets Rx Total : 0
Packets Rx Hello : 0
Packets Rx Data : 0
Packets Rx Other : 0
Packets Rx Error : 0
Packets Rx Header Err : 0
Packets Rx Body Err : 0
Packets Rx Seq Num Err : 0
===============================================================================
A:pc1#
A:pc1# show redundancy multi-chassis sync peer 10.10.10.102 statistics
===============================================================================
Multi-chassis Peer Sync Stats
===============================================================================
Peer IP Address : 10.10.10.102
Packets Tx Total : 554
Packets Tx Hello : 553
Packets Tx Data : 0
Packets Tx Other : 1
Packets Tx Error : 0
Packets Rx Total : 554
Packets Rx Hello : 553
Packets Rx Data : 0
Packets Rx Other : 1
Packets Rx Error : 0
Packets Rx Header Err : 0
Packets Rx Body Err : 0
Packets Rx Seq Num Err : 0
===============================================================================
A:pc1#
===============================================================================
Multi-Chassis MC-IPSec
===============================================================================
Peer Name : (Not Specified)
Peer Addr : 2.2.2.2
Keep Alive Intvl: 10 Hold on Nbr Fail : 3
BFD Intf Name : None
BFD Dest Addr :
Last update : 03/20/2012 22:48:55
===============================================================================
Multi-Chassis IPsec Multi Active Tunnel-Group Table
===============================================================================
ID Peer Group Priority Preempt Admin State Mastership
-------------------------------------------------------------------------------
1 1 100 Disabled Up eligible
-------------------------------------------------------------------------------
Multi Active Tunnel Group Entries found: 1
===============================================================================
mc-ring peer ip-address ring
sync-tag ring-node
[ring-node-name [detail
|statistics
]]
show redundancy multi-chassis mc-ring peer 10.0.0.2 ring ring11 detail
==============================================================================
Multi-Chassis MC-Ring Detailed Information
==============================================================================
Peer : 10.0.0.2
Sync Tag : ring11
Port ID : 1/1/3
Admin State : inService
Oper State : connected
Admin Change : 01/07/2008 21:40:07
Oper Change : 01/07/2008 21:40:24
Failure Reason : None
------------------------------------------------------------------------------
In Band Control Path
------------------------------------------------------------------------------
Service ID : 10
Interface Name : to_an1
Oper State : connected
Dest IP : 10.10.0.2
Src IP : 10.10.0.1
------------------------------------------------------------------------------
VLAN Map B Path Provisioned
------------------------------------------------------------------------------
range 13-13
range 17-17
------------------------------------------------------------------------------
VLAN Map Excluded Path Provisioned
------------------------------------------------------------------------------
range 18-18
------------------------------------------------------------------------------
VLAN Map B Path Operational
------------------------------------------------------------------------------
range 13-13
range 17-17
------------------------------------------------------------------------------
VLAN Map Excluded Path Operational
------------------------------------------------------------------------------
range 18-18
==============================================================================
*A:ALA-48>show>redundancy>multi-chassis# mc-ring peer 192.251.10.104
==============================================================================
MC Ring entries
==============================================================================
Sync Tag Oper State Failure Reason
------------------------------------------------------------------------------
No. of MC Ring entries: 0
==============================================================================
show redundancy multi-chassis mc-ring peer 10.0.0.2
==============================================================================
MC Ring entries
==============================================================================
Sync Tag Oper State Failure Reason
------------------------------------------------------------------------------
ring11 connected None
ring12 shutdown None
------------------------------------------------------------------------------
No. of MC Ring entries: 4
==============================================================================
show redundancy multi-chassis mc-ring peer 10.0.0.2 ring ring11 ring-node an1 detail
==============================================================================
Multi-Chassis MC-Ring Node Detailed Information
==============================================================================
Peer : 10.0.0.2
Sync Tag : ring11
Node Name : an1
Oper State Loc : connected
Oper State Rem : notTested
In Use : True
Admin Change : 01/07/2008 21:40:07
Oper Change : 01/07/2008 21:40:25
Failure Reason : None
------------------------------------------------------------------------------
Ring Node Connectivity Verification
------------------------------------------------------------------------------
Admin State : inService
Service ID : 11
VLAN Tag : 11
Dest IP : 10.11.3.1
Src IP : None
Interval : 1 minutes
Src MAC : None
==============================================================================
show redundancy multi-chassis mc-ring peer 10.0.0.2 ring ring11 ring-node
==============================================================================
MC Ring Node entries
==============================================================================
Name Loc Oper St. Failure Reason
In Use Rem Oper St.
------------------------------------------------------------------------------
an1 connected None
Yes notTested
an2 connected None
Yes notTested
------------------------------------------------------------------------------
No. of MC Ring Node entries: 2
==============================================================================
*A:ALA-48>show>redundancy>multi-chassis# mc-ring peer 192.251.10.104 statistics
==============================================================================
MC Ring statistics for peer 192.251.10.104
==============================================================================
Message Received Transmitted
------------------------------------------------------------------------------
MCS ID Request 0 0
MCS ID Response 0 0
Ring Exists Request 0 0
Ring Exists Response 0 0
Keepalive 0 0
------------------------------------------------------------------------------
Total 0 0
==============================================================================
*A:ALA-48>show>redundancy>multi-chassis#
*A:ALA-48>show>redundancy>multi-chassis# mc-ring global-statistics
==============================================================================
Global MC Ring statistics
==============================================================================
Rx : 0
Rx Too Short : 0
Rx Wrong Authentication : 0
Rx Invalid TLV : 0
Rx Incomplete : 0
Rx Unknown Type : 0
Rx Unknown Peer : 0
Rx Unknown Ring : 0
Rx Unknown Ring Node : 0
Tx : 36763
Tx No Buffer : 0
Tx Transmission Failed : 0
Tx Unknown Destination : 0
Missed Configuration Events : 0
Missed BFD Events : 0
==============================================================================
*A:ALA-48>show>redundancy>multi-chassis#
lease-state [
wholesaler service-id] [
sap sap-id|
sdp sdp-id:vc-id|
interface interface-name|
ip-address ip-address[/
mask]|
chaddr ieee-address|
mac ieee-address|{[
port port-id] [
no-inter-dest-id |
inter-dest-id inter-dest-id]}] [
session {
none|
ipoe}] [
detail]
This command displays DHCP lease state information. Note that the
wholesaler service-id parameter is applicable only in the VPRN context.
Shows information for the specified IP address and mask.
*A:ALA-48>config# show service id 101 dhcp lease-state
===============================================================================
DHCP lease state table, service 101
===============================================================================
IP Address Mac Address Sap/Sdp Id Remaining Lease MC
LifeTime Origin Stdby
-------------------------------------------------------------------------------
102.1.1.52 00:00:1f:bd:00:bb lag-1:101 00h02m56s DHCP-R
103.3.2.62 00:00:1f:bd:00:c6 lag-1:105 00h02m59s RADIUS
-------------------------------------------------------------------------------
Number of lease states : 2
===============================================================================
*A:ALA-48>config#
*A:ALA-48>config# show service id 105 dhcp lease-state wholesaler 101
===============================================================================
DHCP lease state table, service 105
===============================================================================
IP Address Mac Address Sap/Sdp Id Remaining Lease MC
LifeTime Origin Stdby
-------------------------------------------------------------------------------
Wholesaler 101 Leases
-------------------------------------------------------------------------------
103.3.2.62 00:00:1f:bd:00:c6 lag-1:105 00h00m39s RADIUS
-------------------------------------------------------------------------------
Number of lease states : 1
===============================================================================
*A:ALA-48>config#
lease-state [detail
] [wholesaler
service-id] [session
{none
|ipoe
|ppp
}]|
lease-state [detail
] interface
interface-name [wholesaler
service-id] [session
{none
|ipoe
|ppp
}]
lease-state [detail
] ipv6-address ipv6-prefix[/prefix-length] [wholesaler
service-id] [session
{none
|ipoe
|ppp
}]
lease-state [detail
] mac
ieee-address [wholesaler
service-id] [session
{none
|ipoe
|ppp
}]
This command displays DHCP6 lease state information. Note that the
wholesaler service-id parameter is applicable only in the VPRN context.
v6Shows information for the specified IPv6 address and mask.
statistics [[sap
sap-id]|[sdp
sdp-id:vc-id]|[interface
interface-name]]
*A:ALA-48# show service id 88 dhcp statistics interface SpokeTerm
===================================================================
DHCP Statistics for interface SpokeTerm
===================================================================
Rx Packets : 0
Tx Packets : 0
Rx Malformed Packets : 0
Rx Untrusted Packets : 0
Client Packets Discarded : 0
Client Packets Relayed : 0
Client Packets Snooped : 0
Client Packets Proxied (RADIUS) : 0
Client Packets Proxied (Lease-Split) : 0
Server Packets Discarded : 0
Server Packets Relayed : 0
Server Packets Snooped : 0
DHCP RELEASEs Spoofed : 0
DHCP FORCERENEWs Spoofed : 0
===================================================================
*A:ALA-48#
summary [interface
interface-name | saps
]
IES:
*A:ALA-48>show>service>id>dhcp# summary
===========================================================
DHCP Summary, service 700
===========================================================
Sap/Sdp Snoop Used/ Info Admin
Provided Option State
-----------------------------------------------------------
sap:1/1/9:0 No 0/0 Keep Down
sap:1/1/25:0 No 0/0 Keep Down
sdp:8:700 No N/A N/A N/A
-----------------------------------------------------------
Number of Entries : 3
-----------------------------------------------------------
*A:ALA-48>show>service>id>dhcp#
VPLS:
*A:ALA-49>show>service# id 700 dhcp summary
=======================================================================
DHCP Summary, service 700
=======================================================================
Sap/Sdp Snoop Used/ Arp Reply Info Admin
Provided Agent Option State
-----------------------------------------------------------------------
sap:1/1/9:0 No 0/0 No Keep Down
sdp:2:222 No N/A N/A N/A N/A
sdp:2:700 No N/A N/A N/A N/A
-----------------------------------------------------------------------
Number of Entries : 3
-----------------------------------------------------------------------
*A:ALA-49>show>service#
VPRN:
*A:ALA-49>show>service# id 1 dhcp summary
===============================================================================
DHCP Summary, service 1
===============================================================================
Interface Name Arp Used/ Info Admin
SapId/Sdp Populate Provided Option State
-------------------------------------------------------------------------------
SpokeSDP No 0/0 Keep Down
sdp:spoke-3:4 0/0
test No 0/0 Keep Down
sap:9/1/4:50/5 0/0
to-ce1 No 0/0 Keep Up
sap:1/1/10:1 0/0
-------------------------------------------------------------------------------
Interfaces: 3
===============================================================================
*A:ALA-49>show>service#
*A:ALA-48# show service id 88 dhcp summary saps
===============================================================================
DHCP Summary, service 88
===============================================================================
Interface Name Arp Used/ Info Admin
SapId/Sdp Populate Provided Option State
-------------------------------------------------------------------------------
SpokeTerm No 0/0 Keep Up
sdp:spoke-3:3 0/0
new-if No 0/1 Keep Up
sap:1/2/19:0 0/1
test123 No 0/0 Keep Up
sap:3/2/4:50/5 0/0
testabc No 0/0 Keep Up
sap:1/2/20:0 0/0
-------------------------------------------------------------------------------
Interfaces: 4
===============================================================================
*A:ALA-48#
*A:ALA-48# show service id 88 dhcp summary interface SpokeTerm
===============================================================================
DHCP Summary, service 88
===============================================================================
Interface Name Arp Used/ Info Admin
SapId/Sdp Populate Provided Option State
-------------------------------------------------------------------------------
SpokeTerm No 0/0 Keep Up
sdp:spoke-3:3 0/0
-------------------------------------------------------------------------------
Interfaces: 1
===============================================================================
*A:ALA-48#
A:SUB-Dut-A# show router 1000 dhcp statistics
==================================================================
DHCP Global Statistics (Service: 1000)
===================================================================
Rx Packets : 16000
Tx Packets : 15041
Rx Malformed Packets : 0
Rx Untrusted Packets : 0
Client Packets Discarded : 423
Client Packets Relayed : 0
Client Packets Snooped : 0
*Client Packets Proxied (RADIUS) : 0
Client Packets Proxied (Lease-Split) : 0 *
Server Packets Discarded : 0
Server Packets Relayed : 0
Server Packets Snooped : 0
*DHCP RELEASEs Spoofed : 0
DHCP FORCERENEWs Spoofed : 0 *
===================================================================
A:SUB-Dut-A#
*A:ALA-48>show>router>dhcp# summary
===================================================================
Interface Name Arp Used/ Info Admin
Populate Provided Option State
-------------------------------------------------------------------
ccaiesif No 0/0 Keep Down
ccanet6 No 0/0 Keep Down
iesBundle No 0/0 Keep Up
spokeSDP-test No 0/0 Keep Down
test No 0/0 Keep Up
test1 No 0/0 Keep Up
test2 No 0/0 Keep Up
testA No 0/0 Keep Up
testB No 0/0 Keep Up
testIES No 0/0 Keep Up
to-web No 0/0 Keep Up
-------------------------------------------------------------------
Interfaces: 11
===================================================================
*A:ALA-48>show>router>dhcp#
*A:ALA-48>show>service>id>igmp-snooping>snooping# all
===============================================================================
IGMP Snooping info for service 750
===============================================================================
IGMP Snooping Base info
-------------------------------------------------------------------------------
Admin State : Up
Querier : No querier found
-------------------------------------------------------------------------------
Sap/Sdp Oper MRtr Send Max Num Num
Id State Port Queries Groups Groups
-------------------------------------------------------------------------------
sap:1/1/7:0 Down No Disabled No Limit 0
sdp:1:22 Down No Disabled No Limit 0
sdp:8:750 Down No Disabled No Limit 0
-------------------------------------------------------------------------------
IGMP Snooping Querier info
-------------------------------------------------------------------------------
No querier found for this service.
-------------------------------------------------------------------------------
IGMP Snooping Multicast Routers
-------------------------------------------------------------------------------
MRouter Sap/Sdp Id Up Time Expires Version
-------------------------------------------------------------------------------
Number of mrouters: 0
-------------------------------------------------------------------------------
IGMP Snooping Proxy-reporting DB
-------------------------------------------------------------------------------
Group Address Mode Type Up Time Expires Num Src
-------------------------------------------------------------------------------
Number of groups: 0
------------------------------------------------------------------------------
IGMP Snooping SAP 1/1/7:0 Port-DB
-------------------------------------------------------------------------------
Group Address Mode Type Up Time Expires Num Src
-------------------------------------------------------------------------------
Number of groups: 0
-------------------------------------------------------------------------------
IGMP Snooping SDP 1:22 Port-DB
-------------------------------------------------------------------------------
Group Address Mode Type Up Time Expires Num Src
-------------------------------------------------------------------------------
Number of groups: 0
-------------------------------------------------------------------------------
IGMP Snooping SDP 8:750 Port-DB
-------------------------------------------------------------------------------
Group Address Mode Type Up Time Expires Num Src
-------------------------------------------------------------------------------
Number of groups: 0
-------------------------------------------------------------------------------
IGMP Snooping Static Source Groups
-------------------------------------------------------------------------------
IGMP Snooping Statistics
-------------------------------------------------------------------------------
Message Type Received Transmitted Forwarded
-------------------------------------------------------------------------------
General Queries 0 0 0
Group Queries 0 0 0
Group-Source Queries 0 0 0
V1 Reports 0 0 0
V2 Reports 0 0 0
V3 Reports 0 0 0
V2 Leaves 0 0 0
Unknown Type 0 N/A 0
-------------------------------------------------------------------------------
Drop Statistics
-------------------------------------------------------------------------------
Bad Length : 0
Bad IP Checksum : 0
Bad IGMP Checksum : 0
Bad Encoding : 0
No Router Alert : 0
Zero Source IP : 0
Send Query Cfg Drops : 0
Import Policy Drops : 0
Exceeded Max Num Groups : 0
===============================================================================
*A:ALA-48>show>service>id>snooping#
*A:ALA-48# show service id 700 igmp-snooping mrouters
===============================================================================
IGMP Snooping Multicast Routers for service 700
===============================================================================
MRouter Sap/Sdp Id Up Time Expires Version
-------------------------------------------------------------------------------
Number of mrouters: 0
===============================================================================
*A:ALA-48#
A:ALA-1>show>service>id>snooping# mvr
===============================================================================
IGMP Snooping Multicast VPLS Registration info for service 10
===============================================================================
IGMP Snooping Admin State : Up
MVR Admin State : Up
MVR Policy : mvr-policy
-------------------------------------------------------------------------------
Local SAPs/SDPs
-------------------------------------------------------------------------------
Svc Id Sap/Sdp Oper From Num Local
Id State VPLS Groups
-------------------------------------------------------------------------------
100 sap:1/1/10:10 Up Local 100
100 sap:1/1/10:20 Up Local 100
-------------------------------------------------------------------------------
MVR SAPs (from-vpls=10)
-------------------------------------------------------------------------------
Svc Id Sap/Sdp Oper From Num MVR
Id State VPLS Groups
-------------------------------------------------------------------------------
20 sap:1/1/4:100 Up 10 100
30 sap:1/1/31:10.10 Up 10 100
===============================================================================
A:ALA-1>show>service>id>snooping#
A:ALA-1>show>service>id>snooping# port-db sap 1/1/2
===============================================================================
IGMP Snooping SAP 1/1/2 Port-DB for service 10
===============================================================================
Group Address Mode Type Up Time Expires Num Sources
-------------------------------------------------------------------------------
225.0.0.1 include dynamic 0d 00:04:44 0s 2
-------------------------------------------------------------------------------
Number of groups: 1
===============================================================================
A:ALA-1>show>service>id>snooping# port-db sap 1/1/2 detail
===============================================================================
IGMP Snooping SAP 1/1/2 Port-DB for service 10
===============================================================================
IGMP Group 225.0.0.1
-------------------------------------------------------------------------------
Mode : include Type : dynamic
Up Time : 0d 00:04:57 Expires : 0s
Compat Mode : IGMP Version 3
V1 Host Expires : 0s V2 Host Expires : 0s
-------------------------------------------------------
Source Address Up Time Expires Type Fwd/Blk
-------------------------------------------------------
1.1.1.1 0d 00:04:57 20s dynamic Fwd
1.1.1.2 0d 00:04:57 20s dynamic Fwd
-------------------------------------------------------------------------------
Number of groups: 1
===============================================================================
A:ALA-1>show>service>id>snooping#
A:ALA-1>show>service>id>snooping# proxy-db
===============================================================================
IGMP Snooping Proxy-reporting DB for service 10
===============================================================================
Group Address Mode Up Time Num Sources
-------------------------------------------------------------------------------
225.0.0.1 include 0d 00:05:40 2
-------------------------------------------------------------------------------
Number of groups: 1
===============================================================================
A:ALA-1>show>service>id>snooping# proxy-db detail
===============================================================================
IGMP Snooping Proxy-reporting DB for service 10
===============================================================================
-------------------------------------------------------------------------------
IGMP Group 225.0.0.1
-------------------------------------------------------------------------------
Up Time : 0d 00:05:54 Mode : include
------------------------------
Source Address Up Time
------------------------------
1.1.1.1 0d 00:05:54
1.1.1.2 0d 00:05:54
-------------------------------------------------------------------------------
Number of groups: 1
===============================================================================
A:ALA-1>show>service>id>snooping#
A:ALA-1>show>service>id>snooping# querier
===============================================================================
IGMP Snooping Querier info for service 10
===============================================================================
Sap Id : 1/1/1
IP Address : 10.10.10.1
Expires : 6s
Up Time : 0d 00:56:50
Version : 3
General Query Interval : 5s
Query Response Interval : 2.0s
Robust Count : 2
===============================================================================
A:ALA-1>show>service>id>snooping#
static [sap
sap-id | sdp
sdp-id:vc-id]
A:ALA-1>show>service>id>snooping# static
===============================================================================
IGMP Snooping Static Source Groups for SAP 1/1/2
-------------------------------------------------------------------------------
Source Group
-------------------------------------------------------------------------------
* 225.0.0.2
* 225.0.0.3
-------------------------------------------------------------------------------
Static (*,G)/(S,G) entries: 2
-------------------------------------------------------------------------------
IGMP Snooping Static Source Groups for SDP 10:10
-------------------------------------------------------------------------------
Source Group
-------------------------------------------------------------------------------
1.1.1.1 225.0.0.10
-------------------------------------------------------------------------------
Static (*,G)/(S,G) entries: 1
===============================================================================
A:ALA-1>show>service>id>snooping#
A:ALA-1>show>service>id>snooping# statistics
===============================================================================
IGMP Snooping Statistics for service 1
===============================================================================
Message Type Received Transmitted Forwarded
-------------------------------------------------------------------------------
General Queries 4 0 4
Group Queries 0 0 0
Group-Source Queries 0 0 0
V1 Reports 0 0 0
V2 Reports 0 0 0
V3 Reports 0 0 0
V2 Leaves 0 0 0
Unknown Type 0 N/A 0
-------------------------------------------------------------------------------
Drop Statistics
-------------------------------------------------------------------------------
Bad Length : 0
Bad IP Checksum : 0
Bad IGMP Checksum : 0
Bad Encoding : 0
No Router Alert : 0
Zero Source IP : 0
Send Query Cfg Drops : 0
Import Policy Drops : 0
Exceeded Max Num Groups : 0
MVR From VPLS Cfg Drops : 0
MVR To SAP Cfg Drops : 0
===============================================================================
A:ALA-1>show>service>id>snooping#
A:ALA-48>config>router>pim# show router pim mc-ecmp-balance
===============================================================================
PIM ECMP Balance
===============================================================================
MC-ECMP-Balance : Disabled
Rebalance in progress : No
Last Rebalance Time : 11/13/2007 09:03:10
Rebalance Type : Unknown
Optional Threshold Used : 0
Mc Ecmp Balance Hold Time : None
===============================================================================
A:ALA-48>config>router>pim#
Bandwidth Policies : 2
==============================================================================
*A:Dut-C# *show mcast-management bandwidth-policy detail*
===============================================================================
Bandwidth Policy Details
===============================================================================
Policy : gie
-------------------------------------------------------------------------------
Admin BW Thd : 10 kbps Falling Percent RST: 50
Mcast Pool Total : 10 Mcast Pool Resv Cbs: 50
Slope Policy : default
Primary
Limit : 2000 mbps Cbs : 5.00
Mbs : 7.00 High Priority : 10
Secondary
Limit : 1500 mbps Cbs : 30.00
Mbs : 40.00 High Priority : 10
Ancillary
Limit : 5000 mbps Cbs : 65.00
Mbs : 80.00 High Priority : 10
-------------------------------------------------------------------------------
Policy : default
-------------------------------------------------------------------------------
Admin BW Thd : 10 kbps Falling Percent RST: 50
Mcast Pool Total : 10 Mcast Pool Resv Cbs: 50
Slope Policy : default
Primary
Limit : 2000 mbps Cbs : 5.00
Mbs : 7.00 High Priority : 10
Secondary
Limit : 1500 mbps Cbs : 30.00
Mbs : 40.00 High Priority : 10
Ancillary
Limit : 5000 mbps Cbs : 65.00
Mbs : 80.00 High Priority : 10
===============================================================================
Bandwidth Policies : 2
===============================================================================
*A:Dut-C#
channel [router
router-instance | vpls
service-id] [mda
slot[/mda]] [group
ip-address [source
ip-address]] [path
path-type] [detail
]
*A:Dut-C# *show mcast-management channel* ===============================================================================
Multicast Channels
===============================================================================
Legend : D - Dynamic E - Explicit
===============================================================================
Source Address Slot/Mda Current Bw
Path D/E
Group Address Highest Bw
-------------------------------------------------------------------------------
10.10.4.10 10/2 134646
Ancillary D
225.0.0.0 134646
===============================================================================
Multicast Channels : 1
===============================================================================
*A:Dut-C#
*A:Dut-C# *show mcast-management channel detail*
===============================================================================
Multicast Channels
===============================================================================
Source Address : 10.10.4.10
Group Address : 225.0.0.0
-------------------------------------------------------------------------------
Slot/Mda : 10/2 Current Bw : 134646 kbps
Dynamic/Explicit : Dynamic Current Path : Ancillary
Oper Admin Bw : 0 kbps Preference : 0
Ing last highest : 134646 Ing sec highest : 109532
Black-hole rate : None Blackhole : No
Time remaining : 30 seconds
===============================================================================
Multicast Channels : 1
===============================================================================
*A:Dut-C#
mda [slot
[/mda]] [path
path-type]
*A:Dut-C# *show mcast-management mda 10/2*
==============================================================================
MDA 10/2
==============================================================================
S/M Bw-policy Type Limit In-use-Bw
Admin
------------------------------------------------------------------------------
10/2 gie primary 0 Ms 0 Ms up
gie secondary 0 Ms 0 Ms up
gie ancillary 0 Ms 219. 64 Ms up
===============================================================================
*A:Dut-C#
hosts [group
grp-address] [detail
] [fwd-service
service-id] [grp-interface
ip-int-name]
hosts [host
ip-address] [group
grp-address] [detail
]
interface [ip-int-name|ip-address] [group
] [grp-ip-address] [detail
]
arp-host { mac
ieee-address | sap
sap-id | ip-address
ip-address[/mask] }
arp-host [
port port-id] [
inter-dest-id intermediate-destination-id |
no-inter-dest-id]
fdb {all
| mac
ieee-address | sap
sap-id] | mesh-sdp
sdp-id[:
vc-id] | spoke-sdp
sdp-id:
vc-id}
|
Values
|
sdp-id[:vc-id] sdp-id 1 — 17407 vc-id 1 — 4294967295 sdp-id:vc-id sdp-id 1 — 17407 vc-id 1 — 4294967295
|
mesh-sdp sdp-id[:
vc-id] ingress-vc-label
sap sap-id {all
| counters
| stp
}
sap sap-id {all
| counters
| stp
}
spoke-sdp sdp-id[:
vc-id] {all
| counters
| stp
}
RSTP automatically falls back to STP mode when it receives an STP BPDU. The clear detected-protocols command forces the system to revert to the default RSTP mode on the SAP or spoke SDP.
lease-state [port
port-id] [inter-dest-id
intermediate-destination-id] [no-dhcp-release
]
lease-state [port
port-id] no-inter-dest-id
[no-dhcp-release
]
The IP address of the IP interface. The ip-address portion of the
address command specifies the IP host address that will be used by the IP interface within the subnet. This address must be unique within the subnet and specified in dotted decimal notation. Allowed values are IP addresses in the range 1.0.0.0 – 223.255.255.255 (with support of /31 subnets).
port-db {sap
sap-id | sdp
sdp-id:vc-id} [group
grp-address [source
ip-address]]
port-db sap sap-id group
grp-ipv6-address source
src-ipv6-address
port-db sdp sdp-id:vc-id group
grp-ipv6-address source
src-ipv6-address
[no
] mcast-reporting-dest
[dest-name]
[no
] igmp
[host
ip-address] [group
grp-address]
The no form of the command disables ARP host debugging
The no form of the command disables MLD-snooping debugging
The no form of the command disables the MLD tracing detail level.
The no form of the command disables disables the MAC debugging.
mode {dropped-only
|ingr-and-dropped
|egr-ingr-and-dropped
}
The no form of the command disables the configures the MLD tracing mode.
The no form of the command disables the debugging for the SAP.
The no form of the command disables the debugging for the SDP.
